• 한국안전학회지
• /
• 제35권1호
• /
• pp.1-11
• /
• 2020

Article 325 (Prevention of Fire Explosion due to Electrostatic) of the Rule for Occupational Safety and Health Standard specifies that in order to prevent the risk of disasters caused by static electricity, fire, explosion and static electricity in the production process, However, in order to do this, it is absolutely necessary to use a pre-detection technology and a detector for antistatic discharge prediction, which is a precautionary measure by static electricity in a fire / explosion hazard place, but in Korea, And there is no technical standard for the application of the technology of the explosion proof structure of the related equipment. Research methods include domestic and overseas electrostatic discharge detection technology and literature investigation of related equipment explosion proofing technology, domestic and foreign electrostatic discharge detection device production and use situation investigation, advanced foreign technology data analysis and benchmarking. In particular, we sought to verify the results of empirical experiments using electrostatic discharge detection technology through sample purchase and analysis of related major products, development of optimization technology through prototype production, evaluation, and supplementation, and expert knowledge through expert consultation. The results of this study were developed and fabricated two prototypes of electrostatic discharge detector based on the technology / standard related to electrostatic discharge detection technology in Korea and abroad through development of electrostatic discharge detection technology and development and production of detector. In addition, based on the development of electrostatic discharge detection technology, we developed an intrinsic safety explosion proof ib class explosion proof technology applicable to the process of using and handling flammable gas and flammable liquid vapor and combustible dust. In the case of the over voltage and minimum voltage are supplied to the explosion-proof structure ESD detector, check the state of the circuit and the transient and transient currents generated by the coil and capacitor elements during the input and standby of the signal pulse voltage. Explosion-proof equipment-Part 11: Intrinsically safe explosion proof structure The comparative evaluation with the reference curve in Annex A of "i" confirms that the characteristics of the intrinsically safe explosion protection structure are met.

• 식물조직배양학회지
• /
• 제25권1호
• /
• pp.13-19
• /
• 1998

Electroporation을 이용한 형질전환 연구에서 원형질체 대신 체세포 배발생 세포를 이용하여도 DNA가 도입될 수 있음을 이미 보고한 바 있다. 본 연구는 배발생 세포 내로 DNA를 도입하기 위한 electroporation의 최적 조건, 즉 전압과 capacitance 수준, promoter 종류, DNA 농도, 저온처리효과 등을 구명하며, 처리에 따른 DNA의 전입 현상을 이해하고 전기충격후의 생장과 분화 정도를 조사하고자 수행되었다. 들잔디 미숙배를 2,4-D가 2 mg/L 함유된 MS배지에서 배양하여 배발생 캘러스를 유도하였고, 동일 조성의 액체배지에 진탕배양하여 조직 electroporation에 적합한 현탁배양 세포괴를 증식할 수 있었다. 100-400 V의 전압과 10-1980 $\mu\textrm{F}$의 capacitance 수준에서 세포괴를 35S-gusA 조성을 갖는 운반체 DNA와 함께 electroporation 하였을 때, 전반적으로 DNA가 도입되었음을 표지유전자 gusA의 transient 발현을 통하여 확인하였으며, 200-300 V 전압과 330-800 $\mu\textrm{F}$ capacitance 수준이 보다 효과적인 경향을 보였다. 처리시 온도는 큰 영향을 미치지 않았으며, 6 $\mu\textrm{g}$/mL 이상의 DNA 농도에서는 GUS 발현이 양호하였다. 배발생 캘러스 세포주들은 모두 DNA가 도입 되었으나 비 배발생 캘러스 세포주는 11개중 하나에서만 도입이 확인되었다. Electroporation시 전기충격후 20, 40시간 후에 DNA를 첨가하여도 gusA가 발현됨에 따라 전기충격이 세포막의 침투성을 장시간 변화시킴으로써 DNA가 전이될 수 있는 것임을 확인할 수 있었다. GusA의 promoter로 CaMV 35S외에 Actl과 Ubil의 활성을 비교한 바, 35S에 비해 각각 7배, 5배의 활성을 나타내었다. Electroporation 처리후 세포괴의 배양실험에서 100-400 V의 전압과 10-l980 $\mu\textrm{F}$ capacitance의 전 처리 범위에서 캘러스의 지속적인 생장과 함께 식물체 재분화가 일어났다.

