• Steel and Composite Structures
• /
• 제3권1호
• /
• pp.47-64
• /
• 2003

In a nonlinear finite element study on the mechanical behavior of simple beam connections to continuous concrete-filled steel tube columns, two principally different connection types were analyzed: one with plates attached to the outside of the tube wall, relying on shear transfer, and one with an extended plate inserted through the steel section to ensure bearing on the concrete core. The load was applied partly at the connection within the column length and partly at the top, representing the load from upper stories of a multistory building. The primary focus was on the increased demand for load transfer to ensure composite action when concrete with higher compressive strength is used. The results obtained from the analyses showed that the design bond strength derived from push tests is very conservative, mainly due to the high frictional shear resistance offered by pinching and contraction effects caused by connection rotation. However, with higher concrete strength the demand for load transfer increases, and is hard to fulfill for higher loads when connections are attached only to the steel section. Instead, the connection should penetrate into the concrete core to distribute load to the concrete by direct bearing.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.415-425
• /
• 2016

스틸스터드 내력벽 시스템은 국외에서 중고층형 모듈러 건축에 널리 사용되는 구조형식이다. 국내의 중고층형 모듈러 시스템에 스틸 스터드 벽체를 적용하기 위해서는 내진성능 확보가 필수적이다. 본 연구에서는 스트랩브레이스를 갖는 모듈러 건축 스틸스터드 내력벽 시스템의 횡력저항성능 및 유효강성을 제안하였다. 스트랩 브레이스와 수직외측스터드의 사양을 달리하는 2개의 실물 실험체에 대해 주기하중에 대한 실험을 실시하여 제안된 설계식을 검증하였다. 수직외측스터드의 휨거동을 고려할 수 있는 설계식을 통해 실험체의 공칭강도, 탄성강성, 항복변위 등을 예측하고 실험을 통해 검증하였다. 실험에 의한 최대강도는 예측식 대비 1.11~1.18배 수준으로 평가되었다. 박판의 스트랩 브레이스를 갖는 스트랩 스터드패널은 일반적으로 에너지소산능력이 매우 낮은 것으로 평가되나, 본 연구에서 제안한 수직외측스터드의 유효높이를 줄이고 브레이스의 각도를 낮춘 시스템의 경우 등가점성감쇠비가 최대 9.42% 수준으로 충분한 에너지소산능력이 확보될 수 있음을 확인하였다.

• 해양환경안전학회지
• /
• 제24권4호
• /
• pp.482-488
• /
• 2018

선박 축계는 프로펠러 하중의 영향으로 선미관 후부베어링의 국부하중 증가가 현저히 나타나 축계 선미관 베어링 손상의 위험이 증대된다. 이를 방지하기 위해 수행된 추진축계 정렬연구는 주로 준정적 상태(quasi-static condition)에서 축과 지지베어링간의 상대적 경사각을 감소시키는데 중점을 두어 진행되어 왔다. 그러나 보다 상세한 평가를 위해서는 동적상태를 추가로 고려하는 것이 필요하다. 4,700 DWT 선박을 대상으로 NCR로 운전중 급속으로 우현 전타할 때 추진축계가 받는 영향에 대해 연구하였다. 연구결과 선미 유동장 변화에 의해 프로펠러 편심추력이 과도 상태가 되어 프로펠러에 불평형 진동이 유발되는 것을 확인하였다. 우현 전타시의 프로펠러 편심추력은 NCR 조건대비 축을 선미관 베어링으로부터 들어 올리는 힘으로 작용하여 선미관 베어링 하중완화에 기여하고 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.617-631
• /
• 2022

To study the eccentric compressive performance of the basalt-fiber reinforced recycled aggregate concrete (BFRRAC)-filled circular steel tubular stub column, 8 specimens with different replacement ratios of recycled coarse aggregate (RCA), basalt fiber (BF) dosage, strength grade of recycled aggregate concrete (RAC) and eccentricity were tested under eccentric static loading. The failure mode of the specimens was observed, and the relationship curves during the entire loading process were obtained. Further, the load-lateral displacement curve was simulated and verified. The influence of the different parameters on the peak bearing capacity of the specimens was analyzed, and the finite element analysis model was established under eccentric compression. Further, the design-calculation method of the eccentric bearing capacity for the specimens was suggested. It was observed that the strength failure is the ultimate point during the eccentric compression of the BFRRAC-filled circular steel tubular stub column. The shape of the load-lateral deflection curves of all specimens was similar. After the peak load was reached, the lateral deflection in the column was rapidly increased. The peak bearing capacity decreased on enhancing the replacement ratio or eccentric distance, while the core RAC strength exhibited the opposite behavior. The ultimate bearing capacity of the BFRRAC-filled circular steel tubular stub column under eccentric compression calculated based on the limit analysis theory was in good agreement with the experimental values. Further, the finite element model of the eccentric compression of the BFRRAC-filled circular steel tubular stub column could effectively analyze the eccentric mechanical properties.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.675-684
• /
• 2017

In this paper, a hybrid seismic response control (HSRC) system was developed to control bridge behavior caused by the seismic load. It was aimed at optimum vibration control, composed of a rubber bearing of passive type and MR-damper of semi-active type. Its mathematical modeling was driven and applied to a bridge model so as to prove its validity. The bridge model was built for the experiment, a two-span bridge of 8.3 meters in length with the HSRC system put up on it. Then, inflicting the EI Centro seismic load on it, shaking table tests were carried out to confirm the system's validity. The experiments were conducted under the basic structure state (without an MR-damper applied) first, and then under the state with an MR-damper applied. It was also done under the basic structure state with a reinforced rubber bearing applied, then the passive on/off state of the HSRC system, and finally the semi-active state where the control algorithm was applied to the system. From the experiments, it was observed that pounding rather increased when the MR-damper alone was applied, and also that the application of the HSRC system effectively prevented it from occurring. That is, the experiments showed that the system successfully mitigated structural behavior by 70% against the basic structure state, and, further, when control algorithm is applied for the operation of the MR-damper, relative displacement was found to be effectively mitigated by 80%. As a result, the HSRC system was proven to be effective in mitigating responses of the two-span bridge under seismic load.

