• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1528-1538
• /
• 2018

In this paper, configuration of $1-{\phi}$ seven-level boost DC-link cascade based reversing voltage multilevel inverter (BDCLCRV MLI) is proposed for uninterrupted power supply (UPS) applications. It consists of three level boost converter, level generation unit and full bridge circuit for polarity generation. When compared with conventional boost cascaded H-bridge MLI configurations, the proposed system results in reduction of DC sources, reduced power switches and gate drive requirements. Inverter switching is accomplished by providing appropriate switching angles that is generated by any optimization switching angle techniques. Here, round modulation control (RMC) method is taken as the optimization method and switching angles are derived and the same is compared with various switching angles methods i.e., equal-phase (EP) method, and half-equal-phase (HEP) method which results in improved quality of obtained AC power with lowest total harmonic distortion (THD). Reduction in DC sources and switch count makes the system more cost effective. A simulation and prototype model of $1-{\phi}$ seven-level BDCLCRV MLI system is developed and its performance is analyzed for various operating conditions.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.895-903
• /
• 2012

This paper presents a fast switching direct torque control (FS-DTC) using only a single DC-link current sensor. In FS-DTC, six new active voltage complex space vectors (CSVs) are synthesized by the conventional active voltage space vectors (SVs). The corresponding sectors are rotated in the anticlockwise direction by 30 degrees. A selection table is defined to select the CSVs. Based on the "Different Phase Mode", the output sequence of the selected CSV is optimized. Accordingly, a reconstruction method is proposed to acquire the phase currents. The core of the FS-DTC is that all of the three phase currents can be reliably reconstructed during every two sampling periods, which is the result of the fast switching between different phases. The errors between the reconstructed and actual currents are strictly limited in one sampling period. The FS-DTC has the advantages of the standard DTC scheme such as simple structure, quick torque response and robustness. As can be seen in the analysis, the FS-DTC can be thought of as an equivalent standard DTC scheme with 86.6% of the maximum speed, 173.2% of the torque ripple, and 115% of the response time of the torque. Based on a dSPACE DS1103 controller, the FS-DTC is implemented in an induction machine drive system. The results verify the effectiveness of the FS-DTC.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.56-64
• /
• 2007

Recently, the high frequency link boost DC/DC converter has been used widely for PCS (Power Conditioning System) because of the requirements of small size and low cost. However, the high frequency link boost DC/DC converters applied the conventional voltage-fed converter and current-fed converter have some problems like high conduction losses and high surge voltage due to high circulating current and leakage inductance, respectively. To improve these problems, a novel secondary LLC (called SLLC) series resonant converter is proposed in this paper and its theoretical analysis, its operating waveforms, simulation and experimental results for a boost DC/DC converter using SLLC series resonant topology verifies the proposed topology. 800W experimental prototype is tested.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.113-121
• /
• 2013

In this paper, we design and implement a network weather map system, which provides a macroscopic view on the whole network topology as well as the network link status and utilization. The proposed system also provides distributed NetFlow-based database facility and Web-based query interface, through which network operators can check the detailed network router or link status as well as submit predefined queries to easily find out and locate heavy hitters and/or their usage. We believe that our develop system will be a useful tool for small-to-mid-scale ISPs or network operators, in managing their own networks in a cost-effective way.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.2
• /
• pp.81-92
• /
• 2019

When Photovoltaic inverter is connected to grid and used as PVPCS (Photovoltaic Power Conditioning System), 120 Hz AC ripple occurs at the dc-link capacitor voltage. This AC ripple reduces the efficiency of PVPCS and shortens the lifetime of the capacitor. In this paper, we design a notch filter to remove AC ripple. As a result, the AC voltage ripple was removed from the dc link and the THD of the PVPCS output current with the notch filter was lowered. This notch filter is determined by the damping coefficient, the bandwidth coefficient, and the switching frequency. Among these, the switching frequency determines the switching loss and the size of the LC filter, and the PVPCS with the high switching frequency has a greater efficiency loss due to the switching loss than the efficiency improvement by the notch filter. Therefore, it is important to set the optimum switching frequency in the PVPCS with the notch filter applied. In this paper, THD and switching loss of PVPCS output current with notch filter are calculated through simulation, and cost function to calculate optimum switching frequency through data is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.838-839
• /
• 2016

