광경화성 단분자를 이용한 광학 보상 휨 액정 디스플레이의 전기광학 특성연구

Study on Electro-optic Characteristics of the Optically Compensated Bend Liquid Crystal Display Using UV Curable Monomer

  • 임영진 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 전은정 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 권동원 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 김정환 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 정광운 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 이명훈 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터) ;
  • 이승희 (전북대학교 고분자.나노공학과 고분자 BIN 융합연구센터)
  • Lim, Young-Jin (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Jeon, Eun-Jeong (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Kwon, Dong-Won (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Kim, Jeong-Hwan (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Jeong, Kwang-Un (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Lee, Myong-Hoon (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University) ;
  • Lee, Seung-Hee (Polymer BIN Fusion Research Center, Department of Polymer.Nano Science and Engineering, Chonbuk National University)
  • 발행 : 2009.09.25

초록

광학 보상 휨 액정디스플레이(OCB-LCD)는 빠른 응답속도와 광 시야각 특성 때문에 응용 분야가 많다. 하지만 OCB-LCD는 초기에 splay 상태로 배열되어 있고 계조 구동은 bend 상태에서 이루어지기 때문에 초기 splay 상태에서 bend 상태로의 빠른 전이가 필요하다. 기존에 순간적으로 고전압을 인가하는 방식과 달리 본 연구에서는 임계 전압과 광경화성 반응성 단량체의 고분자화를 통한 표면 선경사각 형성으로 초기 상태부터 bend 상태를 갖는 OCB-LCD를 제조하였다. 제조된 액정 셀의 전기 광학적 및 전기적 특성을 분석한 결과 본 연구에서 제조된 셀은 기존 OCB 셀에 비해 고 선경사각으로 인한 고속응답 특성을 보여주었고 액정 단량체에 의해 형성된 배향막 위의 고분자 층 형성에 따른 잔류 DC 값은 0.1 V 보다 적었다.

Optically compensated bend liquid crystal display (OCB-LCD) has many application fields owing to its fast response time and wide viewing angle. However, in order to operate the OCB-LCD in bend state, this device needs quick transitions from the initial splay state to bend state. Unlike conventional approach using transient high voltage for the transition, the OCB-LCD with high surface tilt angle, which was achieved by polymerization of UV curable reactive mesogen monomer under certain voltage, was manufactured and the cell showed bend state initially. Electro-optic and electrical characteristics of the cell were analyzed. The cell shows a fast response time owing to high surface pretilt angle and very low residual DC less than 0.1 V although another polymer layer is formed above polymer alignment layers.

키워드

참고문헌

  1. C. H. Choi, S. H. Kim, and B. K. Kim, Polymer(Korea), 18, 1035 (1994)
  2. M. S. Kim, H. K. Won, S. H. Song, M. H. Lee, and S. H. Lee, Polymer(Korea), 28, 298 (2004)
  3. M. Schadt and W. Helfrich, Appl. Phys. Lett., 18, 127 (1971) https://doi.org/10.1063/1.1653593
  4. S. H. Hwang, Y. J. Lim, M. -H. Lee, S. H. Lee, G. D. Lee, H. Kang, K. J. Kim, and H. C. Choi, Curr. Appl. Phys., 11, 690 (2007)
  5. M. Oh-e, M. Ohta, S. Aratani, and K. Kondo, Proc. of the 15th International Display Research Center, 577 (1995)
  6. H. H. H. Klausmann, S. Aratani, and K. Kondo, J. Appl. Phys., 83, 1854 (1998) https://doi.org/10.1063/1.366909
  7. E. Y. Oh, S. H. Baik, M. H. Sohn, K. D. Kim, H. J. Hong, J. Y. Bang, K. J. Kwon, M. H. Kim, H. Jang, J. K. Yoon, and I. J. Chung, J. SID, 13, 215 (2005) https://doi.org/10.1889/1.2012608
  8. A. Takeda, S. Kataoka, T. Sasaki, H. Chida, H. Tsuda, K. Ohmuro, Y. Koike, T. Sasabayashi, and K. Okamoto, Society for Information Display Int. Symp., 1077 (1998)
  9. H. L. Ong, N. Cheong, J. Lo, M. Metras, and O. Woodard, Society for Information Display Int. Symp., 680 (2003)
  10. K. Hanaoka, Y. Nakanishi, Y. Inoue, S. Tanuma, and Y. Koike, Society for Information Display Int. Symp., 1200 (2004)
  11. S. H. Lee, S. L. Lee, and H. Y. Kim, Appl. Phys. Lett., 73, 2881 (1998) https://doi.org/10.1063/1.122617
  12. J.-D. Noh, H. Y. Kim, J.-H. Kim, S.-H, Nam, and S. H. Lee, Jpn. J. Appl. Phys., 42, 1290 (2003) https://doi.org/10.1143/JJAP.42.1290
  13. M. S. Kim, Y. H. Jung, S. M. Seen, H. Y. Kim, S. Y. Kim, Y. J. Lim, and S. H. Lee, Jpn. J. Appl. Phys., 44, 3121 (2005) https://doi.org/10.1143/JJAP.44.3121
  14. P. J. Bos, P. A. Johnson, and K. R. Koehler- Beran, Society for Information Display Int. Symp., 30 (1983)
  15. M. J. Jung, C. G. Jhun, J. C. Kim, T. -H. Yoon, J. D. Hoh, D. H. Suh, and J. Y. Lee, Proc. of the 11th International Display Workshops, 121 (2004)
  16. T. -J. Chang and P. -L. Chen, Proc. of the 10th International Display Workshops, 77 (2003)
  17. C.-L. Kuo, T. Miyashita, M. Suzuki, and T. Uchida, Appl. Phys. Lett., 68, 1461 (1996) https://doi.org/10.1063/1.116254
  18. S. W. Kang, S. Sprunt, and L. C. Chien, Macromolecules, 35, 9372 (2002) https://doi.org/10.1021/ma020578o
  19. R. Hasegawa, Y. Kidzu, I. Amemiya, S. Uchikoga, and H. Wakemoto, Society for Information Display Int. Symp., 995 (2007)
  20. T. -J. Chen, C. C. Chen, J. J. Wu, and C. H. Sun, Jpn. J. Appl. Phys., 46, 4203 (2007) https://doi.org/10.1143/JJAP.46.4203
  21. S. G. Kim, S. M. Kim, Y. S. Kim, H. K. Lee, S. H. Lee, G.-D. Lee, J.-J. Lyu, and K. H. Kim, Appl. Phys. Lett., 90, 261910 (2007) https://doi.org/10.1063/1.2752105
  22. T.-J. Chen and K.-L. Chu, Appl. Phys. Lett., 92, 091102 (2008) https://doi.org/10.1063/1.2889495
  23. E. J. Jeon, S. S. Kim, Y. J. Lim. M. -H. Lee, and S. H. Lee, Proc. of 2008 Spring Symposium on Display and Optical Device, 49 (2008)
  24. S.-F. Hsu, W.-Y. Chien, K. -H. Wu, L. -Y. Yeh, M. -H. Wu, T. C. Lin, and J. -C. Tsai, Society for Information Display Int. Symp., 503 (2008)