• Resources Recycling
• /
• v.31 no.4
• /
• pp.40-48
• /
• 2022

In waste lithium iron phosphate (LFP) batteries, the cathode material contains approximately 4% lithium. Recycling the constituent elements of batteries is important for resource circulation and for mitigating the environmental pollution. Li contained in the waste LFP cathode powder was selectively leached using persulfate-based oxidizing agents, such as sodium persulfate, potassium persulfate, and ammonium persulfate. Leaching efficiency and waste LFP powder properties were compared and analyzed. Pulp density was used as a variable during leaching, which was performed for 3 h under each condition. The leaching efficiency was calculated using the inductively coupled plasma (ICP) analysis of the leachate. All types of persulfate-based oxidizing agents used in this study showed a Li leaching efficiency over 92%. In particular, when leaching was performed using (NH₄)₂S₂O₈, the highest Li leaching percentage of 93.3% was observed, under the conditions of 50 g/L pulp density and an oxidizing agent concentration of 1.1 molar ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.61-64
• /
• 2002

The present age, it takes an interest in maintenance and preserve of the aged constructive materials cause destruction of environmental reason and a loss of resource. As answering question given to candidates at a civil examination, it is carbonated concrete construction materials to give alkalization agent to seek the plan to be extended durable life. The representative material, it was known for a chemical compound of alkailzation-Silica acid with Lithium and also used on inside and outside the country. But, it is so difficult to decide the effect because the work is to be repeated for a processing of construction. So, in this study, to investigate recovery faculty on a period of incubation that restrain processing of carbonation by impregnation alkalization agent, we were made good progress from basic test through comparative and analysis at laboratory and the spot of construction.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.8-12
• /
• 2015

As NMP (N-Methyl-2pyrrolidone) is becoming important in many fields, the demand for it is also rising rapidly. With its chemical property of high boiling point, low vapor pressure and high water solubility, it is easy to recover it after processing. Therefore, it is increasingly needed to develop a system that effectively recovers NMP solvent. The study produced a system modeling using AMESim software before developing high purity solvent recovery (HPSR) system to recover NMP solvent. Then, it verified reliability by comparing the simulation model with the test result.

• Applied Chemistry
• /
• v.16 no.1
• /
• pp.73-76
• /
• 2012

Due to the developments of communications equipment and electronic devices, lithium ion secondary battery usage is growing. Along with demand increasing, the amount of scrap has been steadily increasing. In this study, method of cobalt recovery using organic eco-friendly is proposed. Sulfuric acid, Malic acid, Citric acid at reflux device had good cobalt leaching efficiency. And Sulfuric acid, Malic acid at the autoclave increased cobalt leaching efficiency.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.699-710
• /
• 2019

Electric vehicles (EVs) are spreading rapidly and many counties are promoting hybrid and fully EVs through legislation. Therefore, an increasing amount of lithium ion batteries will reach the end of their usable life and will require effective and sustainable end-of-life management plan which include landfill disposal or incineration. The current research focuses on more sustainable methods such as remanufacturing, reuse and recycling in order to prepare for future battery compositions and provide insights to the need recycling methods to be developed to handle large amounts of batteries sustainably in the near future. The two most prominent material recovery techniques are hydrometallurgy and pyrometallurgy which are explored and assessed on their relative effectiveness, sustainability, and feasibility. Hydrometallurgy is a superior recycling method due to high material recovery and purity, very low emissions, high prevalence of chemical reuse and implementation of environmentally sustainable compounds. Expanding recycling technologies globally should take the research and technologies pioneered by Umicore to establish a sustainable recycling program for end-of-life EVs batteries. Emerging battery technology of Telsa show the most effective designs for high performance batteries includes the use of silicon which is expected to increase capacity of batteries in the future.

