• 대기
• /
• 제24권2호
• /
• pp.197-206
• /
• 2014

The effects of different averaging operators and atmospheric stability on the turbulent fluxes are investigated using the vertical velocity, air temperature, carbon dioxide concentration, and absolute humidity data measured at 10 Hz by a 3-dimensional sonic anemometer and an open-path $CO_2/H_2O$ infrared gas analyzer installed at a height of 18.5 m on the rooftop of the Jungnang KT building located at a typical residential area in Seoul, Korea. For this purpose, 7 different averaging operators including block average, linear regression, and moving averages during 100 s, 300 s, 600 s, 900 s, and 1800 s are considered and the data quality control procedure such as physical limit check and spike removal is also applied. It is found that as the averaging interval becomes shorter, turbulent fluxes computed by the moving average become smaller and the ratios of turbulent fluxes computed by the 100 s moving average to the fluxes by the 1800 s moving average under unstable stability are smaller than those under neutral stability. The turbulent fluxes computed by the linear regression are 85~92% of those computed by the 1800 s moving average and nearly the same as those computed by 900 s moving average, implying that the adequate selection of an averaging operator and its interval will be very important to estimate more accurate turbulent fluxes at urban area.

• 대한조선학회논문집
• /
• 제61권1호
• /
• pp.8-18
• /
• 2024

The present study concerns reduced order modeling of a marine diesel engine, which can be used for outlier detection in status monitoring and carbon intensity index calculation. Principal Component Analysis (PCA) is introduced for the reduced order modeling, focusing on the feasibility of detecting and treating nonlinear variables. By cross-correlation, it is found that there are seven non-linear data channels among 23 data channels, i.e., fuel mode, exhaust gas temperature after the turbocharger, and cylinder coolant temperatures. The dataset is handled so that the mean is located at the nominal continuous rating. Polynomial presentation of the dataset is also applied to reflect the linearity between the engine speed and other channels. The first principal mode shows strong effects of linearity of the most data channels to show the linearity of the system. The non-linear variables are effectively explained by other modes. second mode concerns the temperature of the cylinder cooling water, which shows small correlation with other variables. The third and fourth modes correlates the fuel mode and turbocharger exhaust gas temperature, which have inferior linearity to other channels. PCA is proven to be applicable to data given in binary type of fuel mode selection, as well as numerical type data.

• 한국수소및신에너지학회논문집
• /
• 제16권1호
• /
• pp.66-73
• /
• 2005

Hydrogen linear power system is estimated as the next generation power system which can obtain a performance as same as fuel cell. In order to develop Hydrogen combustion power system with high thermal efficiency, it is very important to understand the basic characteristics of hydrogen combustion and establish combustion stabilization technique of its system. In this study, RICEM(Rapid Intake Compression Expansion Machine) for researching of hydrogen combustion linear power system was manufactured and evaluated, and the basic characteristics of linear RICEM were analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1048-1050
• /
• 2003

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic con type loud speakers to stilting engine driven linear reciprocating alternators, compressors, textile machines etc. In this paper, we analyze the characteristics of tubular linear motor with Halbach and radial magnet array respectively. We already derived magnetic field solutions due to the PMs and to the currents and Motor thrust. On the basis of analytical field solutions, this paper deals with flux linkages and back emf. The results are validated extensively by comparison with finite element analyses. Then, this parer also presents thrust characteristics according to design parameters for each model.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3119-3124
• /
• 2010

본 논문은 엔진 베어링에서 크랭크샤프트의 경사도를 고려했을 때와 고려하지 않았을 때 유막 동적거동을 컴퓨터 시뮬레이션을 이용하여 해석하였다. 본 해석은 탄성유체윤활 이론을 바탕으로 하여 최소유막의 동적특성을 수치적으로 해석하였다. 유막설계에 매우 중요한 인자인 크랭크샤프트 경사도를 고려하기 위하여 크랭크샤프트와 엔진베어링을 탄성체로 모델링 하였다. 유막거동해석을 위한 경계조건으로는 엔진 베어링에서 발생하는 비선형 구속력과 굽힘 모멘트를 고려하였고 이에 따른 크랭크샤프트의 경사도 영향을 고려함으로써 좀 더 실제 현상과 유사한 모델링을 수행하였다. 해석결과 엔진 베어링의 성능에 가장 큰 영향을 미치는 최소유막두께가 크랭크샤프트의 경사도를 고려하지 않았을 때보다 고려하였을 때 16%에서 24%정도 감소하는 것을 알 수 있었다. 또한, 해석결과에서와 같이 크랭크샤프트 경사도 증가는 최소유막두께의 감소를 유발하고 이에 따른 베어링 파손을 예측할 수 있었다. 따라서 본 논문의 해석결과가 자동차 엔진 베어링 설계 시 매우 유용한 자료로 사용될 것으로 사료된다.

