• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.215-215
• /
• 2005

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.606-610
• /
• 2007

This paper describes the Raman scattering characteristics of polycrystalline (poly) 3C-SiC thin films, in which they were deposited on the oxidized Si substrate by APCVD method according to growth temperature. Since the phonon modes were not measured for $0.4{\mu}m$ thick 3C-SiC, $2.0{\mu}m$ thick 3C-SiC deposited on the oxidized Si at $1180^{\circ}C$, in which TO (transverse optical mode) and LO (longitudinal optical mode) phonon modes were appeared at 794.4 and $965.7cm^{-1}$, respectively. The broad FWHM (full width half maximum) can explain that the crystallinity of 3C-SiC deposited at $1180^{\circ}C$ becomes polycrystalline instead of disorder crystal. Additionally, the ratio of intensity $I_{LO}/I_{TO}{\approx}1.0$ of 3C-SiC indicates that the crystal disorder of $3C-SiC/SiO_2/Si$ is small. Compared poly $3C-SiC/SiO_2$ with $SiO_2/Si$ interfaces, $1122.6cm^{-1}$ phonon mode was measured which may belong to C-O bonding and two phonon modes, 1355.8 and $1596.8cm^{-1}$ related to D and G bands of C-C bonding in the Raman range of 200 to $2000cm^{-1}$.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.654-659
• /
• 1997

HMDS[Si$_{2}$(CH$_{3}$)$_{6}$]단일 선구체를 이용하여 화학증착 방법으로 성장된 3C-SiC/Si(001) 이종접합박막의 특성을 XRD, 라만 스펙트럼 및 투과전자현미경(TEM)등을 이용하여 조사하였으며 시판되고 있는 상용 3C-SiC/Si 시편을 같은 방법으로 분석하여 특성을 비교검토하였다. $C_{3}$H$_{8}$-SiH$_{4}$-H$_{2}$혼합가스를 선구체로 이용하여 5$\mu\textrm{m}$두께로 성장된 상용 3C-SiC/Si 이종접합박막 시료의 XRD스펙트럼에서는 강한 3C-SiC(002)피크 만이 관찰되었으며, 라만 스펙트럼의 LO피크는 970nm$^{-1}$ 정도에서 강하게 나타났다. TEM 관찰 결과 다수의 전위, 쌍정, 적층결함 및 APB와 같은 결정결함들이 3C-SiC/Si 계면 근처에 집중적으로 분포되어 있었으며 성장된 박막은 단결정임을 확인할 수 있었다. 선구체로 HMDS를 사용하여 0.3$\mu\textrm{m}$ 및 2$\mu\textrm{m}$ 두께로 성장시킨 3C-SiC/Si 박막 시료의 XRD 스펙트럼은 다소 완만한 3C-SiC(002) 피크와 함께 3C-SiC(111)피크가 관찰되었으며, TEM으로 확인한 결과 소경각 결정립들이 약 5˚-10˚ 정도 방위차를 가지고 성장하여 기둥구조(columnar structure)를 이루고 있기 때문임을 알 수 있었다. 라만 스펙트럼 분석 결과 박막의 LO 피크가 967-969nm$^{-1}$정도로 다소 낮은 wavenumber쪽으로 이동되어 박막 내에 상당한 응력이 존재함을 확인할 수 있었다. 이와 같은 HMDS 3C-SiC박막의 특성은 성장 온도가 낮고 박막 성장용 가스로 사용한 HMDS 선구체에서 탄소가 과잉으로 공급되기 때문으로 제안되었다.다.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.137-142
• /
• 2012

This paper proposes a software development guidance and an evaluation index for the productivity related to Spring 2.5 and EJB 3.0 with same lightweight container architecture. Spring is a known successful open source standard model for lightweight container architecture. EJB in an enterprise environment as a standard framework is most commonly used in production. However, there is no comparison research about the performance of Spring 2.5 and EJB 3.0 Framework with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. In this study, the development platform environment based on the same pilot system Spring 2.5 and EJB 3.0 framework is in the design and implementation. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1265-1274
• /
• 2009

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Spring Framework 2.0 and 2.5. Spring Framework is a known successful open source standard model for lightweight container architecture. However, there is no comparison research about the performance of Spring Framework 2.0 and 2.5 with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. This work proposes an specific index for evaluating the productivity of new version Spring Framework on a platform. Base on the result, the specific guidance of the developing software is obtained.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.263-268
• /
• 2014