• 폴리머
• /
• 제33권5호
• /
• pp.496-500
• /
• 2009

광학 보상 휨 액정디스플레이(OCB-LCD)는 빠른 응답속도와 광 시야각 특성 때문에 응용 분야가 많다. 하지만 OCB-LCD는 초기에 splay 상태로 배열되어 있고 계조 구동은 bend 상태에서 이루어지기 때문에 초기 splay 상태에서 bend 상태로의 빠른 전이가 필요하다. 기존에 순간적으로 고전압을 인가하는 방식과 달리 본 연구에서는 임계 전압과 광경화성 반응성 단량체의 고분자화를 통한 표면 선경사각 형성으로 초기 상태부터 bend 상태를 갖는 OCB-LCD를 제조하였다. 제조된 액정 셀의 전기 광학적 및 전기적 특성을 분석한 결과 본 연구에서 제조된 셀은 기존 OCB 셀에 비해 고 선경사각으로 인한 고속응답 특성을 보여주었고 액정 단량체에 의해 형성된 배향막 위의 고분자 층 형성에 따른 잔류 DC 값은 0.1 V 보다 적었다.

• 대한환경공학회지
• /
• 제30권12호
• /
• pp.1218-1224
• /
• 2008

본 연구는 yeast의 한 종류인 Candida tropicalis 배양액을 유동상 반응기 형태로 운전하여 대표적인 휘발성유기화합물인 톨루엔의 제거효율을 향상시키기 위해 수행되었으며, 톨루엔 흡착과 물질전달 능력을 동시에 향상시키기 위해서 생물반응기의 유동상 물질로는 입상활성탄(GAC)을 사용하였다. 효모를 적용한 GAC 유동상반응기는 유입 톨루엔 부하 13.1$\sim$37.4 g/m$^3$-hr 범위에서 50$\sim$80%의 처리효율을 나타내었다. 또한 톨루엔 유입부하 291 g/m$^3$-hr 조건에서 최대분해능 172 g/m$^3$-hr을 얻어, 본 연구의 GAC 유동상반응기가 안정적이면서도 높은 처리효율을 나타낼 수 있음을 확인하였다. 충격부하 실험에서는 유입농도의 갑작스런 변화에도 일정하게 처리효율을 유지함으로써, 유입농도의 변화에도 안정적인 반응기 운전이 가능하다는 것을 알 수 있다. 최대분해능실험 결과 유입농도가 2배 이상 증가하였으나 처리효율은 일정하게 유지되었으며, 유입된 톨루엔이 GAC에 먼저 흡착된 후 천천히 탈착되어 효모에 의해 분해됨을 확인하였다. 따라서 유동상으로 투입된 GAC가 톨루엔의 물질전달을 향상시켜 미생물반응기의 전체 처리효율을 증가시켰다.

• 한국분무공학회지
• /
• 제20권2호
• /
• pp.65-69
• /
• 2015

In this study, the thermal performance of vehicle's cooling system is experimentally investigated using the water/coolant-based $Al_2O_3$ nanofluids as working fluids. For the purpose, the water/coolant-based $Al_2O_3$ nanofluids are prepared by twostep method with gum arabic. In order to obtain the well-suspended nanofluids, the agglomerated $Al_2O_3$ nanoparticles are precipitated using centrifugal force and the experiments are performed with supernatant of them. The thermal conductivity is measured by transient hot wire method and the thermal conductivity of nanofluids is enhanced up to 4.8% as compared to that of base fluids. Moreover, the cooling performance of water/coolant-based $Al_2O_3$ nanofluids is evaluated using vehicle's engine simulator under the constant RPM condition. The results show that the cooling performance of automobile engine increases up to 5.9% using prepared nanofluids. To investigate the effect of nanofluids on exhaust gas, the $NO_x$ emission is measured during the operation with respect to time and 10.3% of $NO_x$ emission is decreased. The experimental results imply that the water/coolant-based $Al_2O_3$ nanofluids might be used as a next-generation vehicles' coolant

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.90-98
• /
• 2016

A numerical study is conducted on thermal performance of a large-area hot plate specially designed as a heating and cooling tool for thermal nanoimprint lithography process. The hot plate has a dimension of $240mm{\times}240mm{\times}20mm$, in which a series of cartridge heaters and cooling holes are installed. The material is stainless steel selected for enduring the high molding pressure. A numerical model based on the ANSYS Fluent is employed to predict the thermal behavior of the hot plate both in heating and cooling phases. The PID thermal control of the device is modeled by adding user defined functions. The results of numerical computation demonstrate that the use of cartridge heaters provides sufficient heat-up performance and the active liquid cooling in the cooling holes provides the required cool-down performance. However, a crucial technical issue is raised that the proposed design poses a large temperature non-uniformity in the steady heating phase and in the transient cooling phase. As a remedy, a new hot plate in which heat pipes are installed in the cooling holes is considered. The numerical results show that the installation of heat pipes could enhance the temperature uniformity both in the heating and cooling phases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.489-493
• /
• 2005

