• 제목/요약/키워드: Local Connected Network

검색결과 127건 처리시간 0.025초

A Study of Mobile Edge Computing System Architecture for Connected Car Media Services on Highway

  • Lee, Sangyub;Lee, Jaekyu;Cho, Hyeonjoong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권12호
    • /
    • pp.5669-5684
    • /
    • 2018
  • The new mobile edge network architecture has been required for an increasing amount of traffic, quality requirements, advanced driver assistance system for autonomous driving and new cloud computing demands on highway. This article proposes a hierarchical cloud computing architecture to enhance performance by using adaptive data load distribution for buses that play the role of edge computing server. A vehicular dynamic cloud is based on wireless architecture including Wireless Local Area Network and Long Term Evolution Advanced communication is used for data transmission between moving buses and cars. The main advantages of the proposed architecture include both a reduction of data loading for top layer cloud server and effective data distribution on traffic jam highway where moving vehicles require video on demand (VOD) services from server. Through the description of real environment based on NS-2 network simulation, we conducted experiments to validate the proposed new architecture. Moreover, we show the feasibility and effectiveness for the connected car media service on highway.

Approach towards qualification of TCP/IP network components of PFBR

  • Aditya Gour;Tom Mathews;R.P. Behera
    • Nuclear Engineering and Technology
    • /
    • 제54권11호
    • /
    • pp.3975-3984
    • /
    • 2022
  • Distributed control system architecture is adopted for I&C systems of Prototype Fast Breeder Reactor, where the geographically distributed control systems are connected to centralized servers & display stations via switched Ethernet networks. TCP/IP communication plays a significant role in the successful operations of this architecture. The communication tasks at control nodes are taken care by TCP/IP offload modules; local area switched network is realized using layer-2/3 switches, which are finally connected to network interfaces of centralized servers & display stations. Safety, security, reliability, and fault tolerance of control systems used for safety-related applications of nuclear power plants is ensured by indigenous design and qualification as per guidelines laid down by regulatory authorities. In the case of commercially available components, appropriate suitability analysis is required for getting the operation clearances from regulatory authorities. This paper details the proposed approach for the suitability analysis of TCP/IP communication nodes, including control systems at the field, network switches, and servers/display stations. Development of test platform using commercially available tools and diagnostics software engineered for control nodes/display stations are described. Each TCP link behavior with impaired packets and multiple traffic loads is described, followed by benchmarking of the network switch's routing characteristics and security features.

인터넷을 이용한 자율운행로봇의 원격운용 (Internal Teleoperation of an Autonomous Mobile Robot)

  • 박태현;강근택;이원창
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.45-45
    • /
    • 2000
  • This paper proposes a remote control system that combines computer network and an autonomous mobile robot. We control remotely an autonomous mobile robot with vision via the internet to guide it under unknown environments in the real time. The main feature of this system is that local operators need a World Wide Web browser and a computer connected to the internet communication network and so they can command the robot in a remote location through our Home Page. The hardware architecture of this system consists of an autonomous mobile robot, workstation, and local computers. The software architecture of this system includes the server part for communication between user and robot and the client part for the user interface and a robot control system. The server and client parts are developed using Java language which is suitable to internet application and supports multi-platform. Furthermore, this system offers an image compression method using motion JPEG concept which reduces large time delay that occurs in network during image transmission.

  • PDF

On the Design of Optimal Response Time in Computer Terminal Networks

  • An Young-Ki
    • 한국국방경영분석학회지
    • /
    • 제2권1호
    • /
    • pp.185-194
    • /
    • 1976
  • A terminal response time analysis for a general class of terminals-to-computer subsystem is presented in this paper. On the point of the front view, it should be considered for R.O.K. Military Defense to set up the communication network in order to facilitate for the currency of the information and the data communication system. The model used to study is based on the advanced data communications system in which terminals are connected to Terminal Control Units(TCU) that are in turn connected to local Front-End Processor(FEP). The line control procedures used to interface a TCU and an FEP may be half-duplex Binary Synchronous Communication(BSC), half-duplex Synchronous Data Link Control(SDLC), or full-duplex SLDC. This paper will contribute to facilitate the initial phase of system design and configuration for the Military Defense Communication Network System in future.

  • PDF

Development of a Social Network Service Closely Coupled with Local Broadcasting Media

  • Kim, Hyeon Gyu
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권11호
    • /
    • pp.129-137
    • /
    • 2021
  • 현재 지역 방송사들은 수입원 확보의 어려움으로 인한 재정 부족과 경영 악화를 겪고 있다. 이는 해당 방송사들의 컨텐츠가 지역민들의 관심과 참여를 이끌어내지 못해 시청률이 지속적으로 감소하는데 기인한다. 이러한 문제를 해결하기 위해, 본 논문에서는 지역 방송과 밀결합된 소셜 네트워크 서비스를 제안하였다. 제안 방법에서는 작성글의 노출 범위를 지역으로 한정하여 기자들이 손쉽게 지역민들의 관심사를 찾을 수 있도록 구성하였다. 또한 지역민들의 작성글 중 기자가 취재 요청한 글들은 메인 화면의 상단에 배치함으로써, 지역민들의 의견이 방송과 직접적으로 연결될 수 있음을 한 눈에 알아볼 수 있도록 사용자 인터페이스(UI)를 구성하였다. 이는 지역민들의 참여를 활성화하고자 위함이다. 제안한 서비스는 울산 지역 방송사인 JCN과 함께 프로토타입 시스템의 형태로 구현되었으며, 본 논문에서는 해당 시스템의 UI 및 시스템 구조, 작성글의 우선순위 산정 알고리즘 등에 대해 소개한다.

