Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

LOCAL BURNUP CHARACTERISTICS OF PWR SPENT NUCLEAR FUELS DISCHARGED FROM YEONGGWANG-2 NUCLEAR POWER PLANT

  • Published : 2010.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Spent $UO_2$ nuclear fuel discharged from a nuclear power plant (NPP) contains fission products, U, Pu, and other actinides. Due to neutron capture by $^{238}U$ in the rim region and a temperature gradient between the center and the rim of a fuel pellet, a considerable increase in the concentration of fission products, Pu, and other actinides are expected in the pellet periphery of high burnup fuel. The characterization of the radial profiles of the various isotopic concentrations is our main concern. For an analysis, spent nuclear fuels originating from the Yeonggwang-2 pressurized water reactor (PWR) were chosen as the test specimens. In this work, the distributions of some actinide isotopes were measured from center to rim of the spent fuel specimens by a radiation shielded laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) system. Sampling was performed along the diameter of the specimen by reducing the sampling intervals from 500 ${\mu}m$ in the center to 100 ${\mu}m$ in the pellet periphery region. It was observed that the isotopic concentration ratios for minor actinides in the center of the specimen remain almost constant and increase near the pellet periphery due to the rim effect apart from the $^{236}U$ to $^{235}U$ ratio, which remains approximately constant. In addition, the distributions of local burnup were derived from the measured isotope ratios by applying the relationship between burnup and isotopic ratio for plutonium and minor actinides calculated by the ORIGEN2 code.

Keywords

References

  1. W. J. Lee, Y. W. Kim and J. Chang, "Perspectives of Nuclear Heat and Hydrogen", Nuclear Engineering and Technology, Vol. 41(4), p.413 (2009) https://doi.org/10.5516/NET.2009.41.4.413
  2. Hj. Matzke, M. Coquerelle, K. Lassmann, I.L.F. Ray, C. Ronchi and C.T. Walker, "Oxide Fuel Transients", Journal of Nuclear Materials, Vol. 166, p. 165 (1989) https://doi.org/10.1016/0022-3115(89)90187-6
  3. Hj. Matzke, "On the Rim Effect in the High Bumup $UO_{2}$ LWR Fuels", Journal of Nuclear Materials, Vol. 189, p.141 (1992) https://doi.org/10.1016/0022-3115(92)90428-N
  4. J.I. Garcia Alonso, D. Thoby-Schultzzendorff, B. Giovanonne, J.-P. Glatz, G. Pagliosa, L. Koch, "Characterization of Spent Nuclear Fuel Dissolver Solutions and Dissolution Residues by Inductively Coupled Plasma Mass Spectrometry", Journal of Analytical Atomic Spectrometry, Vol. 9, p.1209 (1994) https://doi.org/10.1039/ja9940901209
  5. J.S. Becker, "Mass Spectrometry of Long-lived Radionuclides", Spectrochimica Acta, Part B, Vol. 58, p.1757 (2003) https://doi.org/10.1016/S0584-8547(03)00156-3
  6. J.S. Kim, S.H. Han, M.Y. Suh, J.S. Joe and T.Y. Eom, "Bumup Measurement of Irradiated Uranium Dioxide Fuel by Chemical Methods", Journal of Korean Nuclear Society, Vol. 21(4), p.277 (1989)
  7. E.R. Denoyer and K. J. Fredeen, "Laser Solid Sampling for Inductively Coupled Plasma Mass Spectrometry", Analytical Chemistry, Vol. 63, No.8, 445 (1991) https://doi.org/10.1021/ac00008a001
  8. C. Pickhardt, J.S. Becker and H.J. Dietze, "A New Strategy of Solution Calibration in Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Multielement Trace Analysis of Geological Samples", Fresenius Journal of Analytical Chemistry, Vol. 368, p.173 (2000) https://doi.org/10.1007/s002160000485
  9. Y-K. Ha, S.H. Hahn, H.G Kim, W.H. Kim and K.Y. Jee, "Shielded Laser Ablation ICP-MS System for the Characterization of High Bumup Fuel," Nuclear Engineering and Technology, Vol. 40(4), p.311 (2008). https://doi.org/10.5516/NET.2008.40.4.311
  10. J.S. Becker, "Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Laser Ablation ICP-MS for Isotope Analysis of Long-lived Radionuclides," International Journal of Mass Spectrometry, Vol. 242, p.183 (2005) https://doi.org/10.1016/j.ijms.2004.11.009
  11. "Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)," American Society for Testing and Materials Standard Method E321-96, 1 (1996)
  12. J.S. Kim, Y.S. Jeon, S.D. Park, B.C. Song, S.H. Han, and J.G. Kim, "Dissolution and Burnup Determination of Irradiated U-Zr Alloy Nuclear Fuel by Chemical Methods", Nuclear Engineering and Technology, Vol. 38(3), p.301 (2006)
  13. P, D, Regge and R. Boden, "Determination of Neodymium Isotopes as Bumup Indicator of Highly Irradiated (U,PU)02 LMFBR FUEL", Journal of Radioanalytical Chemistry, Vol. 35, p,173 (1977) https://doi.org/10.1007/BF02518224
  14. J,I. Garcia Alonso, J, Garcia Serrano, J.F. Babelot, J.-C. Closset, G. Nicolaou, and L. Koch, "Laser Ablation ICPMS on Spent Nuclear Fuel", Application of Plasma Source Mass Spectrometry II, RSC, special publication No.124, p. 193 (1993)
  15. H. Werner, "Build-up of Plutonium Isotopes in HTR Fuel Elements: A Comparison Between Computed Prediction and Chemical Analysis", Nuclear Engineering and Design, Vol. 170,p.147(1997) https://doi.org/10.1016/S0029-5493(97)00025-3
  16. Lester R. Morss, Norman M. Edelstein and Jean Fuger, The Chemistry of the Actinide and Transactinide Elements, 3rd ed. Springer (2006)
  17. C. Madic, J. Bourges, and G. Koehly, "Preparation of Nuclide and Sources of Actinides Elements", Nuclear Instruments and Methods in Physics Research, A236, p. 474 (1985)

Cited by

  1. Limiting spectroscopic interferences of 239Pu and 237Np in a UO2 matrix using LA-ICP-MS vol.310, pp.2, 2016, https://doi.org/10.1007/s10967-016-4854-x