• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.19-26
• /
• 2003

An oscillating digger mechanism was designed, constructed. and tested. The mechanism is consisted of a six-bar linkage, one four-bar linkage was fer the digger blade and the other one fur variable soil-crop separation. Experimental variables were amplitude(3, 6, 9 mm). frequency(11.2, 14.9. 17.0 Hz), and forward speed of tractor(0.91, 1.13, 1.56 km/h). Each combination of these variables was replicated three times to measure the draft and torque for power requirement evaluation. and the broken-up soil height on the soil separation sieve mechanism. Four parameters λ(the ratio of vibration speed to forward velocity), p(the ratio of vibration acceleration to forward velocity), K(the ratio of vibration acceleration to gravitational acceleration), and T(the product of λ and K) were induced from three experimental variables: amplitude, frequency, and tractor speed. And the power requirement and soil separation ability were analyzed by regression. Though λ and K were known to be the representative parameters. T was the most moderate one to explain draft. torque. and soil separation in this study. It was estimated that the T equal to or greater than 2.4 was the minimum recommended value. Figure 18 would be useful fir the selection of amplitude. frequency, or operating tractor speed once any two variables are known.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.841-851
• /
• 2013

Mobile RFID/NFC linkage technology means a provision of integrated 2 existing mobile RFID services by developing the 900MHz mobile RFID reader and the NFC reader/tag into one SoC to be put on a USIM card. In this paper, the mobile RFID related technologies that offer similar services as NFC were also analyzed to understand the potential linkage to NFC and the requirements for the linkage. In addition, the introduction of dual tag and the code system linkage suggested a linking method to maximally use the existing infrastructure and the requirement satisfaction was analyzed. Lastly, based on the analysis, the future direction for the new standard design was suggested.

• Journal of Computing Science and Engineering
• /
• v.5 no.3
• /
• pp.223-235
• /
• 2011

Performing approximate data matching has always been an intriguing problem for both industry and academia. This task becomes even more challenging when the requirement of data privacy rises. In this paper, we propose a novel technique to address the problem of efficient privacy-preserving approximate record linkage. The secure framework we propose consists of two basic components. First, we utilize a secure blocking component based on phonetic algorithms statistically enhanced to improve security. Second, we use a secure matching component where actual approximate matching is performed using a novel private approach of the Levenshtein Distance algorithm. Our goal is to combine the speed of private blocking with the increased accuracy of approximate secure matching.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.464-466
• /
• 2014

The mechanism synthesis methods, graphical, analytical and computer-aided technique have been proposed for selecting and scaling mechanical system. According to developing computation tools, mechanism could be synthesized much faster and more correct than previous analytical ways by improved techniques. In this paper, the improved synthesis method is proposed to solve body guidance synthesis problem. To perform the mechanism synthesis for body guidance, a planar linkage is modeled as a set of free three bushings located in design space. The values of bushing stiffness and x, y position of bushings yielding a desired functional requirement related to input motion are found by using an optimization technique.

• Journal of Korean Society on Water Environment
• /
• v.35 no.1
• /
• pp.35-42
• /
• 2019

Urbanization has led to extreme changes in land use on urban watersheds. Most cities are becoming residential, commercial and industrial areas, making infiltration and storage of rainfall less favorable. The demand for LID (Low Impact Development) technology is increasing in order to mitigate this water cycle distortion and return to existing hydrological conditions. The LID technique is effective in reducing runoff by permeating the urban impervious area. However, considering the limit of the installation area and the financial requirement of the installation, there is not much research on the linkage of each LID component technology for optimum efficiency according to the appropriate scale. In this study, the effects of the LID facilities applied to the target site were simulated using the SWMM model, suggesting the optimal linkage method considering interconnectivity, and applying the effects as an existing installation of individual facilities. The water balance at the time of application of the LID technology, short-term and long-term rainfall event were compared. Also, the individual application and the linkage application were compared with each other. If each component technology has sufficient processing size, then linkage application is more effective than individual application.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.794-796
• /
• 2004

In the evaluation of performance for the algorithm of sensorless speed control, the ability of speed control in low speed range and starting is important points. First of all, stability of low speed control is highly required in the application which needs high performance in speed control. For this requirement, this paper represents simple method to estimate the rotor position by comparing reference linkage flux with it's estimation. In the estimation of linkage flux, this paper uses voltage-current model for increasing the performance of speed control in low speed range.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.491-503
• /
• 2008

As customer needs become diversified, there are many efforts to develop creative ideas on the products to satisfy the customer requirement. Also it is very important to classify the customer requirement to the product's quality. According to the previous study, the idea of the products by collecting opinions and brainstorming is mainly studied in new product development. To create the attractive quality for the product, Kano model has commonly been used. However, the brainstorming in the stage of create ideas has the problem of lower linkage between purpose and idea and lower quality of new idea. Therefore, the paper suggests a way to invent more creative ideas by comparing forced connection method to the brainstorming that is applied to the Kano model.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2002.03b
• /
• pp.153-159
• /
• 2002

This study mainly concentrates on the development of a land information management system to manage the land related information in an effective way for the water-pollutant buffering zone, which was established to sustain better quality of the drinking water over the upper part of the Han river. For developing such system, a procedure was implemented covering user requirement analysis, system design, spatial DB design, and coding. DB linkage with affiliated institutes and cadastral DB updating were proposed as the part of the efforts to enhance the applicability of the system. In addition to that, modularization was adopted for more efficient and cost-effective system development.

• Journal of the Korea Society for Simulation
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2015

In this paper, the multi-resolution simulation of standard linkage architecture is consists of the engineering-level (QUEST), engagement-level (SADM), the mission-level (EADSIM). It was developed the engineering-level model using battle experiment integrated development environment in the battle experimental engineering system. The engagement level model was developed using the SADM and the mission-level model was developed using EADSIM. The standard linkage architecture is designed and implemented in order to interlocking model of multiple layers. Each different simulation programs in a distributed environment was designed by HLA interface specifications for satisfying interworking. Also the integrated interoperation gateway was developed for relaying the each different simulation programs. The effective naval weapon system for measure of effectiveness develops using to improve the fidelity of the model between the various layers through multi-resolution interoperation simulation. According to the operator requirement is quickly battlefield environment can be constructed. The other simulation program that being designed through standards linkage architecture can linkage easily and efficiently.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.489-499
• /
• 2010

The securing of raw material is an important requirement for economic development. Many countries, including Korea, actively seek out a stable supply of minerals such as manganese. Manganese nodules are rock concretions on the sea bottom formed of concentric layers of iron and manganese hydroxides around a core and include several strategic minerals necessary for economic development. In particular, the manganese nodule development project (MNDP) plays an important role in the Korean national economy. This study attempts to apply input-output (I-O) analysis in investigating the economic impacts of the MNDP in the Korean national economy. A static I-O framework was employed, focusing on four topics in its application; the production-inducing impacts, the value-added-inducing impacts, the employment-inducing impacts and R&D-inducing impacts of MNDP investments on other sectors. To this end, several versions of the demand-driven models are utilized. In addition, inter-industry linkage analysis is performed to obtain information on the forward and backward linkage effects of industries, including MNDP, to quantify the strength of causation among these industries.