• 한국전통조경학회지
• /
• 제30권3호
• /
• pp.87-96
• /
• 2012

본 연구는 경남 거창군 가조면에 위치한 모현정과 수포대를 통해 장소애착과 장소착근의 문화현상이 어떠한 방법으로 구현되고 있는지를 실증적으로 확인하고자 하였다. 모현정과 수포대가 입지한 지명 '대학동(大學洞)'에서는 동방오현인 한훤당(寒暄堂) 김굉필(金宏弼)과 일두 정여창(鄭汝昌)의 도학(道學) 강론 터의 의미가 부여되어 있으며, 모현정을 품은 오도산(吾道山 1,134m) 또한 상기 선현이 베푸는 학문의 영향으로 산 이름조차 유교의 도(道)를 지칭한 '오도(吾道) 산(山)'으로 전환된 것에서 성리학적 발상이 깊이 내재되어 있음을 발견하게 된다. "현인을 사모하고 그리워"한다는 '모현(慕賢)'의 정명(亭名)에는 영남사림의 성리학적 조종(祖宗)이자 동방오현인 훤두 양선생(兩先生)과 선조 평촌(坪村) 최숙량(崔淑梁)을 숭모하고 추념하기 위한 장소애착의 정서가 수렴되어 있다. 더불어 오도재와 평촌을 추모하기 위한 기적비(紀蹟碑)와 한훤당을 상징하는 감나무의 식재 그리고 모현정 전면에 솟은 지동암은 실천을 통해 도학의 정신을 드러내고자 한 상기 3인의 일치된 의지를 상징하는 기념비적 표상으로, 후손 및 사림에 의한 장소애착의 반복적 표현이라는 점에 동의하게 된다. 다년간 강학(講學)하며 성리학을 향토 선비들에게 전하고, 자연을 노래한 명소 수포대 반석에 새긴 '훤두양선생장구지소'와 '평촌최공강학지소(坪村崔公講學地所)'라는 각자의 의미에서 집단 기억 속에 재생 전승되어 온 고유한 장소의미를 확인하게 된다. 이와 함께 모현정에 게판된 시문과 중수기 및 상량문의 장소언어 대부분이 모현정과 수포대에 대한 연원과 역사성을 환기시키는 내용으로 채워져 있음에서 '강학과 교유의 장'이자 장수지소(藏修之所)로서 각인된 공간 의미와 선현 숭모의 정신을 엿볼 수 있다. 이러한 장소전승은 장소에 대한 긍정적 감정 결속의 결과이며, 장소 정착과정을 통해 생긴 자연발생적 장소착근의 결과로 이루어진 산물이 모현정과 수포대라 할 수 있다. 이와 같은 결과를 종합할 때, 모현정과 수포대는 선현의 발자취를 추념하고 알리기 위한 장소애착의 공간이며, 모현정과 수포대 바위각자는 이곳에 누적된 장소의미를 함축적으로 보여주는 장소착근의 대표적 사례라 할만하다. 장소애착과 장소착근의 과정을 되짚어보는 것은 전통적 기념 공간 및 추모공원의 원형적 모습을 유추하는데 유효할 뿐만 아니라 현대적 의미의 장소 재현을 위해서도 매우 시사적이라 판단된다.

• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.311-322
• /
• 2022

본 연구에서는 분포형 광섬유 시트와 탄소섬유 시트를 콘크리트 표면에 부착하여 철근 콘크리트를 사용하는 구조물의 보강 효과 및 BOTDR 센서를 활용한 상태 평가를 4점 휨 실험을 통해 수행하였다. 부착 정도에 따른 보강 효과를 확인하기 위하여 탄소섬유 시트의 부착 형태를 다양하게 제작하였으며, BOTDR 센서의 활용성을 확인하기 위하여 실험체에 다수의 전기저항식 변형률 게이지를 부착하여 BOTDR 센서의 변형률과 비교하였다. 실험 결과를 살펴보면, 우선 CFRP시트 부착 정도에 따른 보강 효과에 분명한 차이가 나타나는데, 이는 부착 면적보다는 부착 형태에 더 영향을 받는 것으로 확인되었다. BOTDR 센서로부터 계측된 변형률로부터 하중 증가에 따른 철근 콘크리트 실험체의 구조적 거동을 시각화 할 수 있었으며, CFRP 보강 부위에서 하중이 집중되는 것을 알 수 있다. BOTDR 센서에서 계측된 변형률이 전기저항식 게이지로부터 계측된 변형률과 유사하게 계측되는 것을 알 수 있는데, 이를 통해 대형 토목 구조물의 전체적 거동을 분석하는데 BOTDR 센서가 효과적일 수 있음을 확인하였다. 다시 말해서, 국부적 변형률을 측정하는 전기식 변형률 게이지로 계측을 하면 계측 오차는 상당할 수 있는 반면에, 분포형으로 측정되는 BOTDR 센서는 이러한 문제를 줄일 수 있는 대안으로 판단된다. 마지막으로, CFRP 시트 탈락이 발생되는 부분에서 계측 BOTDR 센서 변형률이 높게 나타나는데 이를 활용하면 CFRP 시트의 국부적 손상 위치를 효율적으로 추적할 수 있을 것으로 판단된다.

• Archives of Reconstructive Microsurgery
• /
• 제7권2호
• /
• pp.165-174
• /
• 1998

Large soft tissue defect of the ankle and foot can present a difficult reconstructive problem to the surgeon. Local musculocutaneous, local fasciocutaneous or free flap is usually the first choice for providing soft tissue coverage. However, in certain situations, local flaps from the same leg and free flap may not be suitable. These include extensive soft tissue injury, where no suitable recipient vessels can be found, previous local fasciocutaneous flap or free flap failure. In such cases, we have utilized the septocutaneous(fasciocutaneous) branch flap of posterior tibial artery from the opposite healthy limb. We present 5 cases of cross leg flaps, which have been modernized with current understanding of vascular anatomy and current fixation technology. All cross leg flaps were based on the axial blood supply of the fasciocutanous branch of the posterior tibial artery. Cross-clamping with bowel clamp was used to create intermittent periods of ischemia. Adjacent lower extremity joints were exercised during the periods of attachment. The results have been quite encouraging. We conclude that the cross leg flap using septocutaneous flap and cast immobilization can be successfully and expeditiously used to cover defects of the ante and foot.

• Archives of Reconstructive Microsurgery
• /
• 제11권1호
• /
• pp.73-77
• /
• 2002

Medical application of leeches, by means of leech's blood suction, has advantages in not only directly removing blood congestion, but also preventing hindrance to venous drainage by inhibiting local thrombus formation and inducing continuous bleeding. Nevertheless, Aeromonas hydrophila infection secondary to such suction is most common and may develop into serious conditions from local inflammatory reaction to total necrosis of replanted parts and enterocolitis as well as sepsis. Once infected, it requires infection treatment, removal of necrotic tissues and reconstruction. Hence, duration and cost of treatment increase while functional recovery falls markedly. Accordingly, we present measures to reduce Aeromonas infections as follows: First, do not manipulate as much as possible while the leeches are sucking or moving. Second, the site which suction plates of the leeches are attached, should be selected away from the surgical wound site or open wound as much as possible. Third, contaminated or blood-wet gauze should be replaced often so that the skin of surgical areas would not swell. Furthermore, bleeding or oozing should be well-drained. Fourth, the areas other than the sites of leech attachment should be covered with sterilized gauzes in order to limit leech movement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.691-697
• /
• 2008

Heat exchangers are commonly used in practice in a wide range of application, from heat and air-conditioning system in a household, to chemical processing and power production in large plant. An Experimental study was conducted to investigated the fluid flow and heat transfer around four circular cylinders of in-line in a cross flow of air. The local and average heat transfer characteristics for tube banks are investigated in the present study. Heat transfer in a heat exchanger usually involves convection in each fluid and conduction through the wall separating the two fluid. The in-line pitch ratio was in the range $1.5{\leq}L/d{\leq}4.0$, where L is the center distance and d the cylinder diameter, and in the Reynolds number $8,000{\leq}Re{\leq}50,000$. The local and mean Nusselt numbers were estimated. Subsequently, the heat transfer characteristics of four circular cylinders are found to exhibit a strong dependency upon the separation point of their upstream cylinders.

