• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.22-35
• /
• 1992

In highly automated machining centers, intelligent sensor fddeback systems are indispensable on order to monitor their operations, to ensure efficient metal removal, and to initate remedial action in the event of accident. In this study, an on-line tool wear detection system for thrning operations is developed, and experimentally evaluated. The system employs multiple sensors and the signals from these sensors are processed using a multichannel autoegressive (AR) series model. The resulting output from the signal processing block is then fed to a previously tranied artificial neural network (multiayered perceptron) to make a final decision on the state of the cutting tool. To learn the necessary input/output mapping for tool wear detection, the weithts and thresholds of the network are adjusted according to the back propagation (BP) method during off-line training. The results of experimental evaluation show that the system works well over a wide range of cutting conditions, and the ability of the system to detect tool wear is improved due to the generalization, fault-tolearant and self-ofganizing properties of the neural network.

• Wind and Structures
• /
• 제15권3호
• /
• pp.189-208
• /
• 2012

Lock-in and drag amplification phenomena are studied for a flexible cantilever using a simplified fluid-structure interaction approach. Instead of solving the 3D domain, a simplified setup is devised, in which 2D flow problems are solved on a number of planes parallel to the wind direction and transversal to the structure. On such planes, the incompressible Navier-Stokes equations are solved to estimate the fluid action at different positions of the line-like structure. The fluid flow on each plane is coupled with the structural deformation at the corresponding position, affecting the dynamic behaviour of the system. An Arbitrary Lagrangian-Eulerian (ALE) approach is used to take in account the deformation of the domain, and a fractional-step scheme is used to solve the fluid field. The stabilization of incompressibility and convection is achieved through orthogonal quasi-static subscales, an approach that is believed to provide a first step towards turbulence modelling. In order to model the structural problem, a special one-dimensional element for thin walled cross-section beam is implemented. The standard second-order Bossak method is used for the time integration of the structural problem.

• Earthquakes and Structures
• /
• 제17권4호
• /
• pp.411-424
• /
• 2019

In this study, a numerical model of a shield tunnel with an assembled segmental lining was built. The seismic response of the segmental lining of the section of the shield tunnel in Line 1 of the Chengdu Metro is analyzed as it passes through the interface of sand-cobble and mudstone layers. To do so, the node-stress seismic-motion input method was used to input the seismic motion measured during the 2008 Wenchuan earthquake, and the joint openings and dislocations associated with the earthquake action were obtained. With reference to the Ethylene-Propylene-Diene Monomer (EPDM) sealing gaskets used in the shield tunnels in the Chengdu Metro, numerical simulation was applied to analyze the contact pressure along the seepage paths and the waterproof property under different joint openings and dislocations. A laboratory test on the elastic sealing gasket was also conducted to study its waterproof property. The test results accord well with the numerical results and the occurrence of water seepage in the section of the shield tunnel in Line 1 of the Chengdu Metro during the 2008 Wenchuan earthquake was verified. These research results demonstrate the deformation of segmental joint under earthquake, also demonstrate the relationship between segmental joint deformation and waterproof property.

• Safety and Health at Work
• /
• 제6권4호
• /
• pp.295-304
• /
• 2015

Background: While attention has been paid to physical risks in the work environment and the promotion of individual employee health, mental health protection and promotion have received much less focus. Psychosocial risk management has not yet been fully incorporated in such efforts. This paper presents good practices in promoting mental health in the workplace in line with World Health Organization (WHO) guidance by identifying barriers, opportunities, and the way forward in this area. Methods: Semistructured interviews were conducted with 17 experts who were selected on the basis of their knowledge and expertise in relation to good practice identified tools. Interviewees were asked to evaluate the approaches on the basis of the WHO model for healthy workplaces. Results: The examples of good practice for Workplace Mental Health Promotion (WMHP) are in line with the principles and the five keys of the WHO model. They support the third objective of the WHO comprehensive mental health action plan 2013-2020 for multisectoral implementation of WMHP strategies. Examples of good practice include the engagement of all stakeholders and representatives, science-driven practice, dissemination of good practice, continual improvement, and evaluation. Actions to inform policies/legislation, promote education on psychosocial risks, and provide better evidence were suggested for higher WMHP success. Conclusion: The study identified commonalities in good practice approaches in different countries and stressed the importance of a strong policy and enforcement framework as well as organizational responsibility for WMHP. For progress to be achieved in this area, a holistic and multidisciplinary approach was unanimously suggested as a way to successful implementation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.25-29
• /
• 2004