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact testredesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.125-132
• /
• 2012

Urea-SCR system, which converts nitrogen oxides to nitrogen and water in the presence of a reducing agent, usually AdBlue urea solution, is known as one of the powerful NOx reduction systems for mobile as well as stationary applications. For its consistent and reliable operation in mobile applications, such various problems as transient injection, ammonia slip, and freezing in cold weather have to be resolved. In this work, therefore, numerical study on three-dimensional unsteady heating problems were analyzed to understand the melting and heat transfer characteristics such as urea liquid volume fraction, temperature profiles and generated natural convection behavior in urea solution by using the commercial software Fluent 6.3. After validating by comparing numerical and experimental data with pure gallium melting phenomena, numerical experiment for urea melting is conducted with three different coolant heating models named CH1, 2, and 3, respectively. Finally, it can be found that the CH3 model, in which more coolant is concentrated on the lower part of the urea tank, has relatively better melting capability than others in terms of urea quantity of $1{\ell}$ for start-up schedule.

• 대한약리학회지
• /
• 제18권1호
• /
• pp.17-22
• /
• 1982

Zizyphus seed(Zizyphus vulgaris Lamark var. Spinosus Bunge) has long been used as hypnotics and sedatives in oriental medicine, and it is reported that the Zizyphus seed elicited a variety of pharmacologic actions besides CNS depression. Present study was undertaken to investigate the effects of Zizyphus seed on the central nervous system and on the blood pressure. The effect of Zizyphus seed on the central nervous system was measured by the influence of thiopental sleeping time and by inhibition of chemical convulsion (strychnine and pentylenetetrazol induced). Blood pressure changes by Zizyphus extract and its mode of action were investigated. The ground Zizyphus seed was extracted with hexane and methanol, consecutively and the supernatants were discarded. The precipitate was re-extracted with distilled water and the supernatant was evaporated to a dark-brownish sticky liquid, which was used as Zizyphus seed extract in this study after dissolving in saline prior to experiment. The results are as follows. 1) Zizyphus seed extract caused marked prolongation of the thiopental sleeping time in mice. 2) The chemical convulsion by strychnine and pentylenetetrazol, and the mortality by them in chicks were not affected by pretreatment of Zizyphus seed extract. 3) Zizyphus seed extract produced transient fall of blood pressure in the cat, and this hypotentive effect was blocked partially by atropine but not affected by bilateral vagotomy and/or hexamethonium, nor propranolol and, chlorpheniramine and/or cimetidine. With the above results, it may be suggested that the water extract of Zizyphus seeds contains components producing CNS depression and hypotension. Furthermore it is felt that the cholinergic effect, but not the adrenergic or histaminergic, is partly responsible for the hypotensive effect of Zizyphus seed extract.

• 한국안전학회지
• /
• 제35권4호
• /
• pp.84-91
• /
• 2020

The Korean nuclear industry developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code and this code adpots two-phase flows, two-fluid, three-field models which are comprised of gas, continuous liquid and droplet fields and has a capability to simulate three-dimensional model. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for accident management plan of nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification work for separate and integral effect experiments is required. In this reason, the goal of this work is to verify calculation capability of SPACE code for multiple failure accident. For this purpose, it was selected the experiment which was conducted to simulate a Multiple Steam Generator Tube Rupture(MSGTR) accident with Passive Auxiliary Feedwater System(PAFS) operation by Korea Atomic Energy Research Institute (KAERI) and focused that the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The MSGR accident has a unique feature of the penetration of the barrier between the Reactor Coolant System (RCS) and the secondary system resulting from multiple failure of steam generator U-tubes. The PAFS is one of the advanced safety features with passive cooling system to replace a conventional active auxiliary feedwater system. This system is passively capable of condensing steam generated in steam generator and feeding the condensed water to the steam generator by gravity. As the results of overall system transient response using SPACE code showed similar trends with the experimental results such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it could be concluded that the SPACE code has sufficient capability to simulate a MSGTR accident.