Browse > Article
http://dx.doi.org/10.7234/composres.2021.34.2.101

Prediction of Failure Behavior for Carbon Fiber Reinforced Composite Bolted Joints using Progressive Failure Analysis  

Yoon, Donghyun (Department of Mechanical Engineering, Chungnam National University)
Kim, Sangdeok (Department of Mechanical Engineering, Chungnam National University)
Kim, Jaehoon (Department of Mechanical Engineering, Chungnam National University)
Doh, Youngdae (HANKUK FIBER GROUP)
Publication Information
Composites Research / v.34, no.2, 2021 , pp. 101-107 More about this Journal
Abstract
Composite structures have components and joints. Theses connections or joints can be potentially weak points in the structure. The failure mode of the composite bolted joint is designed as a bearing failure mode for structural safety. The load-displacement relation exhibits bearing failure mode shows a nonlinear behavior after the initial failure and progressive failure behavior. In order to accurately predict the failure behavior of composite bolted joints, this study modified the shear damage variable calculation process in the existing progressive failure analysis model. The results of the bearing stress-bearing strain of the composite bolted joint were predicted using the modified progressive failure analysis model, and the modified model was verified through comparison with the previous progressive analysis model.
Keywords
Composite material; Composite bolted joint; Progressive failure analysis; Nonlinear shear behavior;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Lapczyk, I., and Hurtado, J.A., "Progressive Damage Modeling in Fiber-reinforced Materials," Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 11, 2007, pp. 2333-2341.   DOI
2 Riccio, A., Di Costanzo, C., Di Gennaro, P., Sellitto, A., and Raimondo, A., "Intra-laminar Progressive Failure Analysis of Composite Laminates with a Large Notch Damage," Engineering Failure Analysis, Vol. 73, 2017, pp. 97-112.   DOI
3 Matzenmiller, A., Lubliner, J., and Taylor, R.L., "A Constitutive Model for Anisotropic Damage in Fiber-composites," Mechanics of Materials, Vol. 20, No. 2, 1995, pp. 125-152.   DOI
4 Linde, P., and de Boer, H., "Modelling of Inter-rivet Buckling of Hybrid Composites," Composite Structures, Vol. 73, No. 2, 2006, pp. 221-228.   DOI
5 Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 47, No. 2, 1980, pp. 329-334.   DOI
6 Laffan, M.J., Pinho, S.T., Robinson, P., and Iannucci, L., "Measurement of the in situ Ply Fracture Toughness Associated with Mode I Fibre Tensile Failure in FRP.Part II: Size and Lay-up Effects", Composites Science and Technology, Vol. 70, No. 4, 2010, pp. 614-621.   DOI
7 Cann, M.T., Adams, D.O., and Schneider, C.L., "Characterization of Fiber Volume Fraction Gradients in Composite Laminates," Journal of Composite Materials, Vol. 42, No. 5, 2008, pp. 447-466.   DOI
8 Kang, M.S., Jeon, M.H., Kim, I.G., Kim, M.G., Go, E.S., and Lee, S.W., "The Effect of the Fiber Volume Fraction Non-uniformity and Resin Rich Layer on the Rib Stiffness Behavior of Composite Lattice Structures," Composites Research, Vol. 31, No. 4, 2018, pp. 161-170.
9 Shigley, J.E., Shigley's Mechanical Engineering Design, Vol. 8., McGraw-Hill, New York, NY, USA, 2008.
10 Herrington, P.D., and Sabbaghian, M., "Factors Affecting the Friction Coefficients between Metallic Washers and Composite Surfaces," Composites, Vol. 22, No. 6, 1991, pp. 418-424.   DOI
11 ASTM D3410/D3410M-16, Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading, ASTM International, 2016, pp. 1-16.
12 Tikarrouchine, E., Chatzigeorgiou, G., Praud, F., Piotrowski, B., Chemisky, Y., and Meraghni, F., "Three-dimensional FE2 Method for the Simulation of Non-linear, Rate-dependent Response of Composite Structures," Composite Structures, Vol. 193, 2018, pp. 165-179.   DOI
13 Nikbakht, M., Toudeshky, H.H., and Mohammadi, B., "Experimental Validation of an Empirical Nonlinear Shear Failure Model for Laminated Composite Materials," Journal of Composite Materials, Vol. 51, No. 16, 2017, pp. 2331-2345.   DOI
14 Lee, C.S., and Lee, J.M., "Development of Progressive Failure Analysis Method for Composite Laminates based on Puck's Failure Criterion-Damage Mechanics Coupling Theories," Journal of the Society of Naval Architects of Korea, Vol. 52, No. 1, 2015, pp. 52-60.   DOI
15 Kodagali, K., Progressive Failure Analysis of Composite Materials using the Puck Failure Criteria, Doctoral Dissertation, University of South Carolina., USA, 2017.
16 ASTM D3039/D3039M-14, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, 2014, pp. 1-13.
17 ASTM D5379/D5379M-12, Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method, ASTM International, 2012, pp. 1-14.
18 ASTM Standard D5528-13, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites, ASTM International, 2013, pp. 1-13.
19 ASTM Standard D7905/D7905M-13, Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites, ASTM International, 2013, pp. 1-18.
20 Dutton, S., Kelly, D., and Baker, A., Composite Materials for Aircraft Structures, American Institute of Aeronautics and Astronautics, 2004.
21 Hundley, J.M., Hahn, H.T., Yang, J.M., and Facciano, A.B., "Three-dimensional Progressive Failure Analysis of Bolted Titanium-graphite Fiber Metal Laminate Joints," Journal of Composite Materials, Vol. 45, No. 7, 2011, pp. 751-769.   DOI
22 Jeong, K.W., Choi, J.H., and Kweon, J.H., "A Study on the Strength of the Bolted Joint & Pin Joint with Hole Clearance," Composites Research, Vol. 25, No. 6, 2012, pp. 186-190.   DOI
23 Pi, J.W., Jeon, S.B., Lee, G.H., Jo, Y.D., Choi, J.H., and Kweon, J.H., "Joint Design and Strength Evaluation of Composite Air Spoiler for Ship," Composites Research, Vol. 28, No. 4, 2015, pp. 219-225.   DOI
24 ASTM D5961/D5961M-13, Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, ASTM Standard, 2013, pp. 1-31.
25 Laffan, M.J., Pinho, S.T., Robinson, P., and Iannucci, L., "Measurement of the in situ Ply Fracture Toughness Associated with Mode I Fibre Tensile Failure in FRP. Part I: Data Reduction," Composites Science and Technology, Vol. 70, No. 4, 2010, pp. 606-613.   DOI
26 Pinho, S.T., Robinson, P., and Iannucci, L., "Fracture Toughness of the Tensile and Compressive Fibre Failure Modes in Laminated Composites," Composites Science and Technology, Vol. 66, No. 13, 2006, pp. 2069-2079.   DOI