IEEE 802.15.4 is the standard wireless link technology for low power, low cost, but long lifetime applications including wireless sensor network (WSN). Currently, whether or not IP architecture should be used in WSN over its 802.15.4 link is under dispute. Such kind of arguments may last for a long time without some convincing experimental measurements of real case performances of IP over 802.15.4 implementation, and thus prevent the advance of related research. In RFC4944, IETF proposed the 6LoWPAN specification to enable IPv6 communication over low power, wireless personal area networks. We try to alleviate the dispute and make the direction clearer to the community so as to promote further valuable research in this topic.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.3163-3181
• /
• 2023

Eavesdropping attacks have seriously threatened network security. Attackers could eavesdrop on target nodes and link to steal confidential data. In the traditional network architecture, the static routing path and the important nodes determined by the nature of network topology provide a great convenience for eavesdropping attacks. To resist monitoring attacks, this paper proposes a random routing mutation defense method based on dynamic path weight (DPW-RRM). It utilizes network centrality indicators to determine important nodes in the network topology and reduces the probability of important nodes in path selection, thereby distributing traffic to multiple communication paths, achieving the purpose of increasing the difficulty and cost of eavesdropping attacks. In addition, it dynamically adjusts the weight of the routing path through network state constraints to avoid link congestion and improve the availability of routing mutation. Experimental data shows that DPW-RRM could not only guarantee the normal algorithmic overhead, communication delay, and CPU load of the network, but also effectively resist eavesdropping attacks.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.161-170
• /
• 2007

The purpose of this study is to find the solution that overcomes the existing assumption of symmetric cost functions in multi-class assignment. In the assignment problem, the assumption of a symmetric cost function means that the link cost is determined by each unique mode and is not affected by any other modes. In this study, the authors have applied a diagonalized algorithm and a heuristic model based on column generation to a multi-class assignment model and analyzed the result. Through the study, the authors found that the diagonalized algorithm produces equilibrium solutions by the initial convergence condition. In contrast to the diagonalized algorithm, the column generation algorithm has improved the solution model to overcome the problem of equilibrium solutions in the diagonalized algorithm.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.175-184
• /
• 2008

For deciding the profitability and feasibility of the construction project, the schematic estimation has to not only link the design decision-making but also estimate the cost with reliability. The prototype-based schematic estimation system was developed for easily linking with design-making and supports to evaluate the design alternatives in the design development stage but didn't consider the cost estimated by parameter and additional work items by users. This research presents the object-parameter based schematic estimation model in the design development stage that can lead to accurately estimate the cost by using historical data from the high-storied office buildings. For the development of the proposed model for schematic estimation, after analyzing and classifying the work items from the Bills of Quantities(BOQs) and drawings of historical data, this research proposed the methods of estimating cost in accordance with attributes of each work item. In addition, a case study is performed for the effectiveness as comparing the previous estimating method with the proposed model.

• Asia pacific journal of information systems
• /
• v.12 no.3
• /
• pp.213-233
• /
• 2002

Recently, a lot of companies intend to make spin-offs as the Internet usage is proliferating in the business area. A spin-off means a small but autonomous company which is thought to show higher profitability rather than it stays under the influence of a mother enterprise. To prove our hypotheses, we collected questionnaire data from 104 companies considering spin-offs. From experiments with Factor Analysis, we found that there exist four factors which decision-makers should consider before deciding spin-offs such as competence of unit, competence of mother company, competence of spin-off company, and support of mother company. After massive experiments with Regression Analysis we also found that there are significant three performance factors such as competence of unit, competence of spin-off company, and support of mother company. The survey also asked about three potential strategies that they may have been following for achieving business objectives: Cost leadership, Focus, and Differentiation, Six benefits factors emerged from this study: External competitiveness, Internal competency, Productivity, Change, Cost saving, and Improvement. External competitiveness was the most important benefit, and it predicted a Differentiation and Focus strategy. Productivity and Improvement also predicted a Differentiation strategy. External competitiveness, Change, and Cost saving predicted a Cost leadership strategy. However, organizations followed Differentiation and Focus strategies significantly more than Cost leadership. The assessment thus sheds light on the link between information strategy and spin off. We hope that based on our results, many companies considering a spin-off can make a right decision and expect higher performance in a turbulent business environment.