• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.946-950
• /
• 2003

In this paper, a computer-vision based pipe shape inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle. by which pipes with wrong end-shape can be classified removed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.176-181
• /
• 2000

Stress intensity factors for a rigid line inclusion tying along a bimaterial interface are calculated by the boundary element method with the multiregion and double-Point techniques. The formula between the stress intensity factors and the inclusion surface stresses are derived. The numerical values of the stress intensity factors for the bimaterial interface rigid line inclusion in the infinite body are proved to be in good agreement within 3% when compared with the previous exact solutions. In the finite bimaterial systems, the stress intensity factors for the center and edge rigid line inclusions at interface are computed with the variation of the rigid line inclusion length and the shear modulus ratio under the biaxial and uniaxial loading conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.521-525
• /
• 2002

In this paper, a computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified removed.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1074-1085
• /
• 2004

There are many intermediate web guides in cold rolling mills process such as CRM (cold rolling mill), CGL (continuous galvanizing line), EGL (electrical galvanizing line) and so on. The main functions of the web guides are to adjust the center line of the web (strip) to the center line of the steel process. So they are called CPC (center position control). Rapid process speed cause large deviation between the center position of the strip and the process line. Too much deviation is not desirable. So the difference between the center position of the strip and the process line should be compensated. In general, the center position control of the web is obtained by the hydraulic driver and electrical controller. In this paper, we propose modelling and several controller designs for web-guide systems. We model the web and guide by using geometrical relations of the guide ignored the mass and stiffness of the web. To control the systems, we propose PID controllers with their gains tuned by the Ziegler-Nichols method, the H$\_$$\infty$/ controller model-matching method, and the coefficient diagram method (CDM). CDM is modified for high order systems. The results are verified by computer simulations.

• 한국산림과학회지
• /
• 제5권1호
• /
• pp.10-15
• /
• 1966

이 연구(硏究)는 Forest survey시(時) 지상조사(地上調査)와 항공사진(航空寫眞)을 이용(利用)한 조사(調査)와의 비교(比較) 연구(硏究)인데 tone contrast가 여의(如意)치 못한 aerial photo를 인수(人手)했기 때문에 연구(硏究)에 많은 지장(支障)을 가져와 처음의 계획(計劃)대로 추진(推進)하지 못하였다. 조사방법(調査方法)은 aerial photo를 이용(利用)했을 때 가장 편리(便利)하였고 이때 적용(適用)한 방법(方法)은 지상(地上)과 병용(併用)시킨 조사방법(調査方法)이다. 임상도작성(林相圖作成)에 Radial line plotter를 사용(使用)했는데 그 결과(結果)는 대단(大端)히 좋았다. 즉(即) compass surveying에 의(依)하여 현지(現地) check한 결과(結果)와는 none significant였다. 앞으로는 double sampling에 대(對)한 연구(硏究)가 더 필요(必要)할 것으로 생각된다. 따라서 이에 대(對)한 연구(硏究)를 계획(計劃)하여 추진(推進)할 생각이다.

