• 한국광학회지
• /
• 제6권4호
• /
• pp.317-323
• /
• 1995

선폭 축소된 반도체 레이저를 이용하여 루비듐 원자의 $D_{2}$ 전이선에 대해 도플러 효과가 제거된 편광분광을 실시하고 광펌핑 편광 분광 이론과 비교하였다. 펌프광이 충분히 약했을 때 실험에서 얻어진 분산모양의 스펙트럼은 단일 주기 광펌핑 이론과 잘 일치하였다. 또한 편광 분광 신호를 직접 오차신호로 사용하여 공진기 길이를 보상한 결과, 주파수 변조를 하지 않고서도 레이저 주파수를 원자의 초미세 전이선에 안정화시킬 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.613-618
• /
• 1997

In this paper, we designed a line CCD camera for a flying image, which is composed of a line CCD sensor(2048 cells) and a rotating mirror, and investigated its optical properties. We also made the 3-D image from the flying image which is made of 2-D image being juxtaposed to 1-D images obtained by the camera, and performed the calibration to acquire high precision 3-D data. As a result, we obtained the 3-D measurement system using the slit type of laser projector is available to measure the high precision shape of objects.

• 대한전자공학회논문지SP
• /
• 제44권2호
• /
• pp.144-152
• /
• 2007

본 논문에서는 멀티 레이저 라인 조사 방법을 이용한 능동적 비젼(Active Vision)의 방법으로 비등속 이동물체의 표면을 효율적으로 모델링 하는 방법을 제안한다. 레이저 라인을 물체에 조사하고 레이저가 조사된 방향과 각도를 달리한 방향에서 이를 관찰하면 레이저 라인이 표면의 굴곡에 따라 휘어지는 현상을 관찰할 수 있다. 이를 삼각기법(triangulation method)을 이용하여 분석하면 물체의 표면 3차원 정보 획득이 가능하다. 기존에 대표적 구조화 조명기법인 단일 라인(single stripe) 기법과 단일 프레임(single frame) 기법의 장단점과 제안하는 멀티 라인 기법의 장점을 설명하고 정밀도를 높이기 위한 레이저 라인의 효율적 배치에 대하여 설명한다. 강인한 레이저 라인의 추출을 위하여, 레이저 라인 피크 검출기법과 색 분석을 통해 얻은 레이저 반응도를 함께 이용하는 방법을 소개하였고, 효과적인 레이저 라인의 라벨링 기법을 새로 제안하였다. 개별 3차원 복원 표면을 전체영상으로 표현하기 위하여 동기화 정보 획득에 영상 간 특징점 매칭을 활용한 영상 정합 기법을 접목하였다. 3차원 표면 모델링 기술을 최종적으로 컨테이너 표면 데미지 검사에 활용하여 제안 3D 모델링 기술의 우수성을 확인하였다.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2218-2224
• /
• 2010

Dye-sensitized solar cell (DSC) is a promising alternative solar cell to the conventional silicon solar cell due to several advantages. Development of large scale module is necessary to commercialize the DSC in the near future. A scribing technology of the transparent conductive oxide (TCO) is one of the important technologies on the fabrication of DSC module. A quality of the scribed line on the TCO has a decisive effect on the efficiency of DSC module. Among several scribing technologies, the fiber laser is a suitable for scribing the TCO more precisely and accurately because of their own characteristics. In this study, we try to improve the quality of the TCO scribed line by using the fiber laser. Consequently, the operating parameter of fiber laser is optimized to get the TCO scribed line with good quality. And the fiber laser scribing technology of the TCO is applied to the fabrication of the DSC with optimal operating parameter, operating current 3900mA. As a result, the current density and fill factor are improved and the total efficiency is increased because the internal resistances of DSC such as TCO sheet resistance and the resistance concerned to the electron movement in the $TiO_2$ are reduced. This is analyzed by the electrochemistry impedance spectroscopy (EIS) and the equivalent circuit model of the DSC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.365-366
• /
• 2012

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.9-14
• /
• 2011

A spectroscopic measuring system was developed in order to determine optical gain of gas laser discharge for any optical transitions between 190[nm] and 800[nm] without laser resonator. With an image optical system and a feedback optical system emission light of laser discharge are entered in a monochromator and received at a photomultiplier. Subsequently optical gain and line intensity are measured.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.508-518
• /
• 2016

In this paper, we propose a method combining an accelerometer with a cross structured light system to estimate the golf green slope. The cross-line laser provides two laser planes whose functions are computed with respect to the camera coordinate frame using a least square optimization. By capturing the projections of the cross-line laser on the golf slope in a static pose using a camera, two 3D curves’ functions are approximated as high order polynomials corresponding to the camera coordinate frame. Curves’ functions are then expressed in the world coordinate frame utilizing a rotation matrix that is estimated based on the accelerometer’s output. The curves provide some important information of the green such as the height and the slope’s angle. The curves estimation accuracy is verified via some experiments which use OptiTrack camera system as a ground-truth reference.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.43-49
• /
• 2004

In this study, a visual sensor system which can detect I-butt weld joint with height variation and includes a seam tracking algorithm was investigated. Three-dimensional position of an object can be acquired by using the method of distance measurement, i.e., an optical trigonometry which results from the spatial relations between the camera, the object and the structured light by a visible laser. Effects of laser intensity and iris number for the image quality as well as object material were investigated for the optical system design. For the image processing, a region of interest is defined from the whole image and a line image of laser is drew by using the gray level difference in the image. From the drew laser line, the weld joint can be recognized in searching the biggest point position calculated from the central difference method. Through a series of welding experiments, a good tracking performance was confirmed under GMA welding.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.177-187
• /
• 2000

Dilution is an important factor which influences the properties of clad layer. In this paper the change of dilution during laser cladding and the control of dilution are simulated by a finite element method. The adaptive mesh method is adopted for the time-dependent finite element method computation so that the shape of melt pool can be well represented. The situation of the width control of melt pool is also simulated, which indicates that the dilution can be controlled if the width of melt pool is controlled. Computational results indicate that if a line energy (input energy per unit distance) remains constant the dilution will increase with time, especially at the beginning. Simulation results show that it is possible to control dilution in a certain range if the line energy decreases with time. Experiment of Nd: YAG laser cladding with wire feeding is performed. Experiment results coincide well with the FEM results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.