• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.605-613
• /
• 2014

In this work, the delay time for groundwater recharge was estimated by comparing simulated recharges by means of SWAT(Soil and Water Assessment Tool) model and WTF(Water Table Fluctuation) method. The delay time for groundwater recharge means that the time when the water from rainfall travelled through vadose zone just after getting out of soil zone bottom. As measuring this delay time is almost impossible, we used to compare the estimated values from modeling(SWAT) and analytic method(WTF). The test site is Hancheon watershed which has 8 groundwater measurement stations. The results show that the altitude has a linear relationship with the estimated delay time values. To validate these results, we conducted corelation analysis between transformed groundwater levels and observed ones. The results showed that computed groundwater levels have good corelation($R^2$=0.97, 0.87, respectively). The estimated delay time would be used for the groundwater behaviour characteristics in vadose zone. As recharge rates vary according to the height, the delay time is thought to be an import variable for the proper groundwater recharge estimation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.113-118
• /
• 2001

In this paper, we implement modules of the MPEG-2 AAC decoder using VHDL. Tools of Huffman decoder, inverse quantizer and high-density filter bank which are necessary for the AAC decoder. We designed the high speed Huffman decoder using the method of octal tree search algorithm, and reduced computational time of filter bank using IFFT. Also, we use table of computation result for an exponential calculation of Inverse quantizer in fixed-point hardware, and reduced the size of table using linear interpolation. Modules implemented by hardware through optimization work in real time at low clock frequency are possible to reduce the system size.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.317-327
• /
• 2014

As a single subject study, it was purposed to investigate kinematic differences between Yang Hak Seon vault (i.e., handspring forward and salto forward straight with triple twist, Yang-1 vault hereafter) and Tsukahara $1260^{\circ}$ twist with salto forward straight (Yang-2 vault hereafter) in gymnastics. Yang Hak-Seon (23 years, 160 cm, and 52 kg) voluntarily participated in this study. Motion capture system, consisting of fourteen cameras, were used to measure Yang-2 vault with the sampling rate of 200 Hz. Twenty six reflective markers were placed on major anatomical points of 15 body segments. Successful two trials of Yang-2 vault were collected and analyzed for the comparison. Compared Yang-1 results were based on the previous study of Park and Song (2012). Results indicated superior linear kinematics of Yang-1 vault to those of Yang-2 vault before the touchdown of vault table. However, Yang-2 vault revealed superior angular kinematics to Yang 1 vault showing more trunk twist angle (a triple and a half twist) and its faster angular velocity during the airborne. The Yang 2 vault could has advantage of increasing angular motion than Yang 1 vault as a result of a half turn off the springboard onto the vault table and a sequential touchdown of the hands.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.110-122
• /
• 2008

Pneumatic vibration isolator typically consisting of dual-chamber pneumatic springs and a rigid table are widely employed for proper operation of precision instruments such as optical devices or nano-scale equipments owing to their low stiffness- and high damping-characteristics. As environmental vibration regulations for precision instruments become more stringent, it is required to improve further the isolation performance. In order to facilitate their design optimization or active control, a more accurate mathematical model or complex stiffness is needed. Experimental results we obtained rigorously for a dual-chamber pneumatic spring exhibit significantly amplitude dependent behavior, which cannot be described by linear models in earlier researches. In this paper, an improvement for the complex stiffness model is presented by taking two major considerations. One is to consider the amplitude dependent complex stiffness of diaphragm necessarily employed for prevention of air leakage. The other is to employ a nonlinear model for the air flow in capillary tube connecting the two pneumatic chambers. The proposed amplitude-dependent complex stiffness model which reflects dependency on both frequency and excitation amplitude is shown to be very valid by comparison with the experimental measurements. Such an accurate nonlinear model for the dual-chamber pneumatic springs would contribute to more effective design or control of vibration isolation systems.

• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.93-108
• /
• 2022

Real-time hybrid simulation (RTHS) was applied to investigate the train-bridge interaction of a high-speed railway system, where the railway bridge was selected as the numerical substructure, and the train was physically tested. The interaction between the two substructures was reproduced by a servo-hydraulic shaking table. To accurately reproduce the high-frequency interaction responses ranging from 10-25Hz using the hydraulic shaking table with an inherent delay of 6-50ms, an adaptive time series (ATS) compensation algorithm combined with the linear quadratic Gaussian (LQG) was proposed and implemented in the RTHS. Testing cases considering different train speeds, track irregularities, bridge girder cross-sections, and track settlements featuring a wide range of frequency contents were conducted. The performance of the proposed ATS+LQG delay compensation method was compared to the ATS method and RTHS without any compensation in terms of residual time delays and root mean square errors between commands and responses. The effectiveness of the ATS+LQG method to compensate time delay in RTHS with high-frequency responses was demonstrated and the proposed ATS+LQG method outperformed the ATS method in yielding more accurate responses with less residual time delays.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.417-424
• /
• 2006

To get more accurate trip distribution estimation results, this study developed an improved gravity model. Using three different year's O-D table resulted from person trip survey, this study analyzed correlative between basic year's residuals and target year's residuals by gravity model. And resulted that the two have linear correlation. From this, improved gravity model was developed as adding basic year's residual to present gravity model. Developed gravity model was compared to present gravity model by estimation accuracy, and revealed that distributed trips from improved gravity model was more closer to real O-D than distributed trips from present gravity model.

• Journal of Computing Science and Engineering
• /
• v.5 no.2
• /
• pp.111-120
• /
• 2011

Data mining algorithms should exploit new hardware technologies to accelerate computations. Such goal is difficult to achieve in database management system (DBMS) due to its complex internal subsystems and because data mining numeric computations of large data sets are difficult to optimize. This paper explores taking advantage of existing multithreaded capabilities of multicore CPUs as well as caching in RAM memory to efficiently compute summaries of a large data set, a fundamental data mining problem. We introduce parallel algorithms working on multiple threads, which overcome the row aggregation processing bottleneck of accessing secondary storage, while maintaining linear time complexity with respect to data set size. Our proposal is based on a combination of table scans and parallel multithreaded processing among multiple cores in the CPU. We introduce several database-style and hardware-level optimizations: caching row blocks of the input table, managing available RAM memory, interleaving I/O and CPU processing, as well as tuning the number of working threads. We experimentally benchmark our algorithms with large data sets on a DBMS running on a computer with a multicore CPU. We show that our algorithms outperform existing DBMS mechanisms in computing aggregations of multidimensional data summaries, especially as dimensionality grows. Furthermore, we show that local memory allocation (RAM block size) does not have a significant impact when the thread management algorithm distributes the workload among a fixed number of threads. Our proposal is unique in the sense that we do not modify or require access to the DBMS source code, but instead, we extend the DBMS with analytic functionality by developing User-Defined Functions.

• Journal of the Korean Society for information Management
• /
• v.24 no.2
• /
• pp.71-87
• /
• 2007

With the rapid change of the Web and E-transaction application, the search interface is providing more powerful search and visualization methods, while offering smoother integration of technology with task. Especially, visualization techniques for long menu-lists are applied in retrieval system with the goal of improving performance in user's ability to select one item from a long list. In order to review visualization techniques appropriate to the types of users and data set, this study compared the five visualization browsers such as the Tree-structured menu, the Table-of-contents menu, the Roll-over menu, the Click menu, and Fisheye menu. The result of general analyses shows that among the hierarchical methods, the experienced group prefers the Table-of-contents method menu, whereas the novice's group prefers the Tree-structure method menu. Among the linear methods, the two groups prefer the Roll-over menu. The Roll-over menu is most preferred among the five browsers by the two groups.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.4
• /
• pp.253-259
• /
• 2018

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.484-490
• /
• 2012

In this paper, we design a digitally pre-distorted RF power amplifier operating in 900 MHz band. The linearity of RF power amplifier is improved by employing the digital pre-distortion(DPD) based on affine projection(AP) algorithm, where the look-up table(LUT) method is used with non-linear indexing. The proposed DPD with AP algorithm is compared with that with normalized least mean square(NLMS) algorithm, applied to the RF power amplifier. A commercial power amplifier module is used for verification of the proposed algorithm which shows improvement of adjacent channel leakage ratio(ACLR) by about 21 dB.