• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.26-31
• /
• 1978

The objective of the present study was to investigate the effect of nicotine-contaminated mulberry-leaf, which was grown in the vicinity of tobacco drying plant (TDP), on cocoon crop. Mulberry-leaf harvested from the field at Sericultural Experiment Station (SES), Suweon, Korea, was used as control, supposedly nicotine-free leaf. Leaf harvested from the field in the distances of 30-50m, 300-400m and 700-800m from TDP was fed during the whole larval stage of the silkworm at. SES. The effect of leaf in each treatment level on the quantitative characters of the silkworm was summarized as follows; 1. Larval duration from 4th instar on was significantly longer in the TDP-leaf treatments than for the control. 2. Duration of matured silkworm appearance became longer as the distance of the mulberry-field from TDP got shorter, because the larval duration and growth of the silkworm were not uniform in the TDP-leaf treatments. 3. Mortality rates during the late larval, cocoon spinning, and pupal stages were highest for the 30-50m leaf, especially mortality rates during the late larval and pupal stage were serious. 4. Pupation rate was lowest for the 30-50m leaf and those for the 300-400m and the 700-800m leaf were not significantly different from that of the control. 5. Nicotine damage to cocoon weight and cocoon shell weight was significant in each TDP-leaf level. Cocoon shell ratio was reduced at the same extent in each level, compared with the control. 6. The ratio among cocoon-classes was significantly different between treatments, compared with best-cocoon ratio of 87.1% for the control. Cocoons were not uniform for the 30-50m leaf, and those for the 300-400m and the 700-800m leaf were as almost uniform as those for the control. 7. Loss of fresh cocoon yield became greater as the distance of the mulberry-field from the TDP-got shorter. In conclusion, the critical distance of mulberry-field, which influences larval health, cocoon quality and yield, appeared to be 800m from the TDP. Such other factors as wind direction and topographic location may be involved in the critical distance. 8. From the present experiment, we could obtain only the effect of nicotine on the silkworm through digestive system, since the silkworm was raised at SES in Suweon. If the silkworm.. were raised in the vicinity of the TDP, poison effect of nicotine on the silkworm could beo expected through exoskeleton and tracheal system as well as through digestive system.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Journal of Environmental Impact Assessment
• /
• v.30 no.6
• /
• pp.339-354
• /
• 2021

The purpose of this study is to provide valuable information and data by analyzing the environmental status and potential forrenewable energy projects (or plans) based on environmental assessment (EA) data, so that more objective and scientific environmental assessments can be conducted. The study also suggests regional directions that could satisfy the goals of nature conservation and renewable energy. Based on the analysis of EA data that was conducted up until June 2019, the study analyzed the size, location and characteristics of both onshore wind power and onshore photovoltaic. The environmentally available potential by region was also derived by considering the main constraints and requirements related to the potential siting ofrenewable energy projects at the EA. Based on EA data, 63 out of 80 (79%) onshore wind power projects are shown to be located in mountainous areas. For onshore photovoltaic projects, a total of 7,363 projects were subjected to environmental assessment over the country. The environmentally potential area for onshore wind power, considering all the environmental regulatory factors, is 2,440 km². For onshore photovoltaic, the environmentally available area estimated as idle farmland is 2,877 km². The distribution and characteristics of the environmentally available potential of the region may be the most important factor that local governments should bear in mind in terms of promoting renewable energy development projects in the region. Based on the results of this study, even if we consider the national energy plan including the expected future increase, as well as environmental goals and socio-economic acceptance through an environmental assessment, the available resources forrenewable energy projects are not insufficient. It is possible to examine the adequacy of the target distribution rate of renewable energy sources by region taking into consideration the quantitative and scientific results such as the environmentally available potential data derived from this study.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1361-1371
• /
• 2021