Corona on polymer materials causes deterioration by the combined action of the discharge striking the surface and the action of certain chemical compounds that are formed by the discharges. In the design and manufacture of polymer insulators must be sufficiently large to avoid corona discharges, otherwise a shielding or corona ring (grading ring) needs to be installed on the insulator. To conduct this purpose, many researchers have investigated end-fitting of polymer insulator by voltage distribution simulation and electrical test. Grading rings are used to improve the performance of the insulator in multiple ways. They can reduce corona and associated audible noise and radio influence and television interference. The factors determining the uses of a grading ring are line voltage, geometry and dimensions of end fittings, geometry and dimensions of line hardware, and environmental conditions. In this paper, electrical property of polymer insulator with end-fitting design have been investigated by electrical field analysis, various end-fitting design, tracking wheel test, corona inception voltage and extinction voltage. Electrical field analysis is conducted by FEM program and various end-fitting is designed through this result. Designed end-fittings are manufactured and their performance is conducted by electrical performance test.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.487-496
• /
• 2020

Most of the previous works on numerical analysis of galloping of transmission lines are generally based on the quasisteady theory. However, some wind tunnel tests of the rectangular section or hangers of suspension bridges have shown that the galloping phenomenon has a strong unsteady characteristic and the test results are quite different from the quasi-steady calculation results. Therefore, it is necessary to check the applicability of the quasi-static theory in galloping analysis of the ice-covered transmission line. Although some limited unsteady simulation researches have been conducted on the variation of parameters such as aerodynamic damping, aerodynamic coefficients with wind speed or wind attack angle, there is a need to investigate the numerical simulation of unsteady galloping of two-dimensional iced transmission line with comparison to wind tunnel test results. In this paper, it is proposed to conduct a two dimensional (2-D) unsteady numerical analysis of ice-covered transmission line galloping. First, wind tunnel tests of a typical crescent-shapes iced conductor are conducted firstly to check the subsequent quasisteady and unsteady numerical analysis results. Then, a numerical simulation model consistent with the aeroelastic model in the wind tunnel test is established. The weak coupling methodology is used to consider the fluid-structure interaction in investigating a two-dimension numerical simulation of unsteady galloping of the iced conductor. First, the flow field is simulated to obtain the pressure and velocity distribution of the flow field. The fluid action on the iced conduct at the coupling interface is treated as an external load to the conductor. Then, the movement of the conduct is analyzed separately. The software ANSYS FLUENT is employed and redeveloped to numerically analyze the model responses based on fluid-structure interaction theory. The numerical simulation results of unsteady galloping of the iced conduct are compared with the measured responses of wind tunnel tests and the numerical results by the conventional quasi-steady theory, respectively.

• 한국잠사곤충학회지
• /
• 제39권2호
• /
• pp.205-209
• /
• 1997

In a line X tester crossing programme (24 lines 2 testers) the general combining ability (GCA) and specific combining ability (SCA) effects were analyzed for five economic characters in the bivoltine silkworm, Bombyx mori L. The results showed desired GCA effects in 934D1 (9500), 934B (9789) and 934A1 (9855) for cocoon yield per 10,000 larvae brushed by number. Likewise, the lines found to be superior based on GCA effects for other characters were as follows; 931D (14.040 Kgs), 935E (17.023 Kga.), 934D1 (15.643 Kgs.) and 934B (15.687 Kgs.) for cocoon yield by weight: 931D (1.717 g) and 930E (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight: 931D (1.717 g) and 930e (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight; 932B (18.7%), 933A (18.86%) and 935A (19.89%) for shell ratio. SCA effects showed the superiority of 932D$\times$KA (9822 cocoon yield per 10,000 larvae brushed by number); 932A$\times$NB4D2 (16.933 Kgs. cocoon yield per 10,000 larvae brushed by weight); 931C$\times$KA (1.911 g single cocoon weight); 934$\times$NB4D2 (0.371 g single shell weight and 21.0% shell ratio). The analysis indicated non-additive gene action for all the five characters.