• Composites Research
• /
• 제34권2호
• /
• pp.101-107
• /
• 2021

복합재료를 활용하여 설계되는 구조물은 각 부품들의 조립, 체결부를 갖게 된다. 이러한 연결 또는 조인트는 구조에서 잠재적으로 취약 부분이 될 수 있다. 복합재료 볼트 조인트의 파손모드는 구조 안전성을 위해 베어링 파손모드로 설계된다. 베어링 파손모드로 파괴되는 복합재료 볼트 조인트의 하중-변위 관계는 초기 파손 발생 후 비선형 거동을 보이며, 점진적인 파손을 보인다. 이러한 비선형적이고 점진적인 복합재료 볼트 조인트의 파손거동을 정확히 예측하기 위해 본 연구에서는 기존의 파손해석 모델에서 전단 손상변수 계산 과정에 수정을 수행하였다. 수정된 파손해석 모델을 이용하여 복합재료 볼트 조인트의 베어링 응력-베어링 변형률 결과를 예측하였으며, 기존 수정되지 않은 해석모델과 비교를 통해 수정된 모델의 유효성을 입증하였다.

• Steel and Composite Structures
• /
• 제14권4호
• /
• pp.313-333
• /
• 2013

The web-encased steel-concrete composite (WESCC) beam is a new developed steel-concrete composite beam. Experiments of six simply supported WESCC beam specimens were conducted. The effects of the shear-span ratio and steel section type were all investigated on the static behaviors such as failure modes, failure mechanism and bearing capacity. The experimental results denoted that all specimens failed in bending mode and the degree of combination between the bottom armor plate of steel shape and concrete were very well without any evident slippage, which demonstrated that the function of bottom armor plate and web were fully exerted in the WESCC beams. It could be concluded the WESCC beams have high stiffness, high load carrying capacity and advanced ductility. The design methods are proposed which mainly consist the bearing capacity calculation of bending and flexural rigidity. The calculation results of the bearing capacity and deflection which take the shear deflection into account are in agreement with the experimental results. The design methods are useful for design and application of the innovative composite beams.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.513-528
• /
• 2020

This paper presents the results of an experimental study on the residual behavior of reinforced recycled aggregate concrete (RRAC) beam-columns after exposure to elevated temperatures. Two parameters were considered in this test: (a) recycled coarse aggregate (RCA) replacement percentages (i.e. 0, 30, 50, 70 and 100%); (b) high temperatures (i.e. 20, 200, 400, 600, and 800℃). A total of 25 RRAC short columns and 32 RRAC beams were conducted and subjected to different high temperatures for 1 h. After cooling down to ambient temperature, the following basic physical and mechanical properties were then tested and discussed: (a) surface change and mass loss ratio; (b) strength of recycled aggregate concrete (RAC) and steel subjected to elevated temperatures; (c) bearing capacity of beam-columns; (d) load-deformation curve. According to the test results, the law of performance degradation of RRAC beam-columns after exposure to high temperatures is analyzed. Finally, introducing the influence coefficient of RCA replacement percentage and high temperatures, respectively, to correct the calculation formulas of bearing capacity of beam-columns in Chinese Standard, and then the residual bearing capacity of RRAC beam-columns subjected elevated temperatures is calculated according to the modified formulas, the calculated results are in good agreement with the experimental results.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.100-104
• /
• 2013

Bearing occurs by the rotations of members induced from horizontal or vertical load at traditional wooden joint in frame. The bearing between wooden members is not occurring at the whole surface of joint, but occurring only at the particular bearing area. In this study, partial bearing according to the different grain direction was evaluated. The partial compressive strength showed 3 times higher than pure compressive strength perpendicular to grain, 1.5 times higher than parallel to grain and 3.3 times higher than both of them. It is expected that this result can be very importantly applied when evaluating and analyzing the actual behavior of traditional wooden mortise and tenon joint.

• 대한토목학회논문집
• /
• 제28권4C호
• /
• pp.197-203
• /
• 2008

풍화된 암반에 근입된 말뚝의 선단지지거동은 신선암의 강도보다는 절리를 포함한 암반 상태에 의존한다. 본 연구에서는 암반상태가 말뚝의 선단지지력에 미치는 영향을 알아보기 위해 먼저 총 4부지의 암반에 근입된 13본의 현장타설콘크리트 말뚝에 대한 재하시험, 그리고 재하시험 부지의 지반조사 자료를 포함하는 데이터베이스를 구축하고, 말뚝선단부의 거동과 암반물성치의 상관관계를 분석하였다. 선단지반반력계수와 암반물성치의 상관관계 분석 결과 암석의 일축압축강도와 지반반력계수 사이에는 일관된 상관관계를 찾을 수 없었으나, 암반의 상태를 나타내는 물성치인 $E_m$, $E_{ur}$, RMR, 그리고 RQD 등과 지반반력계수의 상관계수는 대부분 0.7 이상으로 매우 뛰어난 상관성을 보였다. 또한, 기존의 방법으로 추정한 선단지지력과 실측 선단지지력의 비교를 통해 기존 방법의 적용성을 검증하였다.