• 사상체질의학회지
• /
• 제14권1호
• /
• pp.51-66
• /
• 2002

The main purpose of this study is to differentiate Sasang Constitutions of men and women by measuring 5 parts of the body. By the definitions about Four Chos(四焦) in ${\ulcorner}$The Discourse on Viscera and Bowels(臟腑論)${\lrcorner}$, the body is divided into four parts and sets up the five borderlines. They are Top-line, Bosom-line, Stomach-line, Navel-line and Bottom-line. Top-line(第一線) is the horizontal distance between Rt. & Lt. Coracoid processes passing through the acupuncture point CV-22(天突穴) or the horizontal distance between Rt. & Lt. beginning points of Axillary lines. Bosom-line(第二線) is the horizontal distance passing through Rt.& Lt. Nipples. Stomach-line(第三線) is the horizontal distance passing through Rt.& Lt. acupuncture point ST-19(不容穴). Navel-line(第四線) is the horizontal distance passing through the navel(CV-8; 神闕穴) and the acupuncture point ST-25(天樞穴). Bottom-line(第五線) is the horizontal distance between Rt. & Lt. Anterior Superior Iliac Spine(ASIS). The measured numerical values of Five Lines are the most important factors to classify the Four Constitutions(Taeyangin, Taeumin, Soyangin, Soeumin). Among the five lines, Stomach-line(Middle-line) is the base line to decide Yin and Yang. As a result, I could differentiate the four Constitutions as follows. 1. Taeyangin's Top-line is more than 36cm long. Top-line is the longest. Bottom-line is the shortest. The length-difference between Top-line and Bottom-line is more or less 10cm long. 2. In case of Taeumin, Navel-line is the longest. The numerical values of Middle and Bottom lines are almost the same or Bottom-line is shorter than Middle-line by 1 or 2 cm long. In some special case, the five lines are all the same and the body just looks like a log. 3. In case of Soyangin, just like Taeyangin, Top-line is the longest. Bottom-line is the shortest. The length of Top-line is ranged between 30cm to 35cm long. From Top-line to Bottom-line, the length gradually diminishes each by 2cm: for example, 34-32-30-28-26. 4. In case of Soeumin, the longest one is Bottom-line. Specially, Navel-line is shorter than Middle-line. Bottom-line is longer than the Middle.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.586-593
• /
• 2017

Modeling busbar distribution system as a transmission line is an important subject of power line communication in the smart grid concept. This requires extraction of busbar RLGC parameters, accurately. In this study, a comparison is made between conventional and modified method for the aspect of optimum RLGC parameters extraction in the 1 MHz to 50 MHz frequency band. The usefulness of these methods is shown both in time and frequency-domain analysis. The frequency-domain analyzes show that the inherent power of modified method can eliminate the errors especially due to the discontinuities arise in conventional method. This makes the modeling approach of modified method more advantageous for the busbars due to its robustness against disturbances in the S-parameters measurements which cannot be eliminated with the calibration procedure. On the other hand, time-domain simulations show that the transmission line representation of the modified method is closer to physical reality by handling causality issues.

• 복식
• /
• 제45권
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• 수산해양교육연구
• /
• 제19권3호
• /
• pp.478-490
• /
• 2007

A technology of ultrasonic biotelemetry for tracking fish behavior is investigated. The ultrasonic biotelemetry system is constituted by a transmitter and a receiving system. Because a pinger was mainly used for the transmitter, the capability for pinger to possess was investigated and the efficient usage for pinger was examined. A source pressure level and a frequency were synthetically examined so that pinger could realize small size, a light weight, and a long life time. The receiving system is divided roughly into directional hydrophone systems and acoustic positioning systems by the receiving method. The directional hydrophone system is divided into single beam and multiple beam with the number of hydrophone, and the acoustic positioning systems is divided into LBL (Long Base Line), SBL (Short Base Line), and SSBL (Super Short Base Line) on the basis of base line. The present situation, the merits and demerits, and the principle of each receiving method were investigated in detail, and the efficient usage for each receiving method were examined.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.51-66
• /
• 2006

This study was attempted to analyze risk factors and suggest accident prevention in live line works for power transmission lines to be developed and applied in Korea. Safety problem cannot but occur at development of live line works and application to the field. With respect to this, problems likely to occur in the field among works adopting methods of works including live line works for power transmission lines were investigated and analyzed through documentary survey and risk assessment method. The results are summarized as follows. A risk assessment method model was suggested. This method enables scientific and systematic development of safety control. That is, the owner may autonomously induce safety control and build risk assessment database by work process to use them as best training data for workers. Also, in the field, it may induce all workers to participate in safety program and secure safety by making workers seek for safety working method under smooth flow from looking at risk factors to accident prevention activities. It is deemed that this humble study will prevent both accident and injury likely to occur in live line works for power transmission lines.