• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3192-3202
• /
• 2014

This study has its purposes on analyzing specific features of the elements according to scales of 32 main buddhist sancta among wooden temples with gable roof that are nationally designated as cultural assets, and analyzing influences and proportional relations between main and submaterials, so that it could be basic and objective data for restore and repair cultural assets in the future. Results of the study are following. First of all, the average plane proportion of doritong (facade) and yangtong (side) in 3-room building is about 1.31:1, while it is 1.70:1 in 5-room building. Secondly, as a result of analyzing the locational proportion and thickness of pillars at each location, floor room turned out to have wider space between pillars than that of edge room or side room in both cases of 3 and 5-room buildings. In the mean time, for the average thickness of the pillars in 3-room building, it was 491mm for corner pillars, 433mm for general pillars in cases of 3-room building, while it was 595 and 511mm respectively in cases of 5-room building. The reason why corner pillars are 60~80mm thicker than general ones in average, is determined to considered structural stability and optical illusion. For the third, as a result of analyzing the influences on pillar thickness, eaves projection and eaves height according to the scale(dimension) of buildings, 3-room buildings have outstanding correlation as its scale(dimension) goes bigger, while 5-room ones are not very much influenced by its scale(dimension). For the fourth, as a result of the relation between pillars and eaves, both of 3 and 5-room buildings have longer-projected and higher eaves as their pillars go taller; especially height of eaves turns out to have very close relation between length of pillars. In addition to that, both of 3 and 5-room buildings have much projected eaves as the eaves go higher.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.109-117
• /
• 2010

This study conducts a case analysis based on the Olympic Forest Park in Beijing, which is specially designed for the 2008 Beijing Olympic Games. The construction of the Olympic Forest Park not only comprises the design philosophy of city parks and forest parks, but also applies Chinese traditional design elements. This study, first, researches on the design concepts of city parks in the context of traditional landscape architecture elements from both physical and cultural perspectives. The author studies the related materials including the"General Introduction of the Beijing Olympic Forest Park Landscape Plan", and employs the approaches of site investigation and user survey and interview, to analyze the cognition and preference degree of the various traditional design elements displayed in the Olympic Forest Park. To quantize the survey data on the Olympic Forest Park, this study uses the spss(v17.0) software to run a frequency analysis and presents detailed demographic, frequencies and means analyses. The author then reaches the conclusion on the preference degree of the various Chinese traditional design elements in the Olympic Forest Park. According to the analysis result, the elements that appear with the highest frequencies are mountains and waters, traditional garden plants and artistic conception. The most favorable elements are in sequence traditional garden architecture, traditional garden philosophical thinking and artistic conception. The Olympic Forest Park in Beijing is constructed on the basis of multiple design elements, comprising Chinese traditional design elements and the historical axis. As an exemplification of contemporary city park that reflects the variation of age and development of society, the Olympic Forest Park offers the reference for the selection of traditional design elements in the future schemes of city parks. However, due to the difficulty in gathering materials about the Forest Park and the limitations on the location and time constrain of the survey, there exists lack of sufficiency that could be improved in the future.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.3
• /
• pp.11-24
• /
• 2020

