• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.561-572
• /
• 2010

This paper is a study about application of recently proposed Performance Based Mixture Design (PBMD) for design of high strength concrete (HSC) to obtain HSC mix proportion that satisfies required performances. The PBMD method which uses Satisfaction curve based on a Bayesian method is a performance oriented concrete mix proportion design procedure easily applicable to any condition and environment for a possible replacement to the current prescriptive design standards. Based on extensive experimental results obtained for various materials and performance parameters of HSC, the application feasibility of the developed PBMD procedure for HSC has been verified. Also, the proposed PBMD procedure has been used to perform application examples to obtain desired target performances of HSC with optimum concrete mixture proportions using locally available materials, local environmental conditions, and available concrete production technologies. The validity and precision of HSC mix proportion design obtained using the PBMD method is verified with the experimental and ACI presented results to check the feasibility for actual design usage.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.193-199
• /
• 2019

In this study, we have proposed a floating metal guard ring structure based on TCAD simulation in order to enhance the breakdown voltage characteristics of gallium oxide ($Ga_2O_3$) vertical high voltage switching Schottky barrier diode. Unlike conventional guard ring structures, the floating metal guard rings do not require an ion implantation process. The locally enhanced high electric field at the anode corner was successfully suppressed by the metal guard rings, resulting in breakdown voltage enhancement. The number of guard rings and their width and spacing were varied for structural optimization during which the current-voltage characteristics and internal electric field and potential distributions were carefully investigated. For an n-type drift layer with a doping concentration of $5{\times}10^{16}cm^{-3}$ and a thickness of $5{\mu}m$, the optimum guard ring structure had 5 guard rings with an individual ring width of $1.5{\mu}m$ and a spacing of $0.2{\mu}m$ between rings. The breakdown voltage was increased from 940 V to 2000 V without degradation of on-resistance by employing the optimum guard ring structure. The proposed floating metal guard ring structure can improve the device performance without requiring an additional fabrication step.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.460-472
• /
• 1995

This study was aimed to provide understanding on the eco-physiological response of barley tillers as affected by difference in seeding date. Yield and yield contribution rates of tillers were investigated with the data of field experiments in the former Wheat and Barley Research Institute of Suwon, Korea from September 1982 to July 1984. When barley was sowed 15 days earlier than or at the locally recommended sowing date (i.e. October 5), it produced more mainstem leaves than the that sowed 15 days later than the local recommendation. The effective tillers (i.e. ear-bearing tillers) were observed in concurrently occurring leaves up to 10/0 (abbreviation of the 10th mainstem leaf) from early and optimum sowed crops, while 9/0 from late sowed crops. Tillering followed the production rule of Gatayama(l952) which has the linear leaf appearance pattern. Early sowing produced more effective tillers, but the highest production of effective ears (i.e. ears heavier than 0.505g) was noticed in sowing at the recommended date. The tillers in the axil of first leaf in mainstem (abbreviated as 1) produced more effective ears than other mainstem tillers (i.e. primary tillers such as C, 2, 3 and 4). The tillers from the axil of first leaf, whether they were primary or secondary, always performed better in the production of effective tillers, grains per ear, grain weight, and grain yield per ear than those from the axil of coleoptile or prophyll. Other tillers from subsequent leaves were also inferior in production with the order of their appearance, thus making first leaf tillers as the best performer(e.g. 1 against C, 2, 3, 4 of primary tillers, 11 and 21 against 1P, 12, 13, 2P, 22 of secondary tillers). Even though the first leaf tiller from the first mainstem leaf(i.e. 11) emerged at a same time with the fourth mainstem leaf tiller(i.e. 4), it was always a better producer of ears and grains. The above observations of hierarchy among tillers were persistent irrespective of cropping conditions and treatments. Sowing at the recommended date produced more effective tillers and grains per ear than early or late sowing. In early and late sowings, more grains per effective ear were observed by early sowing, whereas more grains per ear were produced by late sowing. The order of performance in production of effective tillers and ears per plant was as follows: optimum > early > late sowings. In optimum sowing the mainstems were the highest in grain weight per ear, while the first leaf tillers were the ones in early sowing probably due to winter damage on mainstem ears. Yield contribution by the tillers was greater with the following order irrespective of sowing dates: mainstem, 1, 2, 3, C, 11, 12 and Cl. The contribution of CP, 2P, 21 and 31 varied with sowings.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.307-313
• /
• 1994

