• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.41-49
• /
• 2020

In this study poly(carbazole) films deposited on stainless steel have been investigated as electrode material for supercapacitor applications. Poly(carbazole) films were electrodeposited using cyclic voltammetry in presence of lithium, sodium and tetrabutylammonium perchlorate salts. Poly(carbazole) films doped with perchlorate anions having different counter cations were characterized by SEM, ATR-FTIR and solid state conductivity measurements. Capacitive behaviours of PCz coated steel electrodes were tested by cyclic voltammetry, charge-discharge analysis and electrochemical impedance spectroscopy. It was found that counter cation of the dopant is significantly effective on the capacitive performance on the obtained PCz films and the PCz film synthesized from lithium perchlorate has the better capacitive performance than the poly(carbazole)s synthesized from sodium perchlorate and tetrabutylammonium perchlorate salts.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.222-228
• /
• 2011

Poly(vinyl chloride)-g-poly(oxyethylene methacrylate) (PVC-g-POEM) graft copolymer was synthesized via atom transfer radical polymerization (ATRP) and used as an electrolyte for electrochromic device. Plasticized polymer electrolytes were prepared by the introduction of propylene carbonate (PC)/ethylene carbonate (EC) mixture as a plasticizer. The effect of salt was systematically investigated using lithium tetrafluoroborate ($LiBF_4$), lithium perchlorate ($LiClO_4$), lithium iodide (LiI) and lithium bistrifluoromethanesulfonimide (LiTFSI). Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) measurements showed that the structure and glass transition temperature ($T_g$) of polymer electrolytes were changed due to the coordinative interactions between the ether oxygens of POEM and the lithium salts, as supported by FT-IR spectroscopy. Transmission electron microscopy (TEM) showed that the microphase-separated structure of PVC-g-POEM was not greatly disrupted by the introduction of PC/EC and lithium salt. The plasticized polymer electrolyte was applied to the electrochromic device employing poly(3-hexylthiophene) (P3HT) conducting polymer.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.177-183
• /
• 1998

By the reactions of a $C_{2}$-chiral ligand, (+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene(6) with $[\pi-allyl chloroplatinum(II)]_4$, and $CpCo(CO)_2$ respectively, three new complexes, ($\pi$-allyl)platinum(II)(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene perchlorate(1), ($\pi$-allyl)platinum(II)(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene chloride(2), ($\eta^5$-cyclopentadienyl)cobalt(I)-(+)-11S,12S-bis[2,2'-(diphenylphosphino)benzanilido]-9,10-dihydro-9,10-ethanoanthracene(3) were prepared. $\eta^3$-Cyclohexenyl)palladium(II)1,2-bis(diphenylphosphino)ethane perchlorate(4) was obtained by the reaction of ($\eta^3$-cyclohexenyl)palladium(II) chloride dimer with a symmetric ligand, 1,2-bis(diphenylphosphino)ethane and lithium perchlorate. These complexes were identified by NMR-, IR-, and Mass-Spectrophotometers and elemental analyzer.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.110-115
• /
• 2010

The plasticized polymer electrolytes based on polyvinylidene fluoride-co-hexafluoropropylene (P(VdF-co-HFP)), tetra (ethylene glycol) dimethyl ether (TEGDME), and lithium perchlorate ($LiClO_4$) are prepared for the lithium sulfur batteries by solution casting with a doctor-blade. The polymer electrolyte with EO : Li ratio of 16 : 1 shows the maximum ionic conductivity, $6.5\;{\times}\;10^{-4}\;S/cm$ at room temperature. To understand the effect of the salt concentration on the electrochemical performance, the polymer electrolytes are characterized using electrochemical impedance spectroscopy (EIS), infrared spectroscopy (IR), viscometer, and differential scanning calorimeter (DSC). The optimum concentration and mobility of the charge carriers could lead to enhance the utilization of sulfur active materials and the cyclability of the Li/S unit cell.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.4
• /
• pp.198-203
• /
• 2011

A polymer electrolyte was prepared by using polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP) or poly(ethylene glycol) dimethacrylate (PEGDMA) as polymer matrices, succinonitrile as an additive, and lithium perchlorate as a lithium salt. Compared to the polymer electrolyte employing PVdF-HFP, the PEGDMA-based polymer electrolyte exhibits substantially superior thermal stability when exposed to high temperatures. Nonetheless, the ionic conductivity of the PEGDMA-based polymer electrolyte was preserved in a wide temperature range between $-20^{\circ}C$ and $80^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.33-34
• /
• 2004

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.292-295
• /
• 2001

A cross-linked solid polymer electrolyte was prepared by copolymerizing photochemically acrylonitrile (AN), oligo(ethylene glycol ethyl ether) methacrylate, oligo(ethylene glycol) dimethacrylate in the presence of lithium perchlorate as a lithium salt, ethylene carbonate-propylene carbonate as a mixed plasticizer, and poly(ethylene oxide) as a polymer matrix. The maximum ionic conductivity of the polymer electrolyte was 2.35$\times$10$\^$-3/ S/cm. The interface resistance of the polymer electrolyte was very low compared to that of the polymer electrolyte without AN. The former electrolyte was stable up to 4.3 V and the Ah efficiency was nearly 100% during the charge-discharge cycle.

• Journal of the Korean Chemical Society
• /
• v.53 no.2
• /
• pp.159-165
• /
• 2009

The synthesis of 2-amino-5-substituted-1,3,4-oxadiazoles 4 were carried out from the electrooxidation of semicarbazone 3 at the platinum electrode under controlled potential electrolysis in an undivided cell. This is an environmentally benign method in the field of synthetic organic chemistry. The non-aqueous solvents acetic acid and acetonitrile and a supporting electrolyte lithium perchlorate were used for the electrolysis in the electrooxidation. The products were structurally charecterised by IR, $^1H$-NMR, $^{13}C$-NMR and elemental analysis.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.137-143
• /
• 2004

The determination of 2-mercapto-1-methyl-imidazole (MMI) in 5.0${\times}10^{-2}$ M lithium perchlorate suporting electrolyte has been investigated by the differential pulse polarography. The optimum condition of MMI analysis was as follows; -0.9 volts initial potential, 0.08 mV pulse height, 2 mV/sec scan rate, and medium mercury drop size. Standard calibration curve showed a good linearlity in the range of 1.0${\times}10^{-7}M\;to\;8.0{\times}10^{-5}$ M and the detection limit has been (2.2${\pm}0.1){\times}0.1^{-9}$ M. This method was applicated for the determination of MMI in antithyroid drug without interference of additives.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.17-23
• /
• 1995

The determination method of 2-mercapto-1-methyl-imidazole(MMI) in $5.0{\times}10^{-2}M$ lithium perchlorate solution has been investigated by the differential pulse polarography. The optimum conditions for the determination of MMI were as fellows; -0.9 volt(vs. Ag/AgCl) initial potential, 80mV pulse height, 2mV/sec scan rate, and medium mercury drop size. The calibration curve showed a good linearlity in the range of $1.0{\times}10^{-7}M$ to $8.0{\times}10^{-5}M$ and the detection limit was $2.2{\times}10^{-9}M$. This method was applicable to the determination of MMI in thyroid drugs without interference from the additives.