The purpose of this study is to provide a quantitative evaluation index of object-oriented software development productivity for EJB 3.0 and EJB 3.1. A lightweight container architecture is a newly-developed architecture in order to solve demerits that N-Tiers enterprise architecture has and to support merits therein. A lightweight container architecture is not as heavy as EJB(Enterprise JavaBeans) architecture is, whereas it provides all the functionality of the EJB container. However, there have been insufficient studies on a performance evaluation of EJB 3.0 and EJB 3.1 on an identical platform. Since a quantitative analysis has been performed only with respect to a partial LoC(Line of Code) analysis, there have been insufficient objective evaluation indeces and guidelines for a new specification released. Accordingly, there has been limited evaluation of software development productivity and on new innovations in a project. Therefore, this study designed and implemented a movie reservation system in EJB 3.0 and EJB 3.1, which was based on the same development platform environment. This study then intends to provide evaluation guidelines for an objective software development productivity cl LoC(Lineand standardization thereof by development platform environment.

• Journal of Science Education
• /
• v.39 no.1
• /
• pp.28-43
• /
• 2015

The purpose of this study was to measure middle and high school students' stage of concern(SoC) and their level of use(LoU) on the self-directed learning in science learning based on the CBAM(Concern-Based Adoption Model). Additionally, this research was designed to analyze the difference between the degree of students' SoC and their LoU according to the their background variables. For this, 440 middle and high school students participated in the research. The results of this study were as follow: Firstly, since the students' SoC and LoU about the self-directed learning in science learning are low(Stage0 : awareness and Level II : preparation), we should draw students' immediate concern by developing training programs that would enable them to actually participate in the process of implementing the self-directed learning. Secondly, the students' SoC and LoU on self-directed learning in science learning vary depending on their residence, gender, and grade. This is the reason why we have to develop customized training programs on self-directed learning that suits their background. Thirdly, it shows that students, who have higher concern on self-directed learning in science learning, implement it better than those who are not concerned with it at all. It implies that we need a training program that considers both the students' concern and implementation on self-directed learning in science learning.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.447-455
• /
• 2014

In this research, n-based 4H-MOS Capacitor was fabricated with PECVD (plasma enhanced chemical vapor deposition) process for improving SiC/$SiO_2$ interface properties known as main problem of 4H-SiC MOSFET. To overcome the problems of dry oxidation process such as lower growth rate, high interface trap density and low critical electric field of $SiO_2$, PECVD and NO annealing processes are used to MOS Capacitor fabrication. After fabrication, MOS Capacitor's interface properties were measured and evaluated by hi-lo C-V measure, I-V measure and SIMS. As a result of comparing the interface properties with the dry oxidation case, improved interface and oxide properties such as 20% reduced flatband voltage shift, 25% reduced effective oxide charge density, increased oxide breakdown field of 8MV/cm and best effective barrier height of 1.57eV, 69.05% reduced interface trap density in the range of 0.375~0.495eV under the conduction band are observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.921-926
• /
• 2006

The Presence of a line-of-sight(LoS) blockage can degrade the UWB positioning accuracy for two reasons. Firstly, it makes estimation of the time of arrival(ToA) of the direct path signal difficult by complicating the multipath structure of the propagation channel. Secondly, the higher dielectric constant of the LoS blocking material than that of free space introduces excess propagation delay which will bias the range estimation. In this paper, methods based on ray tracing to reduce the ranging error resulting from the second reason are Posed. We take two different approaches; a statistical approach and a map-aided method. In the statistical approach, we establish a conditional distribution of the excess propagation delay caused by LoS blockages using a ray tracing technique. The lo6wer bound of the ranging performance based on this model is estimated. Ine ray tracing method is also used for the map-aided ToA positioning approach. UWB propagation measurement data taken in an office environment is used to examine the performance of this method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.552-559
• /
• 2002

The EM(Engineering Model) LO(Local Oscillator) is designed for Ka-band satellite transponder. The VCO(Voltage Controlled Oscillator) is implemented using a high impedance inverter coupled with dielectric resonator to improve the phase noise performance out of the loop bandwidth. The phase of VCO is locked to that of a stable OCXO(Oven Controlled Crystal Oscillator) by using a SPD(Sampling Phase detector) to improve phase noise performance in the loop bandwidth. This LO exhibits the harmonic rejection characteristics above 43.83 dBc and requires 15 V and 160 mA. The phase noise characteristics are performed as -102.5 dBc/Hz at 10 KHz offset frequency and -104.0 dBc/Hz at 100 KHz offset frequency, respectively, with the output power of 13.50 dBm$\pm$0.33 dB over the temperature range of -20~+7$0^{\circ}C$.