• 정보처리학회논문지C
• /
• 제16C권4호
• /
• pp.495-504
• /
• 2009

다수의 센서로 구성된 무선 센서 네트워크는 다양한 환경에서의 정보수집을 목적으로 하며 현재 다양한 분야에 응용 및 활용이 되고 있다. 센서 네트워크를 구성하는 각 센서 노드들은 한정된 전력의 배터리로 동작하므로 에너지 효율성 및 장시간의 네트워크 수명을 제공하는 것이 센서 네트워크의 중요한 연구 목표 중 하나이다. 본 논문에서는 무선 센서 네트워크의 에너지 효율성을 향상 시키고 데이터 신뢰성을 보장하기 위해 새로운 클러스터 기반의 지역 멀티홉 라우팅 프로토콜을 제안한다. 제안된 프로토콜은 클러스터 내의 멀티홉 형성으로 센서 노드들의 데이터 전송을 위한 에너지 소비를 최소화하며 지역 클러스터 헤드 순환 기법을 통해 기존 클러스터링 기법에서 빈번한 클러스터 구성으로 인한 에너지 낭비를 효율적으로 관리한다. 시뮬레이션을 통해 기존에 제안되었던 LEACH, LEACH-C, PEACH와 비교해 전체 노드의 에너지 소모를 균등하게 하여 에너지 효율성을 향상시키고 네트워크 수명을 연장하였음을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.105-110
• /
• 2018

The flow boiling heat transfer of water was experimentally investigated on plain and sintered microporous surfaces in a mini-channel. The effects of microporous coating on flow boiling heat transfer of subcooled water were investigated in a 300 mm long mini-channel with a cross section of $20{\times}10mm^2$. The test section has sufficiently long entrance length of 300 mm which provides a fully-developed flow before the channel inlet. The bottom side of the channel was heated by a copper block assembled with a high-density cartridge heater and other sides of the channel were insulated. The microporous surface was fabricated by sintering copper particles with the average particle size of $50{\mu}m$ on the top side of the copper block. Heat transfer measurement was conducted at the mass flux of $208kg/m^2s$ and the heat flux up to $500kW/m^2$. Microporous coated surface showed an earlier boiling incipience compared with plain surface regardless of the mass flux. Microporous coating were significantly attributed to local wall temperature and local heat transfer coefficient for flow boiling.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.79-88
• /
• 2010

Spent $UO_2$ nuclear fuel discharged from a nuclear power plant (NPP) contains fission products, U, Pu, and other actinides. Due to neutron capture by $^{238}U$ in the rim region and a temperature gradient between the center and the rim of a fuel pellet, a considerable increase in the concentration of fission products, Pu, and other actinides are expected in the pellet periphery of high burnup fuel. The characterization of the radial profiles of the various isotopic concentrations is our main concern. For an analysis, spent nuclear fuels originating from the Yeonggwang-2 pressurized water reactor (PWR) were chosen as the test specimens. In this work, the distributions of some actinide isotopes were measured from center to rim of the spent fuel specimens by a radiation shielded laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) system. Sampling was performed along the diameter of the specimen by reducing the sampling intervals from 500 ${\mu}m$ in the center to 100 ${\mu}m$ in the pellet periphery region. It was observed that the isotopic concentration ratios for minor actinides in the center of the specimen remain almost constant and increase near the pellet periphery due to the rim effect apart from the $^{236}U$ to $^{235}U$ ratio, which remains approximately constant. In addition, the distributions of local burnup were derived from the measured isotope ratios by applying the relationship between burnup and isotopic ratio for plutonium and minor actinides calculated by the ORIGEN2 code.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.408-417
• /
• 2022

Although traditionally perceived as being a visualization and asset management resource, the relatively rapid rate of improvement of computing power, coupled with the proliferation of cloud and edge computing and the IoT has seen the expanded functionality of modern Digital Twins (DTs). These technologies, when applied to buildings, are now providing users with the ability to analyse and predict their energy consumption, implement building controls and identify faults quickly and efficiently, while preserving acceptable comfort and well-being levels. Furthermore, when these building DTs are linked together to form a community DT, entirely new and novel energy management techniques, such as demand side management, demand response, flexibility and local energy markets can be unlocked and analysed in detail, creating circularity in the economy and making ordinary building occupants active participants in the energy market. Through the EU Horizon 2020 funded TwinERGY project, three different levels of DT (consumer - building - community) are being created to support the creation of local energy markets while optimising building performance for real-time occupant preferences and requirements for their building and community. The aim of this research work is to demonstrate the development of this new, interrelated, multi-level DT that can be used as a decision-making tool, helping to determine optimal scenarios simultaneously at consumer, building and community level, while enhancing and successfully supporting the community's management plan implementation.

