• 한국시뮬레이션학회논문지
• /
• 제28권4호
• /
• pp.33-43
• /
• 2019

Link-16은 미 해군 및 공군, NATO에 합동 상호운용성을 제공하는 데이터링크로 국내 무기체계에서도 운용되고 있다. 현재 Link-16 운용을 위한 시험환경, 전술모의훈련 및 상호운용성 검증 시험은 해외 SW 및 도구를 통해 전적으로 의존하고 있다. 따라서 Link-16 기반의 운용환경시험 도구의 개발이 필요하다. 본 논문에서는 Link-16 해외도구 기능 분석을 통해 Link-16 네트워크 운용성능분석 시뮬레이터를 개발하였다. 또한 연동을 위한 SIMPLE 표준 인터페이스를 구현하였다. Link-16 네트워크 운용성능분석을 위한 기능모델은 사전분석, 실시간 운용분석, 사후분석 기능모델로 구성된다. 각 기능모델에 대한 시험은 해외 SW 및 도구와 SIMPLE 연동을 통해서 수행하였다. Link-16 네트워크 운용성능분석 시뮬레이터를 통해 해외 SW를 대체하게 된다면 우리 군에 맞는 전술훈련 및 네트워크 운용성능분석, 운용(시나리오)검증을 수행할 수 있을 것이다.

• Journal of Astronomy and Space Sciences
• /
• 제37권2호
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.66-79
• /
• 2005

본 논문에서는 스마트 무인항공기의 데이터 링크의 신뢰성 향상을 위하여 그것을 구성하는 RF 송수신 시스템의 성능 분석 및 통신링크 분석을 수행하였다. 시스템 분석은 데이터 링크의 개발 사양서 및 사용되는 부품의 data sheet를 참조하여 시스템 시뮬레이션 툴인 Agilent EEsof ADS(Advanced Design System)을 이용하여 수행하였고, 통신링크 분석은 스마트 무인항공기 운용 환경에 맞는 다양한 전파 모델들을 이용하여 분석하였다. 그 결과, 시뮬레이션 결과와 개발 사양서에서 나타난 문제점들을 제시하였고, 통신링크 분석을 통해 나타난 문제점 및 시스템 설계를 위한 고려사항에 대하여 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.93-94
• /
• 2006

This paper presents the mechanics of the link of a double-action link-type hydraulic die set for the enclosed die forging. The force exerted on the link is statically investigated and its structural analysis is carried out.

• 한국위성정보통신학회논문지
• /
• 제3권2호
• /
• pp.7-12
• /
• 2008

The study discussed the link analysis for the Ka band satellite broadcasting service in Korea with respect to the transmission schemes based on the DVB-S2 standard. To analyze the effect of the rain fading to the link budget, we estimated the rain attenuation from the measured rainfall intensity in Korea. We analyzed the link budget for the Ka band transponders of Koreasat-3, and DirecTV BSS-99W, and showed the possible link availability with the DVB-S2 transmission schemes for each transponder. Based on the link analysis of the available satellites with the Ka band transponders, we suggested the required EIRP for the satellite which will be employed for the Ka band satellite broadcasting service in Korea.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.297-309
• /
• 2018

After an accident involving mooring link failures in an offloading buoy, verification of the fatigue safety in terms of the out-of-plane bending (OPB) and in-plane bending (IPB) moments has become a key engineering item in the design of various floating offshore units. The mooring links for an 8 MW floating offshore wind turbine were selected for this study. To identify the OPB stiffness (OPB moment versus interlink angle), a numerical simulation model, called the 3-link model, is usually composed of three successive chain links closest to the fairlead or chain hawse. This paper introduces two numerical simulation techniques for the 3-link analyses. The conventional and advanced approaches are both based on the prescribed rotation approach (PRA) and direct tension approach (DTA). Comparisons of the nominal stress distributions, OPB stiffnesses, hotspot stress curves, and stress concentration curves are presented. The multiple link analyses used to identify the tension angle versus interlink angle require the OPB stiffness data from the 3-link analyses. A convergence study was conducted to determine the minimum number of links for a multi-link analysis. It was proven that 10 links were sufficient for the multi-link analysis. The tension angle versus interlink angle relations are presented based on multi-link analyses with 10 links. It was found that the subsequent results varied significantly according to the 3-link analysis techniques.

• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.615-624
• /
• 1992

For the operation of the resonant DC link inverters, only limited number of modulation techniques such as the delta modulation and instantaneous current control techniques have been suggested. However, these modulation techniques have some limitations in practical operation. In this paper, the application of conventional inverter modulation techniques is suggested for the control of the resonant DC link inverter. The harmonic analysis results are presented. The results show that these modulation techniques offer good output characteristics similar to conventional inverter PWM techniques for the operation of the resonant DC link inverter. This implies that not only the delta modulation technique and instantaneous current control techniques but also various other modulation techniques can be applied to the operation of the resonant DC link inverter. This also indicates that open loop control as well as closed loop control can be used for the operation of the resonant inverter. The resonant DC link inverter with various modulation strategies is implemented using V-40 microprocessors.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1004-1013
• /
• 2017

This paper presents an interleaving scheme for parallel-connected power systems to reduce the DC-link current ripple. A paralleled generator system generates current ripple by the Pulse Width Modulation (PWM) of each generator side converter. The current ripple in the DC-link degrades the efficiency of the whole generator system and decreases the lifetime of the DC-link capacitors. To mitigate these issues, the expression of the DC-link current is derived by a double-integral Fourier analysis while considering the modulation schemes. Optimized interleaving angles for the parallel generator system are obtained based on an analysis to minimize the dominant current harmonics component. Finally, the proposed interleaving scheme reduces the RMS value of the DC-link current ripple. Simulation and experimental results verify the effectiveness of the proposed interleaving scheme.

• 한국통신학회논문지
• /
• 제7권4호
• /
• pp.173-176
• /
• 1982

通信網에 있어 加人者에 대한 서어비스品質을 표시하는 point-to-point congestion을 single Moment分析法에 의해 구할 때는 link 공급 트래픽의 정확한 계산이 필수적이다. 本論文에서는 종래 link의 全利用度狀態에서 계산되었던 link공급 트래픽이 根定利用度狀態에서 계산되어야 함을 증명하고 그 公式을 유도했다.