Browse > Article

Web Guide Process in Cold Rolling Mill : Modeling and PID Controller  

Ahn, Byoung-Joon (Department of Mechanical and Intelligent Systems Engineering, Pusan National University)
Park, Ju-Yong (Department of Mechanical and Intelligent Systems Engineering, Pusan National University)
Chang, Yu-Shin (Department of Mechanical and Intelligent Systems Engineering, ERC/NSDM Pusan National University)
Lee, Man-Hyung (School of Mechanical Engineering, Pusan National University)
Publication Information
Journal of Mechanical Science and Technology / v.18, no.7, 2004 , pp. 1074-1085 More about this Journal
Abstract
There are many intermediate web guides in cold rolling mills process such as CRM (cold rolling mill), CGL (continuous galvanizing line), EGL (electrical galvanizing line) and so on. The main functions of the web guides are to adjust the center line of the web (strip) to the center line of the steel process. So they are called CPC (center position control). Rapid process speed cause large deviation between the center position of the strip and the process line. Too much deviation is not desirable. So the difference between the center position of the strip and the process line should be compensated. In general, the center position control of the web is obtained by the hydraulic driver and electrical controller. In this paper, we propose modelling and several controller designs for web-guide systems. We model the web and guide by using geometrical relations of the guide ignored the mass and stiffness of the web. To control the systems, we propose PID controllers with their gains tuned by the Ziegler-Nichols method, the H$\_$$\infty$/ controller model-matching method, and the coefficient diagram method (CDM). CDM is modified for high order systems. The results are verified by computer simulations.
Keywords
Cold Rolling Mill; Center Position Control; PID; H$_{}$ $\infty$/; CDM;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Lateral Dynamics of an Real Moving Web /
[ Shelton,J.J.;Reid,K.N. ] / Journal of Dynamic Systems, Measurement, and Control
2 Gahinet, P., 1996, 'Explicit Controller Formulas for LMI-based $H_{\infty}$ Synthesis,' Automatica, Vol. 32, No. 7, pp. 1007-1014   DOI   ScienceOn
3 Keel, L. H. and Battacharyya, S. P., 1999, 'Robust Stability and Performance with Fixed-OrderController,' Automatica, Vol. 35,pp. 1717-1724   DOI   ScienceOn
4 Lipatov, A. V. and Sokolov, N. I., 1979, 'Some Sufficient Condition for Stability and Instability of Continuous Linear Stationary Systems,' Automatic Remote Control, No. 39, pp. 1285-1291
5 Manabe, S., 1998, 'Coefficient Diagram Method,' 14th IFAC Symposium on Automatic Control in Aerospace, pp. 199-210
6 Markey, F. J., 1957, 'Edge Position Control for the Steel Strip Industry,' Iron and Steel Engineer, pp.119-131
7 Battacharyya, S. P., Keel, L. H., Ikeda, M., 1995, Robust Control : The Parametric approach, Prentice-Hall
8 Shelton, J. J. and Reid, K. N., 1971, 'Lateral Dynamics of an Real Moving Web,' Journal of Dynamic Systems, Measurement, and Control, pp. 180-186
9 Ogata, K., 1997, Modern Control Engineering, Pretice-Hall
10 Shelton, J. J. and Reid, K. N., 1971, 'Lateral Dynamics of an Idealized Moving Web,' Journal of Dynamic Systems, Measurement, and Control, pp. 187-192
11 Besteman, M. P. G. J., Limpens, C. H. L., Babuska, R., Otten, J. B. and Verhaegen, M., 1998, 'Modeling and Identification of a Strip Guidance Process with Internal Feedback,' IEEE Transactions on Control Systems and Technology, Vol. 6, No. 1, pp. 88-102   DOI   ScienceOn
12 Campbell, D. P., 1958, Process Dynamics, Wiley, New York, pp. 152-156
13 Doyle, J. C., Glover, K., Khargonekar, P. P. and Francis, B. A., 1989, 'State-Space Solutions to Standard $H_2$ and $H_{\infty}$ Control Problems,' IEEE Transactions on Automatic Control, Vol. 34, No. 8, pp. 831-847   DOI   ScienceOn
14 Gilbert Strang, 1986, Linear Algebra and Its Applications, 3rd edition, Harcourt Brace Jovanovich
15 Feiertag, B. A., 1967, 'Intermediate Guiding On Steel Strip Processing Lines,' Iron and Steel Engineer, pp. 147-155
16 Gahinet, P. and Apkarian, P., 1994, 'A Linear Matrix Inequality Approach to $H_{\infty}$ Control,' International Journal of Robust and Nonlinear Control, Vol. 4, pp. 421-448   DOI
17 Kyung-Mo Tahk and Kee-Hysn Shin, 2002, 'A Study on the Fault Diagnosis of Roller-Shape Using Frequency Analysis of Tension Signals and Artificial Neural Networks Based Approach in a Web Transport System,' KSME International Journal, Vol. 16, No. 12, pp.1604-1612, in Korea   과학기술학회마을
18 Levine, 1996, The Control Handbook, CRC Press, Vol. 2, pp. 819-823   과학기술학회마을
19 Gere, J. M. and Timoshenko, 1993, Mechanics of Material, Third Edition, Thomson Publishing   DOI   ScienceOn
20 Guo, R. M. and Loen, M. V., 1999, 'Design and Simulation of an Entry Edge Guide Control System for Tandem Cold Mills,' Journal of Manufacturing Science and Engineering, Vol. 121, pp. 69-75   DOI   ScienceOn
21 Young, G. E. and Reid, K. N., 1993, 'Lateral and Longitudinal Dynamic Behavior and Control of Moving Webs,' Journal of Dynamic Systems, Measurement, and Control, pp. 309-317
22 Shin, K. H. and Hong, W. K., 1998, 'Real Time Tension Control in a Multi-Stand Rolling System,' KSME International Journal, Vol. 12, No. 1, pp. 12-21, in Korea   DOI
23 Sorsen, S. L., 1966, 'Controlling Web Position,' Automatica, pp. 105-110
24 Watton, J., 1989, Fluid Power Systems, Prentice-Hall
25 Ziegler, J. G. and Nichols, N. B., 1942, 'Optimum Settings for Automatic Controllers,' Transactions of ASME, Vol. 64, pp. 759-768