The purpose of this study was to re-examine the neglected and forgotten Cheongdo Geoyeonjeong, to correct the wrong contents, examine the changes and conditions of the garden, and to establish basic data on the components of the forest in the future. In addition, it was extended to the Gongampungbyeog Cliff, the influence area of the Geoyeonjeongwonlim, and the results of the study were as follows; First, Based on the recitation of "Seonyu pungryu(仙遊風流)" in the "Cheongsuheon-yugo(聽水軒遺稿),", Dongchangcheon Stream and Gongampungbyeog(孔巖楓壁) were influenced by the outer gardens of the Georyeonjeongwonrim. Second, Small pavilion was built and arranged under the rock of Byeongam(Byeongpungbawi) in the management history of Geoyeonjeong Pavilion. The records show that Cheongsuheon used the Geoyeonjeong Pavilion as the original forest and even recognized Oewon, which is a scenic influence, as the Gongampungbyeog Cliff. Third, Many of the poems related to Gongam were recognized as Seunggyeong, which represents the Unmun area, and the eight scenery of Cheongdo and Unmungugok were established here as proof that Gongampungbyeog Cliff was very faithful to the traditional Seunggyeong aspect of Gongampungbyeog Cliff, and the crystalline structure of the location was implied as an external source of Geoyeonjeongwonlim. Fourth, The lower part of Dongchangcheon Stream, which stretches from Geoyeonjeongwonrim to Gongam, is filled with attractions consisting of cancerous areas such as Punghodae, Moseongam, Buangdae, Gokcheondae, Saganjeong, Hakgadae, and Hyeongjeam, which provide a clearer picture of the space and landscape of the Geyeonjeongwonrim Outer Garden. Fifth, The expression "dragging water, spilling it into the courtyard, and sending it back to the downtown of the field" of the Cheongsuheon-yugo suggests that the site of Geoyeonjeong Pavilion was originally a prevention. It is also inferred that Cheng Shu-heon also wanted to respect runners and pursue natural views like runners. Sixth, The record of planting a description of spring water and willow trees in "Geoyeonjeong Manyeong(居然亭晩影)」" and "Sanggukseol(霜菊說)」" suggests that the chrysanthemum was planted and planted, and that the chrysanthemum was used to describe the Osanggojeol(傲霜孤節), which means that he would not yield and keep his incision alone despite severe frost. Seventh, It is believed that the writing was written by Cheongsuheon in 1844 during the period of the creation of the Wonrim. The rock letters on the floor of Geoyeonjeong suggest the names of the receiving and the winning prizes. Most of the passages are based on nuclear power plants, including Muidogyo of the Zhuzi, and most of them incorporate the virtues of the Gunja and the natural views of the Eunja. In addition, the rock writing 'Gyeong(敬)' or 'Uidang(義堂)' is a substitute for special worship objects or introspection, adding to the significance and scenic properties of the Georyeon Garden Forest.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.177-188
• /
• 1989

The habitat typing method of classification based on community has been developed on many forested areas in the ROCKY MOUNTAINS of WESTERN NORTH AMERICA, and is being used in providing an objective principle of guide for classification of forest sites, land classification, vertical distribution and multipurpose management of forest. I actually made a trial of forest habitat type classification - The methodology can be segmented into a number of tasks including reconnaissance, selection of stands to be sampled, location of plots, data gathering, preliminary and computer analysis, preparation of key- and map of habitat type and description for each habitat type in a view of forest management - on UNIVERSITY OF MONTANA FORESTS in order to examine whether its application is fit or not in korean forest circumstances : these are composed mainly of artificial forest and forest in the early stage of succession. The main results obtained from this study were summarized as follows 1. A hierarchical classification-Climax, Habitat type and Phases-of forest sites was developed using the habitat typing method of classification. 2. A diagnostic key is provided for field identification of the types based upon presence and number of indicator species, and forest managers could prepare a map of habitat type and classify forest habirat types by reference to it. 3. The classified habitat types were considered to be effective on providing an objective principle of guide for multipurpose management of forest including potential productivity for timber, feed productivity of forage and wildlife, selection of the right species in the right sites, application of method of treatment and so forth. 4. Forest habitat type classifications based upon extrapolation which used relict species and associated stands is considered to be suitable for korean forest circumstances and objective in studying potential vegetation, vertical and horizontal distribution of forest.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.131-141
• /
• 2011

