• Journal of Pharmaceutical Investigation
• /
• v.14 no.4
• /
• pp.161-169
• /
• 1984

The tests of dissolution and bioavailability of six formulas of lorazepam tablet under various binders were performed. Lorazepam can be seperated in pharmaceutical preparation and biological plasma by high performance liquid chromatograph. Dissolution process of lorazepam tablet was largely influenced by binder and the dissolution rate was increased by sodium starch glycolate and microcrystalline cellulose, the slower dissolution rate in starch. Bioavailability of lorazepam tablet got relationship with dissolution rate, because tablets containing sodium starch glycolate and microcrystalline cellulose as binder maintained higher plasma level than other binders.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.78-84
• /
• 2016

The FHX (Forced-draft sodium-to-air Heat Exchanger) employed in the ADHRS (active decay heat removal system) is a shell-and-tube type counter-current flow heat exchanger with M-shape finned-tube arrangement. Liquid sodium flows inside the heat transfer tubes and atmospheric air flows over the finned tubes. The unit is placed in the upper region of the reactor building and has function of dumping the system heat load into the final heat sink, i.e., the atmosphere. Heat is transmitted from the primary cold sodium pool into the ADHRS sodium loop via DHX (decay heat exchanger), and a direct heat exchange occurs between the tube-side sodium and the shell-side air through the FHX tube wall. This paper describes the DHRS and the structural design of the FHX.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.1
• /
• pp.54-58
• /
• 1998

The stability of ceftriaxone sodium 100 mg/ml in the water for injection was tested at two temperature conditions (refrigerator and room temperature) and two storage containers (vitro and syringe). The stability of each sample was determined by high-performance liquid chromatography while storing for 5 days at room temperature and 27 days at refrigerator. The concentration of ceftriaxone sodium was 100 mg/ml which the hospital usually use as a filling preparation for I.V. push or Y-site injection. There was no significant difference between the storage in vials and syringes. There was no significant difference in the change of concentration until storing the reconstituted ceftriaxone sodium injection for 2 days at room temperature and 14 days at refrigerator. In conclusion, the ceftriaxone sodium 100 mg/ml in the water for injection can be stored in vial or syringe for 2 days at room temperature and 14 days at refrigerator after preparation.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.13-19
• /
• 2005

An experimental study is presented for extinguishing characteristics of liquid fuel fire by water mist containing sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing an additive, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space to measure flame temperature variation. The average evaporation rate of a water droplet containing an additive was lower than that of a pure water droplet at a given surface temperature due to the precipitation of salt in the liquid-film and change of surface tension. In case of using an additive, the flame temperature was lower than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing an additive was increased reducing flame size. And also dissociated metal atoms, sodium, were reacted as a scavenger of the major radical species OH^-,\;H^+$ which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.647-653
• /
• 2007

In ready mixed concrete factory, in case of using the high molecular additive in winter especially the liquid additive for the early strength, it is required to check the stability. In this research, the freezing and gelling characteristics of the liquid additive for the early strength is reviewed, the material and mechanical solution are proposed to that the practical quality control method will be suggested. As the result, the Freezing temperature of the liquid additive for the early strength is $-11.8^{\circ}C$, and it is the lower than the temperature at which the strength is shown. By making with sodium silicate of $37{\pm}0.5%$ designed by $SiO_2\;and\;Na_2O$ in 0.31 of mol ratio, it minimizes the gelling at the lower temperature. On the other hand, facilities for storing and supplying the material should be set at $40^{\circ}C$ so the temperature distribution is well spreaded for practical operation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.563-567
• /
• 2003

Various bacterial strains were isolated from rice field ditch water, and their seaweed degrading activities were investigated. They were incubated in a liquid medium of sea tangle (Laminaria iaponica) and sea mustard (Undaria pinnatifida) powder for 3 weeks. Ratios of reduced sugar to total sugar of the liquid medium were measured once a week. Ratios of reduced sugar to total sugar of 27A311, 27C221 27A111 and 27B121 strains were highest. Accordingly, these four strains were incubated in 3 different liquid media of sodium alginate, sea tangle powder, and sea mustard powder for 3 or 4 weeks. The ratios of reduced sugar to total sugar and cell growth were measured once a week. Cell growth was higher in 27A111 and 27C221. Ratios of reduced sugar to total sugar was higher for 27C221 in the liquid mediums with sodium alginate and sea mustard powder, and for 27A111 in the liquid medium with sea tangle powder.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.700-711
• /
• 2015

Sodium-cooled fast breeder reactors use liquid sodium as a moderator and coolant to transfer heat from the reactor core. The main hazard associated with sodium is its rapid reaction with water. Sodium-water reaction (SWR) takes place when water or vapor leak into the sodium side through a crack on a heat-transfer tube in a steam generator. If the SWR continues for some time, the SWR will damage the surface of the defective area, causing it to enlarge. This self-enlargement of the crack is called "self-wastage phenomena." A stepwise numerical evaluation model of the self-wastage phenomena was devised using a computational code of multicomponent multiphase flow involving a sodium-water chemical reaction: sodiumwater reaction analysis physics of interdisciplinary multiphase flow (SERAPHIM). The temperature of gas mixture and the concentration of NaOH at the surface of the tube wall are obtained by a numerical calculation using SERAPHIM. Averaged thermophysical properties are used to assess the local wastage depth at the tube surface. By reflecting the wastage depth to the computational grid, the self-wastage phenomena are evaluated. A two-dimensional benchmark analysis of an SWAT (Sodium-Water reAction Test rig) experiment is carried out to evaluate the feasibility of the numerical model. Numerical results show that the geometry and scale of enlarged cracks show good agreement with the experimental result. Enlarged cracks appear to taper inward to a significantly smaller opening on the inside of the tube wall. The enlarged outer diameter of the crack is 4.72 mm, which shows good agreement with the experimental data (4.96 mm).

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.143-147
• /
• 1962

As a part of "the Fundamental Study of Pyrometallurgical Debismuthizing of Lead", the author has studied liquid Pb-Bi, Pb-Na, Bi-Na binaries and Pb-Bi-Na ternary including Pb rich side composition which forms a basis of the Dittmer method. In this study, debismuthizing mechanism of the Dittmer method pertaining to the lead rich corner of the system studied was classified by the results of thermal analysis, solubility determination of Bi and Na in liquid Pb and debismuthizing test by adding metallic sodium. For instance eutectic trough in lead rich corner of Pb-Bi-Na ternary relating to the Dittmer method was determined.

• Journal of the Korean Society of Safety
• /
• v.5 no.3
• /
• pp.39-43
• /
• 1990

The transport of phenol from waste water through the liquid surfactant membrane containing Aliquat 336 as a carrier was analyzed by a theoretical model. Extraction experiments was carried out to investigate the effect of process parameters, such as mixing intensity, concentration of sodium hydroxide in internal aqueous solution, and counter anions, and initial phenol concentration in waste water at $25^{\circ}C$. It was found that transport rate of phenol increased with increasing pH differents. The transport rate of phenol in waste water was influenced by counter anions.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.44-48
• /
• 1994

Cellulose triacetate(CTA) liquid crystal solutions obtained via dissolution of CTA in solvent mixture of triflucroacetic acid and methylene chloride were spun and saponified in various chemicals. Among chemicals, methanol/sodium hydroxide mixture endowed highest tenacity as well as modulus to regenerated cellulosic fiber and the fiber thereof showed Cell I or Cell IV morphology, or mixed morphology of Cell I and IV.