DOI QR코드

DOI QR Code

Composite action in connection regions of concrete-filled steel tube columns

  • Johansson, Mathias (Department of Structural Engineering, Concrete Structures, Chalmers University of Technology)
  • 투고 : 2002.10.11
  • 심사 : 2003.03.04
  • 발행 : 2003.02.25

초록

In a nonlinear finite element study on the mechanical behavior of simple beam connections to continuous concrete-filled steel tube columns, two principally different connection types were analyzed: one with plates attached to the outside of the tube wall, relying on shear transfer, and one with an extended plate inserted through the steel section to ensure bearing on the concrete core. The load was applied partly at the connection within the column length and partly at the top, representing the load from upper stories of a multistory building. The primary focus was on the increased demand for load transfer to ensure composite action when concrete with higher compressive strength is used. The results obtained from the analyses showed that the design bond strength derived from push tests is very conservative, mainly due to the high frictional shear resistance offered by pinching and contraction effects caused by connection rotation. However, with higher concrete strength the demand for load transfer increases, and is hard to fulfill for higher loads when connections are attached only to the steel section. Instead, the connection should penetrate into the concrete core to distribute load to the concrete by direct bearing.

키워드

참고문헌

  1. Baltay, P. and Gjelsvik, A. (1990), "Coefficient of friction for steel on concrete at high normal stress", Journal of Materials in Civil Engineering, 2(1), Feb., 46-49. https://doi.org/10.1061/(ASCE)0899-1561(1990)2:1(46)
  2. Bergman, R. (1994), "Load introduction in composite columns filled with high strength concrete", Proceedings of the 6th International Symposium on Tubular Structures, Monash University, Melbourne, Australia, 373-380.
  3. Bergman, R., Matsui, C., Meinsma, C. and Dutta, D. (1995), Design Guide for Concrete Filled Hollow Section Columns under Static and Seismic Loading, CIDECT series "Construction with hollow steel sections", Verlag TUV Rheinland, Koln, Germany.
  4. CEB Bulletin d'Information 228 (1995), High Performance Concrete, Recommended Extensions to the Model Code 90, Research Needs. Lausanne, Switzerland, July.
  5. Dunberry, E., Leblanc, D. and Redwood, R. G. (1987), "Cross-section strength of concrete-filled HSS columns at simple beam connections", Canadian Journal of Civil Engineering, 14, 408-417. https://doi.org/10.1139/l87-059
  6. European Prestandard, Eurocode 4 (1992), Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings. Ref. No.1994-1-1:1992, October.
  7. Hajjar, J. F., Schiller, P. H. and Molodan, A. (1998), "A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slip", Engineering Structures, 20(8), Aug., 663-676. https://doi.org/10.1016/S0141-0296(97)00107-7
  8. HKS (2001), ABAQUS/Standard User's Manual, version 6.2, Hibbit, Karlsson & Sorensen, Inc., Pawtucket, USA.
  9. Johansson, M. and Gylltoft, K. (2001), "Structural behavior of slender circular steel-concrete composite columns under various means of load application", Steel and Composite Structures, 1(4), Dec., Techno-Press, 393-410. https://doi.org/10.12989/scs.2001.1.4.393
  10. Kennedy, S. J. (1984), "End connection effects on the strength of concrete filled HSS beam columns", M.Sc. Thesis, Department of Civil Engineering, Edmonton, Alberta, Canada.
  11. Kilpatrick, A. E. and Rangan, B. V. (1999), "Influence of interfacial shear transfer on behavior of concrete-filled steel tubular columns", ACI Structural Journal, July-Aug., Title no. 96-S72, 642-648.
  12. Roeder, C. W., Cameron, B. and Brown, C. B. (1999), "Composite action in concrete filled tubes", Journal of Structural Engineering, 125(5), May, 477-484. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(477)
  13. Roik, K. and Bode, B. (1980), "Composite action in composite columns", Sfintesco Festschrift, Paris, France, 287-302.
  14. Roik, K., Breit, M. and Schwalbenhofer, K. (1984), Untersuchung der Verbundwirkung zwischen Stahlprofil und Beton bei Stutzenkonstruktionen, Studiengesellschaft fur Anwendungstechnik von Eisen und Stahl e.V., Dusseldorf, Germany.
  15. Roik, K. and Schwalbenhofer, K. (1988), Experimentelle Untersuchung zum plastichen Verhalten von Verbundstutzen, Bericht zu P125, Dusseldorf, Germany.
  16. Shakir-Khalil, H. (1991), "Bond strength in hollow concrete-filled steel hollow sections", Proceedings, International Conference on Steel and Aluminium Structures, Composite Steel Structures, Singapore, 157-168.
  17. Shakir-Khalil, H. (1992), "Full-scale tests on composite connections", Composite Construction in Steel and Concrete II, Proceedings of the Engineering Foundation Conference, Potosi, Missouri, June 14-19, ASCE, New York, USA, 539-554.
  18. Shakir-Khalil, H. (1993a), "Pushout strength of concrete-filled steel hollow sections", The Structural Engineer, 71(13), 230-233 and 243.
  19. Shakir-Khalil, H. (1993b), "Resistance of concrete-filled steel hollow tubes to pushout forces", The Structural Engineer, 71(13), 234-243.
  20. Shakir-Khalil, H. (1994), "Beam connections to concrete-filled tubes", Proceedings of the 6th International Symposium on Tubular Structures, Monash University, Melbourne, Australia, 357-364.
  21. Virdi, K.S. and Dowling, P.J. (1980), "Bond strength in concrete filled steel tubes", IABSE Proceedings P-33/80, Zurich, Switzerland, August, 125-139.

피인용 문헌

  1. Axial compressive behaviour of circular CFFT: Experimental database and design-oriented model vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.921
  2. Nonlinear finite element analysis of CFT-to-bracing connections subjected to axial compressive forces vol.33, pp.5, 2011, https://doi.org/10.1016/j.engstruct.2011.01.018
  3. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  4. Numerical analyses of the force transfer in concrete-filled steel tube columns vol.35, pp.2, 2003, https://doi.org/10.12989/sem.2010.35.2.241
  5. Shear transfer mechanism in connections involving concrete filled steel columns under shear forces vol.28, pp.4, 2003, https://doi.org/10.12989/scs.2018.28.4.449
  6. New methodology to analyze the steel-concrete bond in CFST filled with lightweight and conventional concrete vol.54, pp.1, 2021, https://doi.org/10.1617/s11527-020-01579-5
  7. Mechanism of load introduction and transfer within steel-encased CFST members with shear connections vol.242, pp.None, 2003, https://doi.org/10.1016/j.engstruct.2021.112576