• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.517-520
• /
• 2004

Organosilicate films are promising porous low-dielectric materials, which can replace the silicon dioxide films. It was researched that organosilicate films have two different chemical shifts according to the increase of the flow rate ratio. There are the red shift due to the electron deficient substitution group, and the blue shift of the electron rich substitution group. Among these chemical shifts, the blue shift from $1000 cm^{-1}$ to $1250 cm^{-1}$ was related with the formation of pores. The methyl radicals of the electron-rich substitution group terminate easily the Si-O-Si cross-link, and the Si-O-C cage-link near $1057 cm^{-1}$ is originated from the cross-link breakdown due to much methyl radicals.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.83-93
• /
• 2002

To improve the performance of estimation, the research that uses additional information addition to traffic count and target OD with additional survey cost have been studied. The purpose of this paper is to improve the performance of OD estimation by reducing the feasible solutions with cost-efficiently additional information addition to traffic counts and target OD. For this purpose, we Propose the OD estimation method with sample link use proportion as additional information. That is, we obtain the relationship between OD trip and link flow from sample link use proportion that is high reliable information with roadside survey, not from the traffic assignment of target OD. Therefore, this paper proposes OD estimation algorithm in which the conservation of link flow rule under the path-based non-equilibrium traffic assignment concept. Numerical result with test network shows that it is possible to improve the performance of OD estimation where the precision of additional data is low, since sample link use Proportion represented the information showing the relationship between OD trip and link flow. And this method shows the robust performance of estimation where traffic count or OD trip be changed, since this method did not largely affected by the error of target OD and the one of traffic count. In addition to, we also propose that we must set the level of data precision by considering the level of other information precision, because "precision problem between information" is generated when we use additional information like sample link use proportion etc. And we Propose that the method using traffic count as basic information must obtain the link flow to certain level in order to high the applicability of additional information. Finally, we propose that additional information on link have a optimal counting location problem. Expecially by Precision of information side it is possible that optimal survey location problem of sample link use proportion have a much impact on the performance of OD estimation rather than optimal counting location problem of link flow.

• Knowledge Management Research
• /
• v.7 no.2
• /
• pp.13-34
• /
• 2006

This paper is an exploratory study to analyze the flow of knowledge in science and technology in order to predict technology innovation. Here, we need to look into the characteristics of how knowledge is created in science, technology and industry to start with. Based on the characteristics we find, we have to understand the relationships between science, technology and industry, and construct a model to link them to each other for future empirical studies. In this study, we take a general view of the existing study results and theoretical models on the characteristics and linkage of scientific and technological knowledge. Moreover, we examine the preliminary framework to link science to technology to industry for further study on the knowledge flow of science and technology. Finally, we present the direction for future study by using the examined models and framework.

• Proceedings of the KOR-KST Conference
• /
• 2002.02a
• /
• pp.97-139
• /
• 2002

The aim of the present study is to find a good quality user equilibrium assignments under time varying condition. For this purpose, this study introduces a dynamic network loading method that can maintain correct flow propagation as well as flow conservation, and it develops a novel solution algorithm that does not need evaluation of the objective function by modifying the Schittenhelm (1990)'s algorithm. This novel algorithm turns out to be efficient and convenient compared to the conventional Frank-Wolfe (1956) algorithm because the former finds solutions based on routes rather than links so that it can maintain correct flow propagation intrinsically in the time-varying network conditions. The application of dynamic user equilibrium (DUE) assignment model with this novel solution algorithm to test networks including medium-sized one shows that the present DUE assignment model gives rise to high quality discrete time solutions when we adopt the deterministic queuing model for a link performance function, and we associate flows and costs in a proper way.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.235-245
• /
• 2005