• 한국추진공학회지
• /
• 제2권2호
• /
• pp.38-46
• /
• 1998

본 연구에서는 강인성 제어의 한 분야인 LQG용 observer를 이용한 단축 터보 젯 엔진의 RPM 속도제어에 대하여 이론을 전개하고 실제 엔진 모델에 대한 시뮬레이션을 실시하였다. 일반적인 시불변 선형연속 시스템에 대하여 상태 출력 궤환 제어기를 설계하여 asymptotic stability를 얻기 위한 충분 조건을 도출하고, 다음으로 실제 터보 젯 엔진으로부터 구한 시스템 모델에 대하여 observer를 이용하여 추적 제어를 실시하였다. 실제 엔진과 더 가까운 상황을 재현하기 위해 제어 입력부의 saturation을 함께 고려하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.576-580
• /
• 2004

In this paper, we present a design and implementation of a TV-Anytime compliant STB to provide personalized content consumption according to user preferences and various terminal/network conditions. This paper mainly details with a metadata engine which consists of meta data de-multiplexing, metadata decoding, and metadata-based content browsing. For personalized content consumption, the proposed metadata engine provides the following key functionalities: advanced EPG, non-linear segment navigation wirh Tables-of-Content and/or event-based summary, automatic recommendation of user-preferred programs, and etc. The implemented STB employing the metadata engine is successfully tested with a set of service scenarios in an end-to-end broadcasting test-bed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.75-81
• /
• 2000

To provide the appropriate direction for development of transient control in a gasoline engine, transient performance analysis and evalution under four accelerating types based on typical driver's acceleration type were implemented by experimental study. In order to evaluate the characteristics of transient performance quanititatively, the concept and method by transient response specifications were introduced. Several performance parameters in terms of engine speed(RPM), manifold absolute pressure(MAP), fuel injection duration($\DeltatI_{nj}$) and air excess ratio($\lambda$) were emasured simultaneously during the four types of the throttle valve opening with the step motor controlled by PC. The result showed that transient response specifications in terms of delay time, rising time and settling time characterized the transient performance for four acceleration types quantitatively. Intensified acceleration type was most economical and linear acceleration type revealed the best emission performance.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1510-1519
• /
• 1994

It is important to understand the friction characteristics between piston-ring assembly and cylinder wall for the friction loss reduction as well as the solution of problem such as scuffing wear and oil consumption. A new system was developed for the piston-ring assembly friction force measurement. This system was applied to the friction force measurement to find its functional relationship with variables such as engine speed, oil viscosity, and engine load. The friction mean effective pressure(fmep) was found to have a linear relationship with$(\vpsilon{U})^{0.42}$ under motering and with$(\vpsilon{U})^{0.45}$ under firing operations, where $\vpsilon$ is the kinematic oil viscosity and U is mean piston speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.609-615
• /
• 2001

In this paper, the eigenvalue sensitivity of vehicle powertrain was investigated by analytic method. The powertrain system was considered as a rigid body with multiple engine mounts, and the engine mounts were supposed as three linear springs in three orthogonal directions. The design parameters for the sensitivity analysis were engine mount properties (positions, stiffness, and orientations) and powertrain properties (mass, second moment of inertia, and center of gravity). Firstly, an effective form of eigenvalue problem for the powertrain system was introduced. Then, the analytic sensitivity of eigenvalue was derived using the equation. Lastly, the derived sensitivity equation was applied to a real powertrain system to provide its correctness and applicability.