Among smart city services, the crime and disaster prevention sector accounted for the highest 24% in 2018. The most important platform for providing real-time situation information is CCTV (Closed-Circuit Television). Therefore, it is essential to create the actual CCTV surveillance coverage to maximize the usability of CCTV. However, the amount of CCTV installed in Korea exceeds one million units, including those operated by the local government, and manual identification of CCTV coverage is a time-consuming and inefficient process. This study proposed a method to efficiently construct CCTV's actual surveillance coverage and reduce the time required for the decision-maker to manage the situation. For this purpose, first, the exterior orientation parameters and focal lengths of the pre-installed CCTV cameras, which are difficult to access, were calculated using the point cloud data of the MMS (Mobile Mapping System), and the FOV (Field of View) was calculated accordingly. Second, using the FOV result calculated in the first step, CCTV's actual surveillance coverage area was constructed with 1 m, 2 m, 3 m, 5 m, and 10 m grid interval considering the occluded regions caused by the buildings. As a result of applying our approach to 5 CCTV images located in Uljin-gun, Gyeongsnagbuk-do the average re-projection error was about 9.31 pixels. The coordinate difference between calculated CCTV and location obtained from MMS was about 1.688 m on average. When the grid length was 3 m, the surveillance coverage calculated through our research matched the actual surveillance obtained from visual inspection with a minimum of 70.21% to a maximum of 93.82%.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.903-916
• /
• 2021

An area's topography refers to the shape of the earth's surface, described by its elevation, slope, and aspect, among other features. The topographical conditions determine energy flowsthat move water and energy from higher to lower elevations, such as how much solar energy will be received and how much wind or rain will affect it. Another common factor, the topographic wetness index (TWI), is a calculation in digital elevation models of the tendency to accumulate water per slope and unit area, and is one of the most widely referenced hydrologic topographic factors, which helps explain the location of forest vegetation. Analyses of topographical factors can be calculated using a geographic information system (GIS) program based on digital elevation model (DEM) data. Recently, a large number of free open source software (FOSS) GIS programs are available and developed for researchers, industries, and governments. FOSS GIS programs provide opportunitiesfor flexible algorithms customized forspecific user needs. The majority of biodiversity in island areas exists at about 20% higher elevations than in land ecosystems, playing an important role in ecological processes and therefore of high ecological value. However, island areas are vulnerable to disturbances and damage, such as through climate change, environmental pollution, development, and human intervention, and lacks systematic investigation due to geographical limitations (e.g. remoteness; difficulty to access). More than 4,000 of Korea's islands are within a few hours of its coast, and 88% are uninhabited, with 52% of them forested. The forest ecosystems of islands have fewer encounters with human interaction than on land, and therefore most of the topographical conditions are formed naturally and affected more directly by weather conditions or the environment. Therefore, the analysis of forest topography in island areas can be done more precisely than on its land counterparts, and therefore has become a major focus of attention in Korea. This study is focused on calculating the performance of different topographical factors using FOSS GIS programs. The test area is the island forests in Korea's south and the DEM of the target area was processed with GRASS GIS and SAGA GIS. The final slopes and TWI maps were produced as comparisons of the differences between topographic factor calculations of each respective FOSS GIS program. Finally, the merits of each FOSS GIS program used to calculate the topographic factors is discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2021

Cyber Kill Chain is derived from Kill chain of traditional military terms. Kill chain means "a continuous and cyclical process from detection to destruction of military targets requiring destruction, or dividing it into several distinct actions." The kill chain has evolved the existing operational procedures to effectively deal with time-limited emergency targets that require immediate response due to changes in location and increased risk, such as nuclear weapons and missiles. It began with the military concept of incapacitating the attacker's intended purpose by preventing it from functioning at any one stage of the process of reaching it. Thus the basic concept of the cyber kill chain is that the attack performed by a cyber attacker consists of each stage, and the cyber attacker can achieve the attack goal only when each stage is successfully performed, and from a defense point of view, each stage is detailed. It is believed that if a response procedure is prepared and responded, the chain of attacks is broken, and the attack of the attacker can be neutralized or delayed. Also, from the point of view of an attack, if a specific response procedure is prepared at each stage, the chain of attacks can be successful and the target of the attack can be neutralized. The cyber command and control system is a system that is applied to both defense and attack, and should present defensive countermeasures and offensive countermeasures to neutralize the enemy's kill chain during defense, and each step-by-step procedure to neutralize the enemy when attacking. Therefore, thist paper proposed a cyber kill chain model from the perspective of defense and attack of the cyber command and control system, and also researched and presented the threat classification/analysis/prediction framework of the cyber command and control system from the defense aspect

