• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.19-26
• /
• 2003

An oscillating digger mechanism was designed, constructed. and tested. The mechanism is consisted of a six-bar linkage, one four-bar linkage was fer the digger blade and the other one fur variable soil-crop separation. Experimental variables were amplitude(3, 6, 9 mm). frequency(11.2, 14.9. 17.0 Hz), and forward speed of tractor(0.91, 1.13, 1.56 km/h). Each combination of these variables was replicated three times to measure the draft and torque for power requirement evaluation. and the broken-up soil height on the soil separation sieve mechanism. Four parameters λ(the ratio of vibration speed to forward velocity), p(the ratio of vibration acceleration to forward velocity), K(the ratio of vibration acceleration to gravitational acceleration), and T(the product of λ and K) were induced from three experimental variables: amplitude, frequency, and tractor speed. And the power requirement and soil separation ability were analyzed by regression. Though λ and K were known to be the representative parameters. T was the most moderate one to explain draft. torque. and soil separation in this study. It was estimated that the T equal to or greater than 2.4 was the minimum recommended value. Figure 18 would be useful fir the selection of amplitude. frequency, or operating tractor speed once any two variables are known.

• 한국통신학회논문지
• /
• 제38C권10호
• /
• pp.841-851
• /
• 2013

모바일 RFID/NFC 연동기술이란, 900 MHz 기반의 모바일 RFID 리더와 NFC 리더/태그를 하나의 SoC로 개발하여 USIM 카드에 탑재함으로써 현존하는 2가지 모바일 RFID 서비스를 통합 제공하기 위한 기술을 의미한다. 본 논문에서는 NFC기술과 유사한 서비스를 제공하는 모바일 RFID 기술과 관련 표준을 분석하여 NFC 기술과의 연동 가능성을 파악하고 연동 시 필수적으로 고려되어야 할 연동 요구사항을 도출하였다. 또한 듀얼태그의 도입과 코드체계의 연동을 통해 기존의 인프라를 최대한 활용할 수 있는 연동방안을 제안하였고 연동방안의 연동 요구사항 만족 여부를 분석하였다. 마지막으로 분석된 내용을 바탕으로 서비스 연동 환경 구축에 필요한 새로운 표준 설계의 방향성을 제시하였다.

• Journal of Computing Science and Engineering
• /
• 제5권3호
• /
• pp.223-235
• /
• 2011

Performing approximate data matching has always been an intriguing problem for both industry and academia. This task becomes even more challenging when the requirement of data privacy rises. In this paper, we propose a novel technique to address the problem of efficient privacy-preserving approximate record linkage. The secure framework we propose consists of two basic components. First, we utilize a secure blocking component based on phonetic algorithms statistically enhanced to improve security. Second, we use a secure matching component where actual approximate matching is performed using a novel private approach of the Levenshtein Distance algorithm. Our goal is to combine the speed of private blocking with the increased accuracy of approximate secure matching.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.464-466
• /
• 2014

The mechanism synthesis methods, graphical, analytical and computer-aided technique have been proposed for selecting and scaling mechanical system. According to developing computation tools, mechanism could be synthesized much faster and more correct than previous analytical ways by improved techniques. In this paper, the improved synthesis method is proposed to solve body guidance synthesis problem. To perform the mechanism synthesis for body guidance, a planar linkage is modeled as a set of free three bushings located in design space. The values of bushing stiffness and x, y position of bushings yielding a desired functional requirement related to input motion are found by using an optimization technique.

• 한국물환경학회지
• /
• 제35권1호
• /
• pp.35-42
• /
• 2019

Urbanization has led to extreme changes in land use on urban watersheds. Most cities are becoming residential, commercial and industrial areas, making infiltration and storage of rainfall less favorable. The demand for LID (Low Impact Development) technology is increasing in order to mitigate this water cycle distortion and return to existing hydrological conditions. The LID technique is effective in reducing runoff by permeating the urban impervious area. However, considering the limit of the installation area and the financial requirement of the installation, there is not much research on the linkage of each LID component technology for optimum efficiency according to the appropriate scale. In this study, the effects of the LID facilities applied to the target site were simulated using the SWMM model, suggesting the optimal linkage method considering interconnectivity, and applying the effects as an existing installation of individual facilities. The water balance at the time of application of the LID technology, short-term and long-term rainfall event were compared. Also, the individual application and the linkage application were compared with each other. If each component technology has sufficient processing size, then linkage application is more effective than individual application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.794-796
• /
• 2004