Boring caracteristics, boring rate, and predation, rates on the valves of the seed and adult clams of Meretrix petechialis by Glossaulax didyma didyma in the shellfish aquafarm and the indoor rearing aquarium were investigated by various morphometric data. The investigations were carried out from June to September, 2007. The morphology of drilled holes on the valves of M. petechialis showed the crater type as seen in the spats of Ruditapes philippinarum and M. lusoria. The sizes of the outer diameters of holes were greater than the inner diameters of the holes on the valves of M. petechialis in the shellfish aquafarm and the indoor aquarium at the laboratory. On the whole, the sizes of the holes on the valves of the seeds of M. petechialis was smaller than those bored holes on the adult valves. The location of the bored holes on the valves of the seeds varied widely with the the sizes of the individuals of M. petichialis, while most of holes on the valves of adult clams were located near the umbo position of the valves of the clams in the shellfish aquafarm and the indoor aquarium at the laboratory. On the whole, the outer and inner diameters of the bored holes increased with increase of shell lengths of the clams in the shellfish aquafarm and the indoor rearing aquarium at the laboratory. The authors could confirm experimentally the boring snail, G. didyma didyma, drilled the seeds and adult clams of M. petechialis. In the experiments for 15 days (three times repeated) in the indoor rearing aquarium at the laboratory, the mortality of dead shells to total shells of M. petechialis by boring snail Glossaulax didyma didyma was totally average 41.5%, and percent of drilled shells to total dead shells of clams by the boring snail was average 47.1%. Of total shells, percent of drilled shells to total shells of clams by the boring snail was totally average 19.3%. Predation of G. didyma didyma were greater at night than the day time. Average 0.5 seed and adult individuals of M. petewchialis were consumed per G. didyma didyma, per day. Predation varied with shell lengths of M. petechialis and shell widths of G. didyma didyma.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.15-30
• /
• 1998

The variation of the catches of Skipjack(Euthynnus pelamis) and the relationships between the SST and the fishing ground is examined using the catches data of skipjack obtained by Iwawada Fisheries Cooperative of Chiba Prefecture in Japan from 1982 to 1988. The annual mean catch for Skipjack was 151,375.1kg. the annual fluctuation of catch was that the catch in 1984 was increasing, but it was decreased less than 50% in 1985, and was repeated after being a little recovered in 1986, and it was recovered with the level of 1984 in 1988. The fluctuation of catch for Skipjack in every fishing term is that daily mean catch of the primary fishing term (January, February and March) is 894.6kg, but the middle fishing term(April and May) more than four times of the primary fishing term is 3,666.0kg, the last fishing term(June and July) was decreasing at 767.9kg and the fishing ground gradually becomes extinct. The annual mean SST in fishing ground was an extent of from $19.0^{\circ}C$ to $20.2^{\circ}C$, the mean SST of every year except 1983 was from $19.0^{\circ}C$ to $19.9^{\circ}C$. It is said that the optimum SST of Skipjack in Sotobo sea area is the degree of $19.0^{\circ}C$. Therfore, the thing which will guess the time and the location appeared the optimum SST is the very important factor to operate efficiently. About the extent of SST in fishing ground, it was from $17.0^{\circ}C$ to $19.0^{\circ}C$ on March, from $17.5^{\circ}C$ to $20.5^{\circ}C$ on April and from $17.5^{\circ}C$ to $23.5^{\circ}C$ on May, which the extent of SST was gradually larger and larger, on June from $21.0^{\circ}C$ to $23.5^{\circ}C$, fishing ground was formed only the degree of SST more than $21.0^{\circ}C$.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.903-916
• /
• 2021

An area's topography refers to the shape of the earth's surface, described by its elevation, slope, and aspect, among other features. The topographical conditions determine energy flowsthat move water and energy from higher to lower elevations, such as how much solar energy will be received and how much wind or rain will affect it. Another common factor, the topographic wetness index (TWI), is a calculation in digital elevation models of the tendency to accumulate water per slope and unit area, and is one of the most widely referenced hydrologic topographic factors, which helps explain the location of forest vegetation. Analyses of topographical factors can be calculated using a geographic information system (GIS) program based on digital elevation model (DEM) data. Recently, a large number of free open source software (FOSS) GIS programs are available and developed for researchers, industries, and governments. FOSS GIS programs provide opportunitiesfor flexible algorithms customized forspecific user needs. The majority of biodiversity in island areas exists at about 20% higher elevations than in land ecosystems, playing an important role in ecological processes and therefore of high ecological value. However, island areas are vulnerable to disturbances and damage, such as through climate change, environmental pollution, development, and human intervention, and lacks systematic investigation due to geographical limitations (e.g. remoteness; difficulty to access). More than 4,000 of Korea's islands are within a few hours of its coast, and 88% are uninhabited, with 52% of them forested. The forest ecosystems of islands have fewer encounters with human interaction than on land, and therefore most of the topographical conditions are formed naturally and affected more directly by weather conditions or the environment. Therefore, the analysis of forest topography in island areas can be done more precisely than on its land counterparts, and therefore has become a major focus of attention in Korea. This study is focused on calculating the performance of different topographical factors using FOSS GIS programs. The test area is the island forests in Korea's south and the DEM of the target area was processed with GRASS GIS and SAGA GIS. The final slopes and TWI maps were produced as comparisons of the differences between topographic factor calculations of each respective FOSS GIS program. Finally, the merits of each FOSS GIS program used to calculate the topographic factors is discussed.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.28-51
• /
• 2019