• Journal of Powder Materials
• /
• v.28 no.6
• /
• pp.497-501
• /
• 2021

Cobalt (Co) is mainly used to prepare cathode materials for lithium-ion batteries (LIBs) and binder metals for WC-Co hard metals. Developing an effective method for recovering Co from WC-Co waste sludge is of immense significance. In this study, Co is extracted from waste cemented carbide soft scrap via mechanochemical milling. The leaching ratio of Co reaches approximately 93%, and the leached solution, from which impurities except nickel are removed by pH titration, exhibits a purity of approximately 97%. The titrated aqueous Co salts are precipitated using oxalic acid and hydroxide precipitation, and the effects of the precipitating agent (oxalic acid and hydroxide) on the cobalt microstructure are investigated. It is confirmed that the type of Co compound and the crystal growth direction change according to the precipitation method, both of which affect the microstructure of the cobalt powders. This novel mechanochemical process is of significant importance for the recovery of Co from waste WC-Co hard metal. The recycled Co can be applied as a cemented carbide binder or a cathode material for lithium secondary batteries.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.73-80
• /
• 2022

Reduction smelting of spent lithium-ion batteries at high temperature produces metallic alloys. Following solvent extraction of the leaching solutions of these metallic alloys with either sulfuric or hydrochloric acid, the raffinate is found to contain Ni(II), Co(II), Mn(II), and Si(IV). In this study, two cationic exchange resins (Diphonix and P204) were employed to investigate the loading behavior of these ions from synthetic sulfate and chloride solutions. Experimental results showed that Ni(II), Co(II), and Mn(II) could be selectively loaded onto the Diphonix resin from a sulfate solution of pH 3.0. With a chloride solution of pH 6.0, Mn(II) was selectively loaded onto the P204 resin, leaving Ni(II) and Si(IV) in the effluent. Elution experiments with H₂SO₄ and/or HCl resulted in the complete recovery of metal ions from the loaded resin.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.21-29
• /
• 2014

This study was conducted to obtain the basic data for designing the lithium recovery process from the "salar de Uyuni" in Bolivia. For this study, the mock brine which has the similar chemical composition with the brine of "salar de Uyuni" was prepared, and the effects of reaction factors such as temperature, time, pH and so forth on the precitation reaction of magnesium hydroxide were investigated.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.2
• /
• pp.1-14
• /
• 2018

The recent increase in demand for lithium has led to the development of new brine prospects, The brines are hosted in closed salar basin aquifers of two types that are mature halite salars and immature clastic salars. Salar brines also contain other elements of commercial interest, most notably potassium and boron. As a result, there has been a plethora of new exploration projects focused on the brines hosted in the aquifers of the intermontane-closed basins. The estimate of lithium resources and reserves in these salars depends on a detailed knowledge of aquifer geometry, porosity, and brine grade. Because the resource is in a fluid state, it has the propensity to move, mix, rearrange itself relatively rapidly during the course of a project lifetime, and lower recovery factors compared with most metalliferous and industrial mineral deposits due to reliance on pumping of the brine from wells for extraction. This is unlike any other type of metallic mineral resource and hence a different approach specially focusing on hydrogeology and brine hydrology is required for these prospects.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.25-31
• /
• 2021

Smelting reduction of spent lithium-ion batteries results in the production of metallic alloys in which reduced cobalt, nickel and copper coexist. In this study, we investigated the leaching of the metallic alloys containing the above three metals together with iron, manganese, and silicon. The mixture of hydrochloric acid and hydrogen peroxide as an oxidizing agent was employed, and the effect of the concentration thereof, the reaction time and temperature, and pulp density was investigated to accomplish the complete leaching of cobalt, nickel, and copper. The effect of the hydrogen peroxide concentration and pulp density on the leaching was prominent, compared to that of reaction time and temperature, especially in the range of 20 to 80℃. The complete leaching of the metals present in metallic alloys, except silicon, was accomplished using 2 M HCl and 5% H₂O₂ with a pulp density of 30 g/L for 150 min at 60℃.