In this paper, a simplified QoS model of MPLS-based backbone network. Conventional scheme proposed by IETF(IETF schem) is to embed a DiffServ model in MPLS network. However, this approach results in overall upgrade of MPLS system and so it is difficult to deploy this approach. Our proposed model, however, uses a Vidual Link which is a set of Label Switched Path(LSP) connected from an Ingress Label Edge Router(LER) to an Egress LER. In this model, Per-Hop-Behavior(PHB) is implemented only at each LSP in ingress LER and Core Label Switch Routers(LSRs) just guarantee each LSP's bandwidth, not service. This bandwidth guarantee service is fully provided by legacy MPLS model. Also we propose flow allocation mechanism and the flow distribution among LSPs of the virtual link by the flow according to the network status. To evaluate the simplified approach, the characteristics of the approach are compared logically with these of IETF's one through simulations.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.346-349
• /
• 2004

The design of DC-DC converters for power electronic interfaces in power management systems for Hybrid Electric Vehicle (HEV) is a very challenging task. In this paper, the considered topology is the hi-directional buck-boost converter and inverter system. If we make the converter side DC link current the same as the inverter side DC link current in a converter-inverter system, no current will flow through the BC link capacitor and as a result, no DC link voltage variation occurs. This leads to the possibility of reducing small th size of DC link capacitors which are expensive, bulky. Therefore we propose the converter current controller which can manage to match inverter and converter current at the DC link.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.10
• /
• pp.544-554
• /
• 1999

Multi-level inverters are now receiving widespread interest form the industrial drives for high power variable speed applications. Especially, for the high power variable speed applications, a diode clamped multi-level inverter has been widely used. However, it has the inherent problem that the voltage of the link capacitors fluctuates. This paper describes a voltage control scheme effectively to suppress the DC-link potential fluctuation for a diode clamped four-level inverter. The current to flow from/into the each link capacitor is analyzed and the operation limit is obtained when a conventional SVPWM is used. To overcome the operation limit, a modified carrier-based SVPWM is proposed. Various simulation and experiment results are presented to verify the proposed voltage control scheme for DC-link voltage balancing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.774-779
• /
• 2012

We design and implement a RTT (Round Trip Time) based TCP (Transmission Control Protocol) for USN (Ubiquitous Sensor Network). We adopt a basic update algorithm for window size from FAST TCP that uses the queuing delay at link as the congestion measure. The designed TCP estimates the queuing delay at link from the measured RTT in the network layer, and updates the window size based on the estimated queuing delay. The designed TCP allows to utilize the full capacity of USN links and avoids the waste of the given link capacity that is common without the flow control in the transport layer. The experiment results show that the window size of the sender converges within a small range of variations without any packet loss, and verify the stability and performance of the designed TCP.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2014

PURPOSES: Used in transportation planning and traffic engineering, almost traffic simulation tools have input variable values optimized by overseas traffic flow attribution because they are almost developed in overseas country. Thus, model calibration appropriated for internal traffic flow attribution is needed to improve reliability of simulation method. METHODS : In this study, the traffic flow model calibration is based on expressways. For model calibration, it needs to define each expressway link according to attribution, thus it is classified by design speed, geometric conditions and number of lanes. And modified greenshield model is used as traffic flow model. RESULTS : The result of the traffic model calibration indicates that internal congested density is lower than overseas. And the result of analysis according to the link attribution indicates that the more design speed and number of lanes increase, the lower the minimum speed, the higher the congested density. CONCLUSIONS: In the traffic simulation tool developed in overseas, the traffic flow is different as design speed and number of lanes, but road segment don't affect traffic flow. Therefore, these results need to apply reasonably to internal traffic simulation method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2015

In this study, we developed a gear-type vane damper which replaces the link type through a proper gear design by means of a finite element analysis. We analyzed the fluid flow according to the amount of angular displacement. torque and backlash problems were addressed in conjunction with the pinion as a structural improvement of the forced draft fan (FD FAN). Through an environmental test. Also, results nearly identical to those in the test could be drawn when using a numerical method. Finally, we compared the gear driving result with simulation results. objective of the present study is to identify a nonlinear flow rate control method for a gear-type vane damper and to propose a damper shape which offers linear flow rate control. This study is related to the development of a gear-type vane damper of the change-link type in a forced draft fan.