Bolt looseness detection and localization using time reversal signal and neural network techniques

  • Duan, Yuanfeng;Sui, Xiaodong;Tang, Zhifeng;Yun, Chungbang
    • Smart Structures and Systems
    • /
    • 제30권4호
    • /
    • pp.397-410
    • /
    • 2022
  • It is essential to monitor the working conditions of bolt-connected joints, which are widely used in various kinds of steel structures. The looseness of bolts may directly affect the stability and safety of the entire structure. In this study, a guided wave-based method for bolt looseness detection and localization is presented for a joint structure with multiple bolts. SH waves generated and received by a small number (two pairs) of magnetostrictive transducers were used. The bolt looseness index was proposed based on the changes in the reconstructed responses excited by the time reversal signals of the measured unit impulse responses. The damage locations and local damage severities were estimated using the damage indices from several wave propagation paths. The back propagation neural network (BPNN) technique was employed to identify the local damages. Numerical and experimental studies were conducted on a lap joint with eight bolts. The results show that the total damage severity can be successfully detected under the effect of external force and measurement noise. The local damage severity can be estimated reasonably for the experimental data using the BPNN constructed by the training patterns generated from the finite element simulations.

요소 중심의 네트워크 접근법을 이용한 부정정 트러스 구조 해석 (Analysis of Indeterminate Truss Structures by Element-Focused Network Approach)

  • 한이철
    • 한국농공학회논문집
    • /
    • 제58권3호
    • /
    • pp.13-19
    • /
    • 2016
  • Element-focused network analysis method for truss structure is proposed. The propagation process of loads from external loads to connected other elements is similar to that of connections between nodes in accordance with attachment rule in a network. Here nodes indicate elements in a truss structure and edges represent propagated loads. Therefore, the flows of loads in a truss structure can be calculated using the network analysis method, and consequently the structure can also be analyzed. As a first step to analyze a truss structure as a network, we propose a local load transfer rule in accordance with the topology of elements, and then analyze the loads of the truss elements. Application of this method reveal that the internal loads and reactions caused by external loads can be accurately estimated. Consequently, truss structures can be considered as networks and network analysis method can be applied to further complex truss structures.

SNS(Facebook) 서비스 분석을 통한 지역광고 어플(App) 설계 및 구현 (Design and Implementation of local advertising application(App) through SNS service analysis)

  • 조영식
    • 디지털콘텐츠학회 논문지
    • /
    • 제16권2호
    • /
    • pp.325-334
    • /
    • 2015
  • 본 논문은 SNS(Social Network Service)와 연계된 지역광고 방법에 대하여 연구하고자 하였다. 특히, Facebook Page을 분석하여 지역광고에 활용 할 수 있는 방법을 찾고자 하였다. FaceBook Page 분석을 위해 2014년 7월부터 3개의 FaceBook Page(홍대앞, 강원대앞, 춘천뭐먹지?)를 직접 운영하였다. 각 Facebook Page들의 활동 결과에 대한 정량적인 결과 값들을 분석하였고, 또한, 각 Page의 네트워크 분석을 위해 NodeXL을 이용하였다. Facebook Page의 데이터를 분석한 결과, SNS와 연계된 지역광고에 대한 가능성을 확인 할 수 있었다. 향후 계속적인 연구와 실증을 위해, SNS와 연계된 실시간 지역광고 어플(App)을 설계하였고, Java 기반의 Android App과 php 기반의 Server 프로그램을 구현하였다. 향후, Facebook Page와 개발된 App의 운영된 데이터를 활용하여, 다양한 지역광고 방법에 대하여 연구가 가능할 것으로 기대한다.

국가지휘 무선통신망 구축 운영방안에 관한 연구 (A Study on the National Command Wireless Communication Network Construction and Operation)

  • 이창주
    • 한국재난정보학회 논문집
    • /
    • 제1권1호
    • /
    • pp.91-119
    • /
    • 2005
  • When the national disaster accident is occurred, it is difficult to maintain the mutual cooperation systems. In order to solve the problems, the construction of the national unified command wireless network is necessary. In this paper, the specified state of the characteristic frequency of the digital TRS wireless network constructed recently is investigated and analyzed. Through the analysis, the problems of the construction of the national unified command wireless network are grasped. To solve the problem, it is proposed that the digital TRS wireless network is connected with the satellite communication network, and connected with the existing wireless network, LMR. In the concretely it is proposed that the natural unified wireless network should be proceeded step by step. At first, for 2 years the existing networks of the Fire Fighting Agency, the Police, the Forest Service and so on must be utilized and prepared to link with TRS. The second, for 2 years it is carried forward a scheme to maintain the properties of the agencies concerned. Further, it must be prepared to connect with satellite network. At third, for 2 years all agencies concerned with the fire fighting and the disaster prevention must be unified, and the systems have to be promoted for the p1an of linkage of TRS network and the existing network. Next the agencies concerned have to be unified and the authority has to be intensified. When a disaster is occurred, the National Emergency Management Agency has to play a central role. In a local area it has to be given the Fire Fighting Agency an authority and a duty to get ready for each emergency situation.

  • PDF

A Study on the Effect of Distributed Generation of the Reconfiguration of Distribution Networks

  • Nguyen, Tung Linh;Trinh, Trong Chuong;Truong, Viet Anh
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권4호
    • /
    • pp.1435-1441
    • /
    • 2017
  • Distributed generation (DG) in the future will play an important role in the electricity supply systems, in wich can provide DG capacity from a few hundred kW to tens of MW. However, it is connected to the local power grid, DG will have certain influence on the power quality of the power grid. One of the most significant effects is that they will change the configuration of the local power grid as well as affecting the operation mode of the grid. This paper presents a method of finding the optimal open loop, analyzing and selecting the appropriate mode of operation to reduce power losses of power distribution networks that includes DG.