• Journal of Periodontal and Implant Science
• /
• 제44권3호
• /
• pp.118-125
• /
• 2014

Purpose: The present split mouth study evaluates the effect of nonsurgical periodontal treatment on the gingival crevicular fluid (GCF) leptin level in chronic periodontitis. Methods: Ninety sites from 30 nonobese chronic periodontitis patients were selected and divided as follows: group I, 30 healthy sites receiving no treatment; group II, 30 periodontitis sites receiving scaling and root planing (SRP); and group III, 30 periodontitis sites receiving SRP with tetracycline local drug delivery. At baseline, after GCF sampling and clinical parameter recording, the assigned treatment was performed for the study groups. During recall visits, GCF sampling followed by clinical parameter recording was done for groups II and III. Results: Reductions in the probing depth and the clinical attachment level (CAL) were highly significant at different time intervals (except between day 0 and 45) in both groups II and III. Upon comparison, group III showed significant gain in CAL between day 0 and 15 and between day 0 and 45. After treatment, the reduction in the GCF leptin level was more significant in group III than in group II at day 15 but re-elevated almost to the pretreatment levels at day 45. Conclusions: Nonsurgical periodontal therapies were not effective in maintaining stable reduction in the GCF leptin level during the study period.

• 한국농공학회논문집
• /
• 제58권3호
• /
• pp.13-19
• /
• 2016

Element-focused network analysis method for truss structure is proposed. The propagation process of loads from external loads to connected other elements is similar to that of connections between nodes in accordance with attachment rule in a network. Here nodes indicate elements in a truss structure and edges represent propagated loads. Therefore, the flows of loads in a truss structure can be calculated using the network analysis method, and consequently the structure can also be analyzed. As a first step to analyze a truss structure as a network, we propose a local load transfer rule in accordance with the topology of elements, and then analyze the loads of the truss elements. Application of this method reveal that the internal loads and reactions caused by external loads can be accurately estimated. Consequently, truss structures can be considered as networks and network analysis method can be applied to further complex truss structures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권1호
• /
• pp.17-24
• /
• 2004

The purpose of this study was to evaluate the stability and efficacy of biologic membrane made of freeze-dried cartilage as a barrier to facilitate guided bone regeneration in experimental non-healing bone defects in the rat mandible. Nine adult Sprague-Dawley rats (400-500g) were used in experiment. 5.0mm in diameter were created on the mandibular angle area by means of slow-speed trephine drill. In microscopic examination, dynamic immature bone forming at 2 weeks and its calcification at 4 weeks were observed. The membrane made of lyophilized cartilage taken from human costal cartilage seems to be very effective for guided bone regeneration as a biologic membrane and the scaffold for attachment of cells or local drug delivery system of growth factor, which may meet the ideal requirement of a barrier membrane and graft materials.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.85-90
• /
• 2011

In this paper a design procedure via computer-aided molding simulation is presented to optimize the air-trap locations in a speaker encloser of mobile phone. The molding flow simulation reveals that the race-tracking phenomenon is the dominant feature in the current mold design. In obtaining an optimal filling pattern, the local modifications of the wall thickness such as in a flow leader attachment are considered as the primary control factor, and both the gate position and the filling time become the secondary control factor. In the one-at-a-time approach, the last location to be filled in the mold cavity could be successfully moved to the extremities of the part, allowing a natural ventilation of entrapped air through the mold parting plane.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.310-319
• /
• 1997

A finite element analysis of a trunnion pipe anchor is presented. The structure is analyzed for the case of internal pressure and moment loadings. The stress results are categorized into the average (membrane) stress, the linearly varying (bending) stress and the peak stress through the thickness. The resulting stresses are interpreted per Section III of the ASME Boiler and Pressure Vessel Code from which the Primary(B$_1$), Secondary(C$_1$) and Peak(K$_1$) stress indices for pressure, the Primary (B$_2$), Secondary(C$_2$) and Peak(K$_2$) stress indices for moment are developed. Based on the comparison between stress value by stress indices derived in this paper and stress value represented by the ASME Code Case N-391-1, the empirical equations for stress indices are effectively used in the piping stress analysis. Therefore, the use of empirical equations can simplify the procedure of evaluating the local stress in the piping design stage.