• Wind and Structures
• /
• v.34 no.2
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• Composites Research
• /
• v.22 no.4
• /
• pp.20-26
• /
• 2009

In the current study, thermoforming and compression analysis were carried out for the woven composite egg-box panel with the non-orthogonal constitutive material model, which is proposed by Xue et al. The material model is implemented in commercial engineering software, LS-DYNA, with a user subroutine. Directional properties in non-orthogonal coordinates are determinedusing the deformation gradient tensor and the material modulus matrix in local coordinate is updated at eaeh corresponding time step. After the implemented non-orthogonal constitutive model is verified by the bias extension test, the egg-box panel simulations are performed. The egg-box panel simulations are divided into two categories: thermoforming (draping) and crushing. The finite element model for crushing analysiscan be obtained using the displacement result of thermoforming process.

• Biomolecules & Therapeutics
• /
• v.30 no.2
• /
• pp.162-169
• /
• 2022

We utilized Fas21, a resveratrol analog, to modulate the function of hepatic stellate cells (HSCs) and liver sinusoidal endothelial cells (LSECs) during the angiogenic phase of murine liver metastasis by B16 melanoma and 51b colorectal carcinoma. Preangiogenic micrometastases were treated with Fas21 (1 mg/kg/day) or vehicle during the development of intra-angiogenic tracts. Mice treated with Fas21 showed reduced liver tumor foci in both liver metastasis models. Micrometastases were classified immunohistochemically, as well as according to their position coordinates and connection to local microvasculature. The volume of liver occupied by sinusoidal-type foci, containing infiltrating angiogenic capillaries, decreased by ~50% in Fas21-treated mice compared to vehicle-treated ones in both tumor metastasis models. The volume of portal foci, containing peripheral neoangiogenesis within a discontinuous layer of myofibroblasts, was similar in all experimental groups in both tumor metastasis models, but displayed enhanced necrotic central areas devoid of angiogenesis following Fas21 treatment. As a result, sinusoidal tumors from mice treated with Fas21 showed a 50% reduction in desmin(+)/asma(+) HSCs and CD31(+) vessel density, and a 45% reduction in intrametastatic VEGF mRNA compared with sinusoidal tumors from vehicle-treated mice. Necrotic portal metastases increased 2-4-fold in treated mice. In vitro, Fas21 reduced VEGF secretion by HSCs and 51b cells dose-dependently. Additionally, HSCs migration in response to tumor soluble factors was dose-dependently diminished by Fas21, as was LSEC migration in response to HSCs and tumor soluble factors. Resveratrol analog Fas21 inhibits the proangiogenic response of HSCs and LSECs during the development of murine liver metastasis.

• Structural Monitoring and Maintenance
• /
• v.10 no.1
• /
• pp.25-42
• /
• 2023

Despite the significance of ports as critical economic infrastructure, the berth facilities usually deteriorate due to heavy loading, unloading, aging, environmental weather conditions, marine growths, and lack of efficient maintenance management. Marine berths require proactive maintenance management to limit deterioration and defects as no berth facility is maintenance-free. Thus, delay in carrying out maintenance work for the marine berths can be devastating to the operational process involving ship entry, loading, and unloading operations. The aim of this research is to coordinate both operations work, and maintenance works that take place inside the berth of a local industrial port in Saudi Arabia, by developing a novel framework that integrates both works without affecting the efficiency and functionality of the berth. The study focused on defining the operational process of the port and identifying the elements with direct and indirect effects. In addition to determining the priority for the entry of ships inside the berth, it also identified the factors involved in designing a framework that included maintenance work as a component of the monthly berth occupancy schedule. By applying a mathematical model, a framework was established, which includes all the important elements of the process. As a result of the mathematical method formulation process, a database was designed that organizes and coordinates the operations of all berths within the port. This creates time to carry out the required maintenance work monthly as well as ease of coordination with the contractors responsible for the implementation of those works.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.400-403
• /
• 2021

Algorithms for predicting the optimal route of vehicles are being actively sudied with the recent development of autonomous driving technology. Companies such as SK, Kakao, and Naver provide services that navigate the optimal route. They predicts the optimal path with information from the users in real time. However, they can predict the optimal route, but not optimal lane route. We proposes a system that navigates the optimal lane path with coordinates data from vehicles using Lidar sensor. The proposed method is a system that guides smooth lanes by acquiring time series coordinate data of a vehicle after performing the Lidar-based object detection method. we demonstrates the performance using actual acquired data from the experimental results.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.103-115
• /
• 2024

Trilateral adjustment can complement the problem of transforming cadastral maps into World Geodetic Coordinate system. First, it is possible to determine adjusted coordinate of common points that match each other over a wide area. Second, calculations that focus on specific points can be performed. Third, a solution that maintains the shape of the regional network can be obtained through constraints. Thus, the point coordinates can be determined appropriately for the survey system. In addition, heterogeneous survey results that span regions with different coordinate origins can be calculated on a single origin coordinate. This improves the efficiency of the workflow in tranforming cadastral maps into World Geodetic Coordinate System.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.232-243
• /
• 2018