Purpose : Maxillary sinus cancers usually are locally advanced and involve the structures around sinus. It is uncommon for this cancer to spread to the regional lymph-nodes. For this reason, local control is of paramount important for cure. A policy of combined treatment is generally accepted as the most effective means of enhancing cure rartes. This paper reports our experience of a retrospective study of 31 Patients treated with radiation therapy alone and combination therapy of surgery and radiation. Materials and Methods: Between July 1974 and January 1992, 47 Patients with maxillary sinus cancers underwent either radiation therpay alone or combination therapy of surgery and radiation. Of these, only 31 patients were eligible for analysis. The distribution of clinical stage by the AJCC system was $26\%$(8/31) for T2 and $74\%$(23/31) for T3 and T4. Eight patients had palpable lymphadenopathy at diagnosis. Primary site was treated by Cobalt-60 radiation therapy using through a $45^{\circ}$ wedge-pair technique. Elective neck irradiation was not routinely given. Of these 8 patients, the six who had clinically involved nodes were treated with definite radiation therapy. The other two patients had received radical neck dissection. The twenty-two patients were treated with radiation alone and 9 patients were treated with combination radiation therapy, The RT alone patients with RT dose less than 60 Gy were 9 and those above 60 Gy were 13. Results : The overall 5 year survival rate was $23.8\%$. The 5 year survival rate by T-stage was $60.5\%$ and $7.9\%$ for T2 and T3,4, respectively. Statistical significance was found by T-stage(p<0.005). The 5 year survival rate by N-stage was $30\%$ for N (-) and $8.3\%$ for N(+), but statistically no significant difference was seen(p${\geq}$0.1). The 5 year survival rate for RT alone and combination RT was $22.5\%$ and $27.4\%$, respectively. The primary local control rate was $65\%$ (20/31). Conclusion : This study did not show significant difference in survival between RT alone and combination RT. There is still much controversy with regard to which treatment is optimum. Improved RT technique and development of multimodality treatment are essential to improve the local control and the survival rate in patients with advanced maxillary sinus cancer.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.25-31
• /
• 2011

Principal component analysis (PCA) is a well-known method for dimensionality reduction and feature extraction. Although PCA has been applied in many areas successfully, it is sensitive to outliers due to the use of sum-square-error. Several variants of PCA have been proposed to resolve the noise sensitivity and, among the variants, improved robust fuzzy PCA (RF-PCA2) demonstrated promising results. RF-PCA2, however, still can fall into a local optimum due to equal initial membership values for all data points. Another reason comes from the fact that RF-PCA2 is based on sum-square-error although fuzzy memberships are incorporated. In this paper, a variant of RF-PCA2 called RF-PCA3 is proposed. The proposed algorithm is based on the objective function of RF-PCA2. RF-PCA3 augments RF-PCA2 with the objective function of PCA and initial membership calculation using data distribution, which make RF-PCA3 to have more chance to converge on a better solution than that of RF-PCA2. RF-PCA3 outperforms RF-PCA2, which is demonstrated by experimental results.

• Journal of Animal Environmental Science
• /
• v.9 no.1
• /
• pp.9-18
• /
• 2003

Most of broiler houses in Korea have the trouble of environmental control such as suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens. Accordingly, it is very urgent to develop optimum designs of naturally and mechanically ventilated broiler houses for Korean climate. In this study, the internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were measured at a naturally ventilated broiler house. The data were collected during summer season including local weather data. It was found that the difference between measured and optimum air temperatures was $14.0^{\circ}C$ in maximum during the summer time. The daily maximum range of internal averaged air temperature was found $10.5^{\circ}C$ while the uniformity was $5.2^{\circ}C$ in maximum. The maximum, average, and minimum internal averaged relative humidity were 89.3%, 73.7%, and 49.2%, respectively while locally measured were 95.1% and 47.2%, respectively in maximum and minimum. Considering Temperature-humidity index, during summer season, over 97% of totally rearing period was shown that counter plan is needed for thermal stress while it was very dangerous situation for 22% of the rearing period. The ammonia gas and dust concentrations were seriously affected by the broilers activity, growth level, and relative humidity.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .