• Wind and Structures
• /
• 제32권3호
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.

• 한국정보전자통신기술학회논문지
• /
• 제2권3호
• /
• pp.3-8
• /
• 2009

화석연료 사용으로 인한 환경오염 및 에너지원가 상승이 큰 문제로 대두되고 있는 현재의 상황을 타개하기 위한 하나의 방안으로 신재생에너지에 대한 관심이 고조되고 있다. 특히 서해안에 위치하고 있는 새만금 지역은 광활한 면적과 서북서풍이라는 큰 장점을 가지고 있어 풍력발전의 적지로 예상되고 있다. 본 연구는 이러한 예상을 뒷받침해줄 수 있는 풍력자원을 조사한 것으로 군산 해상지역의 평균풍속은5~7m/s 정도이며, 도서지방을 연계하는 해상풍력발전 단지의 최적지로 손색이 없음을 밝혔다. 또한, 풍력자원의 출현밀도를 판별하는 Weibull의 분포한수를 이용하여 계산하고, 형상계수를 매개변수로 하여 풍속밀도계산을 한 결과, 군산지방의 풍속출현을 예상할 수 있었다. 또한 이를 원격감시를 통해 계측 제어함으로써 편리함과 동시에 안정성 면에서도 큰 성과를 이룰 수 있다.

• Wind and Structures
• /
• 제36권2호
• /
• pp.121-131
• /
• 2023

Aiming at the problem that fatigue characteristics of metal roof rely on local physical tests and lacks the cyclic load sequence matching with regional climate, this paper proposed a method of constructing the fatigue load spectrum based on integration of wind load model, measured data of long-span metal roof and climate statistical data. According to the turbulence characteristics of wind, the wind load model is established from the aspects of turbulence intensity, power spectral density and wind pressure coefficient. Considering the influence of roof configuration on wind pressure distribution, the parameters are modified through fusing the measured data with least squares method to approximate the actual wind pressure load of the roof system. Furthermore, with regards to the wind climate characteristics of building location, Weibull model is adopted to analyze the regional meteorological data to obtain the probability density distribution of wind velocity used for calculating wind load, so as to establish the cyclic wind load sequence with the attributes of regional climate and building configuration. Finally, taking a workshop's metal roof as an example, the wind load spectrum is constructed according to this method, and the fatigue simulation and residual life prediction are implemented based on the experimental data. The forecasting result is lightly higher than the design standards, consistent with general principles of its conservative safety design scale, which shows that the presented method is validated for the fatigue characteristics study and health assessment of metal roof.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권11호
• /
• pp.5489-5511
• /
• 2019

The performance of evolutionary algorithms can be seriously weakened when constraints limit the feasible region of the search space. In this paper we present a constrained multi-objective optimization algorithm based on adaptive ε-truncation (ε-T-CMOA) to further improve distribution and convergence of the obtained solutions. First of all, as a novel constraint handling technique, ε-truncation technique keeps an effective balance between feasible solutions and infeasible solutions by permitting some excellent infeasible solutions with good objective value and low constraint violation to take part in the evolution, so diversity is improved, and convergence is also coordinated. Next, an exponential variation is introduced after differential mutation and crossover to boost the local exploitation ability. At last, the improved crowding density method only selects some Pareto solutions and near solutions to join in calculation, thus it can evaluate the distribution more accurately. The comparative results with other state-of-the-art algorithms show that ε-T-CMOA is more diverse than the other algorithms and it gains better in terms of convergence in some extent.

• 한국환경과학회지
• /
• 제19권2호
• /
• pp.171-184
• /
• 2010

Accurate simulation of the meteorological field is very important to assess the wind resources. Some researchers showed that sea surface temperature (SST) plays a leading role on the local meterological simulation. New Generation Sea Surface Temperature (NGSST), Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA), and Real-Time Global Sea Surface Temperature (RTG SST) have different spatial distribution near the coast and OSTIA shows the best accuracy compared with buoy data in the southeastern coast of the Korean Peninsula. Those SST products are used to initialize the Weather Research and Forecasting (WRF) Model for November 13-23 2008. The simulation of OSTIA shows better result in comparison with NGSST and RTG SST. NGSST shows a large difference with OSTIA in horizontal and vertical wind fields during the weak synoptic condition, but wind power density shows a large difference during strong synoptic condition. RTG SST shows the similar patterns but smaller the magnitude and the extent.