The construction, development and maintenance of an economically, environmentally and socially sustainable campus involves the integration of measuring tools and technical information that invites and encourages the community to know the actual state to generate positive actions for reducing the negative impacts over the local environment. At the Universidad Nacional de Colombia - Campus $Bogot{\acute{a}}$, a public area with daily traffic of more than 25000 people, the Environmental Management Bureau has committed with the monitoring of the noise pollution and air quality, as support to the campaigns aiming to reduce the pollutant emissions associated to the student's activities and campus operation. The target of this study is based in the implementation of mobile air quality and sonometry monitoring equipment, the mapping of the actual air quality and noise pollution inside the university campus as a novel methodology for a sub-area inside a megacity. This results and mapping are proposed as planning tool for the institution administrative sections. A mobile Kunak$^{(R)}$ Air & OPC air monitoring station with the capability to measure particulate matter $PM_{10}$, $PM_{2.5}$, Ozone ($O_3$), Sulfur Oxide ($SO_2$), Carbon Monoxide (CO) and Nitrogen Oxide ($NO_2$) as well as Temperature, Relative Humidity and Latitude and Longitude coordinates for the data georeferenciation; and a sonometer Cirrus$^{(R)}$ 162B Class 2 were used to perform the measurements. The measurements took place in conditions of academic activity and without it, with the aim of identify the impacts generated by the campus operation. Using the free code geographical information software QGIS$^{(R)}$ 2.18, the maps of each variable measured were developed, and the impacts generated by the operation of the campus were identified qualitative and quantitively. For the measured variables, an increase of around 21% for the $L_{Aeq}$ noise level and around 80% to 90% for air pollution were detected during the operation period.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.67-75
• /
• 2017

The culture of Gugok (九曲) and Dongcheon (洞天), which tries to reach the ideological culmination in Confucianism, was widespread throughout the Joseon dynasty. This was an extension of the spirit of studying and honoring Zhu Xi (學朱子, 尊朱子); thereby, Confucian scholars in Joseon expressed the will to follow the teachings of Zhu Xi (朱子) and comforted themselves that they were in the course of attaining the truth. As a realization of this expression of will, scholars designated and operated various scenic sites as Gugoks, following the example of Zhu Xi's Mui Gugok (武夷九曲), and Dongcheons, as a representation of the utopia. These designations are widespread nationwide, with around sixty Gugok locations that have now been reported in academia. However, the actual number of Gugoks exceeds this number, and many of them are currently not identified concerning the exact locations. Therefore, the purpose of this study is to identify the locations of Gugoks and Dongcheons scattered around Seoul, Gyeonggi and Gangwon regions. For the coordinates of Gugoks and Dongcheons, this study referred to the literature, web search and the books published by local cultural institutes. Based on the collected information, the researchers conducted field trips to investigate whether the record exists as a real location and, if so, acquired their coordinates. This study also provides the tables of Gugok or Dongcheon that only exists in the imagination, existed before but now are lost, or are inaccessible. Eight locations in Seoul, Gyeonggi, and Gangwon regions are understood as Gugok. Among them, Gogun Gugok and Okgye Gugok have relatively clear locations and records. Byeokgye Gugok and Suhoe Gugok, on the other hand, has many locations and titles overlapped, and their established time and managers are unclear. As for Ui Gugok in Seoul, it is known to be set by Hong Yangho, but some parts of its locations are confirmed, others are in dispute, and many locations are damaged. Thirty-eight locations in Seoul, Gyeonggi, and Gangwon regions are understood as Dongcheon. There are sixteen Dongcheons in Seoul area. Among them, those including Dohwa Dongcheon, Yangsan Dongcheon, and Ssangnyu Dongcheon actually exist but are forbidden to be accessed. There are thirteen Dongcheons in Gyeonggi area. The exact location of Onsu Dongcheon cannot be confirmed because of the development; Gwirae Dongcheon has historical records, but the actual existence cannot be confirmed. There are nine Dongcheons in Gangwon area. The researcher judged that Hwaeum Dongcheon is the misspelled record of Hwaeumdong Jeongsaji (華陰洞精舍址), which is located at the upstream of Gogun Gugok.

• Journal of Intelligence and Information Systems
• /
• v.14 no.2
• /
• pp.83-102
• /
• 2008

Ubiquitous computing requires timely supply of contextual information in order to upgrade decision quality. In this sense, this study is aimed at proposing a multi-dynamic decision support system for highly ill-structured problems. Especially, it is very important for decision makers in the ubiquitous computing to coordinate conflicts among local goals and global goal harmoniously. The proposed Multi-Dynamic Decision Support System (MDDSS) is basically composed of both central structure and distributed structure, in which central structure supports multi objects decision making and distributed structure supports individual decision making. Its hybrid architecture consists of decision processor, multi-agent controller and intelligent knowledge management processor. Decision processor provides decision support using contexts which come from individual agents. Multi-agent controller coordinates tension among multi agents to resolve conflicts among them. Meanwhile, intelligent knowledge management processor manages knowledge to support decision making such as rules, knowledge, cases and so on. To prove the validity of the proposed MDDSS, we applied it to an u-fulfillment problem system in which many kinds of decision makers exist trying to satisfy their own objectives, and timely adjustment of action strategy is required. Therefore, the u-fulfillment problem is a highly ill-structured problem. We proved its effectiveness with the aid of multi-agent simulation comprising 60 customers and 10 vehicles under three experimental modes.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.118-127
• /
• 2010

Resistivity logging instruments are designed to measure the electrical resistivity of a formation, and this can be directly interpreted to provide a water-saturation profile. However, resistivity logs are sensitive to borehole and shoulder-bed effects, which often result in misinterpretation of the results. These effects are emphasised more in the presence of tool eccentricity. For precise interpretation of short- and long-normal logging measurements in the presence of tool eccentricity, we simulate and analyse eccentricity effects by combining the use of a Fourier series expansion in a new system of coordinates with a 2D goal-oriented high-order self-adaptive hp finite-element refinement strategy, where h denotes the element size and p the polynomial order of approximation within each element. The algorithm automatically performs local mesh refinement to construct an optimal grid for the problem under consideration. In addition, the proper combination of h and p refinements produces highly accurate simulations even in the presence of high electrical resistivity contrasts. Numerical results demonstrate that our algorithm provides highly accurate and reliable simulation results. Eccentricity effects are more noticeable when the borehole is large or resistive, or when the formation is highly conductive.