In the evaluation of performance for the algorithm of sensorless speed control, the ability of speed control in low speed range and starting is important points. First of all, stability of low speed control is highly required in the application which needs high performance in speed control. For this requirement, this paper represents simple method to estimate the rotor position by comparing reference linkage flux with it's estimation. In the estimation of linkage flux, this paper uses voltage-current model for increasing the performance of speed control in low speed range.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.491-503
• /
• 2008

As customer needs become diversified, there are many efforts to develop creative ideas on the products to satisfy the customer requirement. Also it is very important to classify the customer requirement to the product's quality. According to the previous study, the idea of the products by collecting opinions and brainstorming is mainly studied in new product development. To create the attractive quality for the product, Kano model has commonly been used. However, the brainstorming in the stage of create ideas has the problem of lower linkage between purpose and idea and lower quality of new idea. Therefore, the paper suggests a way to invent more creative ideas by comparing forced connection method to the brainstorming that is applied to the Kano model.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2002년도 춘계학술대회논문집
• /
• pp.153-159
• /
• 2002

This study mainly concentrates on the development of a land information management system to manage the land related information in an effective way for the water-pollutant buffering zone, which was established to sustain better quality of the drinking water over the upper part of the Han river. For developing such system, a procedure was implemented covering user requirement analysis, system design, spatial DB design, and coding. DB linkage with affiliated institutes and cadastral DB updating were proposed as the part of the efforts to enhance the applicability of the system. In addition to that, modularization was adopted for more efficient and cost-effective system development.

• 한국시뮬레이션학회논문지
• /
• 제24권1호
• /
• pp.9-16
• /
• 2015

본 논문에서는 표준연동 아키텍처(HLA/RTI)기반 다해상도 연동이 가능한 시뮬레이션을 구성하여 공학급(QUEST), 교전급(SADM), 임무급(EADSIM)의 모델을 연동하였다. 공학급 모델은 전투실험 공학분석 시범체계에서 개발된 전투실험 통합개발환경(QUEST)을 이용하여 모델을 개발하였다. 교전급 모델은 SADM을 이용하여 개발하고 임무급 모델은 EADSIM을 이용하여 모델을 개발하였다. 여러 계층의 모델을 연동하기 위해 표준 연동 아키텍처 기반(HLA/RTI)으로 설계하고 구현하였다. 각기 다른 분산된 환경에서 수행되고 있는 시뮬레이션 프로그램들이 상호 연동을 위해 표준 연동 인터페이스 명세에 만족하는 연동 시뮬레이션을 설계하고 각 시뮬레이션 프로그램 간의 중계 역할을 담당하는 통합연동 게이트웨이를 개발하였다. 다해상도 연동 시뮬레이션을 통해 여러 계층 간의 모델을 연동하여 해양 무기체계 효과도 분석을 위한 모델충실도를 향상하고 운용자 필요에 따라 요구되는 전장 환경을 신속하게 구성할 수 있다. 또한 표준연동 아키텍처(HLA/RTI)를 기반으로 설계하게 된 다른 시뮬레이션 프로그램과도 쉽고 효율적으로 연동할 수 있다.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.489-499
• /
• 2010

The securing of raw material is an important requirement for economic development. Many countries, including Korea, actively seek out a stable supply of minerals such as manganese. Manganese nodules are rock concretions on the sea bottom formed of concentric layers of iron and manganese hydroxides around a core and include several strategic minerals necessary for economic development. In particular, the manganese nodule development project (MNDP) plays an important role in the Korean national economy. This study attempts to apply input-output (I-O) analysis in investigating the economic impacts of the MNDP in the Korean national economy. A static I-O framework was employed, focusing on four topics in its application; the production-inducing impacts, the value-added-inducing impacts, the employment-inducing impacts and R&D-inducing impacts of MNDP investments on other sectors. To this end, several versions of the demand-driven models are utilized. In addition, inter-industry linkage analysis is performed to obtain information on the forward and backward linkage effects of industries, including MNDP, to quantify the strength of causation among these industries.