• 천문학회보
• /
• 제37권1호
• /
• pp.83.1-83.1
• /
• 2012

We have developed an self-consistent PDR model to synthesize warm CO lines of Herschel/PACS observations more accurately. The PDR model solves the FUV continuum radiative transfer, gas energetics, and chemistry simultaneously. A local FUV radiation flux is calculated by using a Monte Carlo method taking anisotropic scattering into account. A new (r, ${\delta}$) coordinate system was used, where the r is the distance from the origin and the ${\delta}$ is z/$R^2$ in the cylindrical coordinate of (R,z). This is an adequate coordinate system to represent a power-law density of an envelope and a high spatial resolution near the outflow wall. The gas enegetics and chemistry are solved locally and considered $10^4K$ blackbody radiation field instead of the interstellar radiation filed. This newly developed model can be used to analyze quantitatively the effect of UV-heated outflow walls on the warm molecular lines in the embedded proto-stellar objects.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2586-2594
• /
• 1995

Two phase flow phenomena are observed in many industrial facilities and make much importance of optimum design for nuclear power plant and various heat exchangers. This experimental study has been investigated the classification of the flow pattern, the local void distribution and convective heat transfer in swirl and non-swirl two phase flow under the isothermal and nonisothermal conditions. The convective heat transfer coefficients in the single phase water flow were measured and compared with the calculated results from the Sieder-Tate correlation. These coefficients were used for comparisons with the two-phase heat transfer coefficients in the flow orientations. The experimental results indicate, that the void probe signal and probability density function of void distribution can used into classify the flow patterns, no significant difference in voidage distribution was observed between isothermal and non-isothermal condition in non-swirl flow, the values of two phase heat transfer coefficients increase when superficial air velocities increase, and the enhancement of the values is observed to be most pronounced at the highest superficial water velocity in non-swirl flow. Also two phase heat transfer coefficients in swirl flow are increased when the twist ratios are decreased.

• Wind and Structures
• /
• 제18권1호
• /
• pp.37-56
• /
• 2014

The evaluation of pressure fields acting on slender structures under wind loads is currently performed in experimental aerodynamic tests. For wind-sensitive structures, in fact, the knowledge of global and local wind actions is crucial for design purpose. This paper considers a particular slender structure under wind excitation, representative of most common high-rise buildings, whose experimental wind field on in-scale model was measured in the CRIACIV boundary-layer wind tunnel (University of Florence) for several angles of attack of the wind. It is shown that an efficient reduced model to represent structural response can be obtained by coupling the classical structural modal projection with the so called blowing modes projection, obtained by decomposing the covariance or power spectral density (PSD) wind tensors. In particular, the elaboration of experimental data shows that the first few blowing modes can effectively represent the wind-field when eigenvectors of the PSD tensor are used, while a significantly larger number of blowing modes is required when the covariance wind tensor is used to decompose the wind field.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권2호
• /
• pp.41-46
• /
• 2015

컴퓨터 사용 환경이 모바일 시장 및 소형 전자기기 시장 등으로 다양해짐에 따라 저전력 고성능 시스템에 대한 요구도 커지고 있다. 3차원 die-stacking 기술은 한정된 공간에서 DRAM의 집적도과 접근 속도를 높여 차세대 공정방식으로 많은 연구가 되고 있다. 이 논문에서는 3차원 구조의 DRAM 로직층에 재구성형 가속기를 구현하여 저전력 고성능 시스템을 구성하는 방법을 제안한다. 또한 재구성형 가속기의 지역 메모리로 캐시를 적용하고 활용하는 방법에 대해서 논의한다. DRAM의 로직층에 재구성형 가속기를 구현할 경우 위치적인 특성으로 데이터 전송 및 관리에 필요한 비용이 줄어들어 성능을 크게 향상시킬 수 있다. 제안된 시스템에서는 최대 24.8의 스피드업을 기록하였다.

• Wind and Structures
• /
• 제35권6호
• /
• pp.369-383
• /
• 2022

Wind tunnel experiment was carried out to study the cross-wind layer forces on a square cross-section building model using a synchronous multi-pressure sensing system. The stationarity of measured wind loadings are firstly examined, revealing the non-stationary feature of cross-wind forces. By converting the measured non-stationary wind forces into an energetically equivalent stationary process, the characteristics of local wind forces are studied, such as power spectrum density and spanwise coherence function. Mathematical models to describe properties of cross-wind forces at different layers are thus established. Then, a conditional simulation method, which is able to ex-tend pressure measurements starting from experimentally measured points, is proposed for the cross-wind loading. The method can reproduce the non-stationary cross-wind force by simulating a stationary process and the corresponding time varying amplitudes independently; in this way the non-stationary wind forces can finally be obtained by combining the two parts together. The feasibility and reliability of the proposed method is highlighted by an ex-ample of across wind loading simulation, based on the experimental results analyzed in the first part of the paper.