• 한국잡초학회지
• /
• 제30권3호
• /
• pp.225-232
• /
• 2010

과산화계 제초제 oxyfluorfen이 처리된 비형질전환 벼와 형질전환 벼에서 Protox 발현 위치가 제초제 저항성에 미치는 영향을 비교하였다. Arabidopsis protoporphyrinogen oxidase(Protox; AP 계통)를 색소체에만 발현하는 형질전환 벼와 Myxococcus xanthus Protox 유전자를 색소체와 미토콘드리아에 모두 발현하는 형질전환 벼(TTS 계통)가 형질전환 시스템으로 사용되었다. Oxyfluorfen이 처리된 TTS4 계통은 AP 계통이나 비형질전환 벼에 비해 낮은 수준의 세포질 누출 및 malonyldialdehyde를 보여주었고, 높은 5-aminolevulinic acid 합성 능력을 유지하였다. Oxyfluorfen 작용 동안, TTS4 계통은 AP1 계통보다 높은 제초제 저항성을 보여주었는데, 이는 색소체만에서의 Arabidopsis Protox의 발현에 비해 색소체와 미토콘드리아에서의 M. xanthus Protox의 쌍발현이 광역학적인 protoporphyrin IX의 축적을 더 효율적으로 억제하였기 때문일 것이다. 이 결과들은 미토콘드리아 내 Protox의 발현이 Protox 저해형 제초제에 대한 식물의 저항성에 크게 기여함을 의미한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.393-400
• /
• 2003

This paper discusses how to implement and verify a software model of the digital relay that can be added to real time digital simulator(RTDS) model library and is then subjected to the same outputs as the actual relay. The software model is stand-alone and can be used with real relays. It is also possible to conduct interactive real-time tests when the system effects of the relay action need to be investigated. The characteristics of mho type and the quadrilateral type, which is commonly used in recently developed relays, are modeled in this paper. Single circuit line and double circuit line system are used for model verification. The transmission lines are each 100 km in length and are modeled as distributed parameter lines but not frequency dependent. The transmission lines in the single circuit system are modeled as ideally transposed line. The mutual coupling data with the parallel line was taken account in the transmission lines for the double circuit system. The main CTs and PTs are included and operated in their linear region during the tests. For the purpose of testing the relay model accuracy the faults have been applied at various points on the protected line. Its accuracy is assessed against theoretical values.

• 환경영향평가
• /
• 제12권4호
• /
• pp.291-302
• /
• 2003

This paper examined the impacts of the regional developments and dwellers behavior on the Seacoast. Seacoast features a variety of landforms which are created by the action of waves and tidal flows. The coastal landforms are found mainly in the interface between land and sea. Although erosional landforms constitute prominent landscape features as sea stack, sea arch, and rock cliff do, it is nonetheless the depositional features such as beaches, tidal flats, offshore bars, deltas, sanddunes, and coastal plains that have various ramifications for human communities. Among these, beaches and coastal sanddunes are special in that their formation is attributable to the combined action of waves, tidal flows, and winds. The main line of discussion in this dissertation is concerned with the transformation of group of beaches sanddunes along the coastline of Chungcheong-Namdo Province. To some extent, the erosion of coastal dunes has been a global phenomenon. The degradation process occurs most actively when the spring tides attack beaches, berms, and foredunes. Also involved in the transformation of coastal dunes are factors of human agency. The extent, speed, and pattern of their morphological changes are a function of land-use pattern. The reclamation of swale and the exploitation of sands as construction material and silica sand, for example, ruin the feature of coastal dunes.