• 터널과지하공간
• /
• 제24권6호
• /
• pp.464-472
• /
• 2014

환기제어 시설을 설치하지 않고 모든 공간을 개방한 형태의 대단면 주방식 채굴 작업장에 설치하는 국부선풍기의 운전에 따른 기류유동형태는 재순환을 포함하고 있어 복잡하고 정량화가 어렵고 환기효율 또한 매우 낮은 편이다. 본 논문에서는 국부선풍기의 운전에 따라 하류편의 기류 운동에너지 증가 및 정압강하 현상인 벤츄리(venturi) 효과로 인접갱도로부터 기류가 유입되어 기류 유동방향으로 환기량이 증가하는 현상을 선풍기 종류 및 설치방법 별로 CFD분석하였다. 분석대상 선풍기는 축류선풍기 1종류 및 프로펠러 선풍기 2종류이며 축류선풍기 중심점 설치 위치를 1.0, 1.5, 2.0m로 변경함에 따른 벤츄리 효과의 차이를 분석하였다. 연구결과는 공기질 개선을 통한 작업환경 관리를 위한 국부 환기의 경제성 및 효율성을 제고하는데 기여할 것으로 기대된다.

• 전자공학회논문지CI
• /
• 제46권3호
• /
• pp.116-122
• /
• 2009

센서 네트워크는 모든 센서노드들이 한정된 에너지를 가지고 사용되기 때문에 센서 네트워크의 생명주기를 연장하기 위해서 많은 연구가 진행되고 있다. 본 논문에서는 이동성을 갖는 싱크노드와 고정된 센서노드들을 가지는 이동 센서 네트워크에서 전체적인 생명주기를 연장하는 동적 지역 업데이트 기반의 라우팅 프로토콜(D-LURP)를 제안한다. D-LURP는 싱크노드가 브로드캐스팅 영역을 벗어나는 경우 LURP와 같이 새롭게 라우팅 구축과정을 수행하는 대신에 이동한 싱크노드를 중심으로 생성된 브로드캐스팅 영역과 이전의 영역을 포함하는 새로운 동적 업데이트 지역을 구축한다. 동적 브로드캐스팅 지역의 설정을 통해 기존의 전체 네트워크에 싱크노드의 위치정보를 브로드캐스팅하는 과정을 생략하도록 한다. 이러한 망 전체에 대한 브로드캐스팅의 생략을 통해서 본 논문에서 제안하는 싱크노드의 이동에 의한 동적 라우팅 구축은 기존의 LURP에 비하여 적은 에너지 소비를 필요로 한다. 시뮬레이션을 통해 기존의 프로토콜과 제안한 방법의 성능평가를 한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.320-325
• /
• 2004

Fracture behaviors and strength of pipes with local wall thinning are very important Jar the integrity of energy plants. In pipes of energy plants, sometimes, the local wall thinning may result from severe erosion-corrosion damage. Recently, the effects of local wall thinning on strength and fracture behaviors of piping system have been well studied. In this paper, the elasto-plastic analysis is performed by FE code ANSIS. We evaluated the failure mode, fracture strength and fracture behavior from FE analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.779-784
• /
• 2005

This paper presents the theory of similarity transformations applied to the momentum and energy equations for laminar, forced, external boundary layer flow over a horizontal flat plate which leads to a set of non-linear, ordinary differential equations of phase change material slurry(PCM Slurry). The momentum and energy equation set numerically to obtain the non-dimensional velocity and temperature profiles in a laminar boundary layer are solved. The heat transfer characteristics of PCM slurry was numerically investigated with similar method. It is clarified that the similar solution method of Newtonian fluid can be used reasonably this type of PCM slurry which has low concentration. The data of local wall heat flux and convective heat transfer coefficient of PCM slurry are higher than those of water more than 150$\~$200$\%$, approximately.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.446-454
• /
• 2008

Control devices for fire safety systems located in a engine room are to be arranged at a safe position which is easily accessible during a fire. To develop an interpretation for the safe position in engine rooms, calculation and experiments are carried out to determine a correlation between radiant heat and distance from fire in this paper. On the basis of results of this research, the control devices for a main engine are to be installed in the behind side of an obstruction to reduce radiant heat from the fire of the main engine. In case of other control devices, they are also to be provided in the same manner of control devices for the main engine or are to be placed with 5 meters far from fire hazards.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.245-245
• /
• 2010

This paper and the rear passivation experiment was local back surface field Nd:$YVO_4$ green laser and the experiment was used performed to screen printing. Laser power 100%, with a fixed frequency for 60kHz Current of 29A and 30A were tested in two conditions. The point contact distances of 0.2mm, 0.4mm, 0.6mm, 0.8mm and 29A and 30A current conditions, it was found that is suitable for 0.4mm.