• Korea Science and Art Forum
• /
• v.37 no.1
• /
• pp.87-97
• /
• 2019

The study began in recent years with the aim of grasping the nation's medical status following the fast-growing trend of international medical tourism and attracting foreign patients, among other things, Busan, which ranks second in attracting foreign patients after the nation's capital, Seoul, has been highly active in the past eight years, with foreign patients rising by about 426 percent, and Russian patients entering the sea. In addition, Gimhae and Changwon, the Busan-based Gyeongsangnam-do region, ranked first and second in number of foreign residents, and are inhabited by a variety of foreign workers. Medical institutions, such as hospitals, should be able to find directions within hospitals. It is also a space where information in various languages, including Korean, English, Chinese, or Russian, must be delivered in a single medium. Based on this research, the purpose of this research is to provide converged information that helps foreigners who are not familiar with Korean language easily understand the proposed recognition system when visiting hospitals. Therefore, this paper is applied to a multi-language survey of six medical institutions (A, B, C, D, E, F) at the university hospital in Busan, and 10 medical institutions (R, J) in Gimhae, South Gyeongsang Province with high foreign residents. Research results and contents are as follows. First, the results of analyzing the design of the sinusoidal system show that the font uses colorless Gothic fonts, arrows, and pictograms to introduce the design of a typical hospital sign system. Second, the results of the multi-lingual situation were found to have only two languages in the system, such as Korean and English, and to have four languages, including Korean, English, Chinese, and Russian, according to their geographical location. However, it was judged that most medical institutions currently have only two languages (Korean, English) that may cause some discomfort in terms of language for foreign patients in non-English speaking countries. Based on these findings, it is necessary to propose designs that are considered by Koreans as well as foreign users in the use of multilingual hospital sign systems.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.61-73
• /
• 2021

This study aimed to identify the landscape perception and landscape characteristics of users by utilizing SNS data generated by their experiences. Therefore, how to recognize the main places and scenery appearing on the island, and what are the characteristics of the main scenery were analyzed using online text data and photo data. Text data are text mining and network structural analysis, while photographic data are landscape identification models and color analysis. As a result of the study, First, as a result of frequency analysis of Bakji·Banwol-do topics, we were able to derive keywords for local landscapes such as 'Purple Bridge', 'Doori Village', and location, behavior, and landscape images by analyzing them simultaneously. Second, the network structure analysis showed that the connection between key and undrawn keywords could be more specifically analyzed, indicating that creating landscapes using colors is affecting regional activation. Third, after analyzing the landscape identification model, it was found that artificial elements would be excluded to create preferred landscapes using the main targets of "Purple Bridge" and "Doori Village", and that it would be effective to set a view point of the sea and sky. Fourth, Bakji·Banwol-do were the first islands to be created under the theme of color, and the colors used in artificial facilities were similar to the surrounding environment, and were harmonized with contrasting lighting and saturation values. This study used online data uploaded directly by visitors in the landscape field to identify users' perceptions and objects of the landscape. Furthermore, the use of both text and photographic data to identify landscape recognition and characteristics is significant in that they can specifically identify which landscape and resources they prefer and perceive. In addition, the use of quantitative big data analysis and qualitative landscape identification models in identifying visitors' perceptions of local landscapes will help them understand the landscape more specifically through discussions based on results.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1773-1784
• /
• 2021

In order to minimize damage to oil spill accidents in the ocean, it is essential to collect a spilled area as soon as possible. Thus satellite-based remote sensing is a powerful source to detect oil spills in the ocean. With the recent rapid increase in the number of available satellites, it has become possible to generate a status report of marine oil spills soon after the accident. In this study, the oil spill area was calculated using various satellite images for the Symphony oil spill accident that occurred off the coast of Qingdao Port, China, on April 27, 2021. In particular, improving the accuracy of oil spill area determination was applied using high-resolution commercial satellite images with a spatial resolution of 2m. Sentinel-1, Sentinel-2, LANDSAT-8, GEO-KOMPSAT-2B (GOCI-II) and Skysat satellite images were collected from April 27 to May 13, but five images were available considering the weather conditions. The spilled oil had spread northeastward, bound for coastal region of China. This trend was confirmed in the Skysat image and also similar to the movement prediction of oil particles from the accident location. From this result, the look-alike patch observed in the north area from the Sentinel-1A (2021.05.01) image was discriminated as a false alarm. Through the survey period, the spilled oil area tends to increase linearly after the accident. This study showed that high-resolution optical satellites can be used to calculate more accurately the distribution area of spilled oil and contribute to establishing efficient response strategies for oil spill accidents.