The purpose of this study was to analyze forest vegetation structure in Marugeum (the ridge line) area between Dakmokryeong and Daetjae in Baekdudaegan through vegetation classification, importance value, species diversity, and CCA using the data that were collected from 245 quadrates through Braun-Blanquet vegetation survey method from May to September in 2017. The results of the forest vegetation classification identified 8 vegetation units with Quercus mongolica community group at the highest level. Q. mongolica community group was classified into the Cornus controversa community, Buxus koreana community, Sasa borealis community, Abies nephrolepis community, and Q. mongolica typical community. C. controversa community was further classified into Quercus dentata group, Filipendula glaberrima group, Larix kaempferi group, and C. controversa typical group. The result of the important value analysis showed that Q. dentata had the highest importance value at 19.1% in vegetation unit 1 while Q. mongolica had the highest importance value at 22.7%, 38.3%, 25.6%, 41.3%, 27.9%, and 41.6% in vegetation unit 2, 4, 5, 6, 7, and 8, respectively, and L. kaempferi had the highest importance value at 27.6% in vegetation unit 3. As such, Q. mongolica species generally represented the communities of Marugeum (the ridge line) area of Dakmokryeong to Daetjae in Baekdudaegan. The results of species diversity showed that vegetation unit 1 and 2 were 3.305 and 3.236, respectively, which were relatively higher than other vegetation units. It was considered that this result was due to the influence of high emergence of present species. The results of the CCA analysis of the correlations between biotic environmental factors and vegetation types showed that vegetation unit 1 was mainly correlated with the megaphanerophyte ratio and vine plant ratio. In the correlations between abiotic environmental factors and vegetation types, vegetation unit 7 was significantly correlated with altitude. From the perspective of ecological management, vegetation unit 5 represented by B. koreana community was inhabited by a variety of plants due to the species composition and location environment due to the geological characteristics that are typical of limestone area. Vegetation unit 7 represented by A. nephrolepis community was typified as subalpine vegetation widely distributed by relict species and endemic species. We concluded that it is necessary to manage these vegetation units with an ecologically differentiated approach.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.74-91
• /
• 2014

The stone statues in the site of Mireuksaji Temple(Iksan, South Korea) were created after the stone pagoda was built in 639. They, transitional statues between animal sculptures and human shaped statues made from the late Goryeo dynasty until the early Joseon dynasty, were set up at the four corners of the stone pagoda by way of guardians. In the case of three statues, their surfaces were denudated and their iconographies have been indiscernible. However, the one in the southwest clearly shows its iconography. It is inferior in properties to the other three statues in the northwest, the northeast and the southeast respectively, but on the other hand its iconography has been well maintained. The reason is related to exposure to harmful environments; specifically, the retaining wall, built around the stone pagoda in the 17th century, had the southwest statue inside and could naturally worked as a buffer against harmful environments. As a result, for about 400 years there has been difference in weathering conditions between the three stone statues and the southwest statue, which brought denudation, the consequent indiscernibleness of iconography and biological invasion to the three statues, notwithstanding superior properties(northwest statue:$176kgf/cm^2$, northeast statue:$109kgf/cm^2$, southeast statue:$273kgf/cm^2$). In contrast, the southwest statue significantly shows its iconography with black contaminants and granule decomposition, despite inferior properties($133kgf/cm^2$). Defenseless exposure to external environment is not recommended for the stone statues, because it is hard to preserve the extant iconography. Herein lies the application of the data on microclimate around Mireuksaji Temple. As regards the weathering zone in which the stone statues are located, Conservation increases in acidity and frequency as years go by, Hereat, in the approach to the Conservation of stone statues, the first consideration needs to be morphological historicity rather than geographical location.