• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권1호
• /
• pp.30-39
• /
• 2007

기존의 내용기반 스팸메일 분류는 전자메일이 이미지를 많이 가지고 있고 텍스트는 적게 가지고 있을 경우에는 내용을 분석하기 어려우므로 스팸메일을 분류하는 데 한계가 있다. 이와 같은 문제를 해결하기 위하여 본 논문에서는 전자메일의 구조를 분석하는 링크구조분석 스팸메일 분류 알고리즘을 제안한다. 이것은 전자메일 안의 하이퍼링크의 개수와 하이퍼링크가 가리키는 웹 문서들이 다른 웹 문서에 의해 링크된 수를 측정하여 전자메일의 중요도를 계산한 후 의사결정트리를 학습하여 스팸메일과 정상메일을 분류한다. 또한 위의 링크구조분석 알고리즘과 하이퍼링크의 서버 주소만을 이용한 변형된 링크구조 분석 알고리즘, 그리고 SVM(support vector machine)을 이용한 내용기반 방법을 다수결 원칙으로 결합한 통합 스팸메일 분류 시스템을 제안한다. 실험 결과, 제안한 링크구조분석 알고리즘은 기존의 내용기반 방법 보다 스팸메일 분류 정확도가 94.8%로 약간 향상되었으며 또한 통합 스팸메일 분류 시스템도 내용기반 방법과 비교하여 향상된 97.7%를 나타냈다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.226-233
• /
• 1999

When we numerically model the bridge under seismic condition, the full model combining the super-structure and the sub-structure is considered for the more accurate results than the separate model. In this case, the super-structure is connected with the sub-structure by the elastic pad shoe that is difficult to model, because it has the three translational elastic stiffness and the three rotational elastic stiffness. The two-node General Link element is derived in finite element equation representing such a pad shoe, and it is verified by comparing the one General Link element model with the corresponding three legacy spring element model. It is easy to model the pad shoe, if the General Link finite element is used. And the seismic analysis result of the bridge full model structure, which is modeled with the General Link element, has been compared with the one of the separate model structure. The present study gives. more conservative result than that of the separate model, which does not consider the dynamic behaviour of the sub-structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1299-1303
• /
• 2005

Over the last decade the research of end-to-end behavior on computer network has grown by orders but it has few researching in hop-by-hop behavior. We think if we know hop-by-hop behavior it can make better understanding in network behavior. This paper represent ICMP time stamp request and time stamp reply as tool of network study for learning in hop-by-hop behavior to estimate link bandwidth and link structure. We describe our idea, experiment tools, experiment environment, result and analysis, and our discussion in our observative.

• 한국경영과학회지
• /
• 제30권2호
• /
• pp.1-11
• /
• 2005

The network structures of a hyperlinked environment can be a rich source of information about the contents of the environment and it provides effective means for understanding it. Recently, there have been a number of algorithms proposed analyzing hypertext link structure so as to determine the best authorities for a given topic or query. In this paper, we review the algorithm of mutual reinforcement relationship for finding hubs and authorities from World Wide Web, and suggest SHA, a new approach for link-structure analysis, which uses the relationships among a set of relative authoritative pages, a set of hub pages, and a set of super hub pages.

• 한국전자통신학회논문지
• /
• 제16권6호
• /
• pp.1045-1052
• /
• 2021

현대전은 감시체계, 지휘통제체계, 타격체계가 첨단 정보통신기술로 상호 연결되어 전장상황을 공유하는 네트워크 중심전(NCW: Network Centric Warfare)으로 변화해 가고 있다. 한국군은 각 군의 전장상황에 맞게 Link-K, Link-16, Link-11, KVMF 등 다양한 전술데이터링크(TDL: Tactical Data Link)를 활용하고 있다. 한국형 합동 전술데이터링크체계(JTDLS : Joint Tactical Data Link System)는 지상/해상/공중 합동전력간 근실 시간으로 전술정보를 공유하는 체계로 Link-K, Link-16, KVMF에 Link-22를 추가 개발하고 있다. 본 논문에서는 JTDLS체계에 Link-22를 적용하기 위하여 체계 구성, Link-22 메시지 분석 및 전술 데이터 링크 처리기와 Link-22의 연동 구조를 제시하고자 한다.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.60-68
• /
• 1998

Parallel link manipulators have an ability of more precise positioning than serial open-loop manipulators. However. general parallel link manipulators have been restricted to the real applications since they have limited workspace due to interference among actuators. In this study, we suggest a closed-loop manipulator with 6 degrees-of-freedom and with enlarged workspace. It consists of two parts for minimizing the interference among actuators. One part is lower structure with planar 3 degrees-of-freedom and the other is upper one with spatial 3 degrees-of-freedom. Forward kinematics and inverse kinematics are solved, research about singularity points are carried out and workspace is evaluated. The comparison of workspace between Stewart platform, which is the typical parallel link manipulator, and the suggested manipulator shows that the workspace of the latter is wider than that of the former. Especially, simulation results also show that the suggested manipulator is more suitable when there needs rotation in the end-effector.

• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.145-157
• /
• 2013

Based on link-model, we conducted a static analysis and computation of a three-span suspended cable structure in the present paper, and obtained the static configuration and tension distribution of the cable. Using the link and beam model based on finite element method, we analyzed the vibration modal of three-span suspended cable structure, and compared with the results obtained from ANSYS using link and beam element. The vibration modals of shallow sagging inclined cables calculated from proposed method agrees well with ANSYS results, which validates the proposed method. As a result, the influence of bend stiffness on in-plane natural frequencies is much greater than that on out-of-plane natural frequencies of inclined cables.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.789-796
• /
• 2013

Next Generation Weapon system from the center of the platform to share information in real-time Network Centric Warfare(NCW: Network Centric Warfare) has been changed. Data link system is defined as a network. That is, all in real-time battlefield information is to enable sharing. Data link system is classified as a precision strike, Monitoring/control, control of a Patriot missile battery systems. These systems are most effective in a Joint warfare and precision strike. Data Link Systems(Data Communications) implementation is accomplished by using the KDLM(Korean Data Link Modem) and Radio Transceiver. KDLM is operated in conjunction with the legacy Radios(re-using fielded HF/VHF/UHF radio systems). In this paper, we describe in terms of KDLM system design. In this paper, the proposed design structure is how to effectively interact with legacy various radio. First, The results provide an analysis of that Dynamic TDMA system and apply modem structure. Radio characteristics data are necessary for an effective TDMA system design. This article analyzes the test results and describes the structure to improve the receive performance.

• 대한전자공학회논문지SD
• /
• 제42권6호
• /
• pp.17-22
• /
• 2005

유무기 하이브리드 SiOC 박막은 차세대 유력한 저유전상수를 갖는 박막이다. SiOC 박막의 결합구조는 FTIR 분석기를 이용하여 화학적 이동이 일어나는 것을 확인하여 분석하였다. 유기화학분야에서의 일반적인 화학적 이동은 red shift에 해당하지만, 하이브리드 타입의 SiOC 박막은 red shift 뿐만 아니라 특이한 경우에 해당하는 blue shift도 관찰되었다. 화학적 이동의 원인은 전기음성도가 큰 원소가 주변에 존재하는 수소결합사이의 상호작용 때문인데, SiOC 박막에서 blue shift는 전자를 많이 포함하는 메틸그룹이 증가함으로 생기는 기공을 만드는 원인을 제공한다. SiOC 박막의 결합구조 역시 2가지 유형의 화학적 이동에 따라서 cross-link 구조와 case-link 구조의 두 가지 유형으로 나타난다. 유량비와 증착할 때 주어지는 열에너지에 따라서 두 가지 결합구조를 나타낸다. cross-link 구조와 cross-link breakage 구조는 박막의 유전상수가 낮아지는 원인 서로 다르며 화학적 물리적인 특성 또한 다르게 나타나는 것을 증명하고 있다. Si-O-C cross-link 구조는 red shift의 원인이 된 수소결합에 의한 원자사이의 길이가 길어지는 효과에 의해 표면접착력이 개선되며, 유전상수 역시 감소하였다.

• Steel and Composite Structures
• /
• 제20권1호
• /
• pp.107-125
• /
• 2016

Steel shear wall system has been used in recent years in tall buildings due to its appropriate behavior advantages such as stiffness, high strength, economic feasibility and high energy absorption capability. Coupled steel plate shear walls consist of two steel shear walls that are connected to each other by steel link beam at each floor level. In this article the frames of 3, 10, and 15 of (C-SPSW) floor with rigid connection were considered in three different lengths of 1.25, 2.5 and 3.75 meters and link beams with plastic section modulus of 100% to the panel beam at each floor level and analyzed using three pairs of accelerograms based on nonlinear dynamic analysis through ABAQUS software and then the performance of walls and link beams at base shear, drift, the period of structure, degree of coupling (DC) and dissipated energy evaluated. The results show that the (C-SPSW) system base shear increases with a decrease in the link beam length, and the drift, main period and dissipated energy of structure decreases. Also the link beam length has different effects on parameters of coupling degrees.