Journal of Mechanical Science and Technology

  • 제14권2호
  • /
  • Pages.177-187
  • /
  • 2000
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Time- Dependent FEM Simulation of Dilution Control of Laser Cladding by Adaptive Mesh Method

  • Kim, Jae-Do (Department of Mechanical Engineering, Inha University) ;
  • Peng, Yun (Department of Mechanical Engineering, Inha University)
  • 발행 : 2000.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Dilution is an important factor which influences the properties of clad layer. In this paper the change of dilution during laser cladding and the control of dilution are simulated by a finite element method. The adaptive mesh method is adopted for the time-dependent finite element method computation so that the shape of melt pool can be well represented. The situation of the width control of melt pool is also simulated, which indicates that the dilution can be controlled if the width of melt pool is controlled. Computational results indicate that if a line energy (input energy per unit distance) remains constant the dilution will increase with time, especially at the beginning. Simulation results show that it is possible to control dilution in a certain range if the line energy decreases with time. Experiment of Nd: YAG laser cladding with wire feeding is performed. Experiment results coincide well with the FEM results.

키워드

참고문헌

  1. Agrawal, G., Kar, A. and Mazumder, J., 1993, 'Theoretical Studies on Extended Solid Solubility and Nonequilibrium Phase Diagram for Nb-Al Alloy Formed During Laser Cladding,' Scripta Metallurgic et Materialia 28, (11), 1453-1458 https://doi.org/10.1016/0956-716X(93)90498-H
  2. Atamert, S., and Bhadeshia, H. K. D. H., 1989, 'Comparison of the Microstructures and Abrasive Wear Properties of Stellite Hardfacing Alloys Deposited by Arc Welding and Laser Cladding,' Metall. Trans. A 20A, (6), 1037-1054 https://doi.org/10.1007/BF02650140
  3. Chan, C., Mazumder, J. and Chen, M. M., 1984, 'A Two-Dimensional Transient Model for Convection in Laser Melted Pool,' Metall Trans. A, Vol. 15A, pp. 2175-2184 https://doi.org/10.1007/BF02647100
  4. Damborene, J. J., Vazquez, A. J., Lopez, V., Weerasinghe, V. M. and West, D. R. F., 1993, 'Laser Cladding of Austenitic Stainless Steel on Mild Steel-Microstructural and Corrosion Properties,' Processing of Advanced Materials 3, (2), 107-113, ISSN: 0960-314X
  5. David, S A; Vitek, J M; 'Correlation Between Solidification Parameters and Weld Microstructures,' International Materials Reviews, 1989, Vol. 34, No. 5, pp. 213-245
  6. Denney, P. E. and Duhamel, R., 1998, 'Update: Laser Beam Cladding with $CO_2$ and Nd:YAG Laser,' Industrial Laser Review, No. 11, pp. 19 -21
  7. Fouquet, F., Sallamand, P., Millet, J. P., Frenk, A., Wagniere, J. D., 1994, 'Austentic Stainless Steel Layers Deposited by Laser Cladding on a Mild Steel, Realization and Characterization,' J. Phys. (France) IV4, (C4), 89-92
  8. Frenk, A., Henchoz, N., and Kurz, W., 1993, 'Laser Cladding of a Cobalt-Based Alloy, Processing Parameters and Microstructure,' Zeitschrift Fur Metallkunde 84, (12), 886-892. ISSN: 0044-3093
  9. Hirose, A., Kohno, W., Nomura, D. and Kobayashi, K. F., 1992, 'Formation of Hardfacing Clad by Laser Cladding with Blown Powder,' Tetsu-To-Hagane (Journal of the Iron and Steel Institute of Japan) 78, (10), 1585-1592
  10. Hoadley, A. F. A. and Rappaz, M., 1992, 'A Thermal Model of Laser Cladding by Powder Injection,' Metall. Trans. B, Vol. 23B, pp. 631-642 https://doi.org/10.1007/BF02649723
  11. Kar, A. and Mazumder, J., 1988, 'One-Dimensional Finite-Medium Diffusion Model for Extended Solid Solution in Laser Cladding of Hf on Nickel,' Acta Metall. Vol. 36, No.3, pp. 701-712 https://doi.org/10.1016/0001-6160(88)90104-6
  12. Kar, A. and Mazumder, J., 1989, 'Extended Solution and Nonequilibrium Phase Diagram for Ni-Al Alloy Formed during Laser Cladding,' Metall. Trans. A, Vol. 20A, pp. 363-371 https://doi.org/10.1007/BF02653915
  13. Kim, J. D. and Subramanian, R. V., 1988, 'Heat Flow in Laser Beam Welding,' 4th Intl Conf. on Welding by Electron and Laser Beams, Cannes France, pp. 175-182
  14. Kim. J. D. et al., 1992. 'The Behavior of Fracture Deviation in the Impact Test of Narrow Laser Welds,' Proc. of the Intl Symposium on Impact Engineering, Sendai, Japan, pp. 455 -460
  15. Kim, J. D., Na, I. and Park, C. C., 1998, '$CO_2$ Laser Welding of Zinc-Coated Steel Sheets,' KSME International Journal, Vol. 12, No. 4, pp. 606-614
  16. Koshy, P., 1985, 'Laser Cladding Techniques for Application to Wear and Corrosion Resistant Coatings,' Conference: Applications of High Power Lasers, Los Angeles, California, USA, 22-23 Jan. 1985, Publ: SPIE, The International Society for Optical Engineering, P. O. Box 10, Bellingham, Washington 98227-0010, USA, 80-85
  17. Li, L. J. and Mazumder, J., 1984, 'Laser Processing of Materials (edited by K. Mukherjee and J. Mazumder),' pp. 35-50. Proc. Metal. Soc. AIME, Los Angeles, Calif
  18. Liu, Y., Mazumder, J. and Shibata, K., 1994, 'Laser Cladding of Nickel-Aluminum Bronze on Al Alloy AA333,' Metall. Mater. Trans. B 25B, (5), 749-759 https://doi.org/10.1007/BF02655183
  19. Mazumder, J. and Kar, A., 1987, 'Solid Solubility in Laser Cladding,' J. Met. 39, (2), 18-23
  20. Mazumder, J., Sircar, S., Ribaudo, C. and Kar, A., 1992, 'Laser Cladding of Non-Equilibrium Metallic Alloys,' Thermomechanical Aspects of Manufacturing and Materials Processing, 319-335; Publ: Hemisphere Publishing Corp., 79 Madison Ave., New York 10016-7892, USA
  21. Mohanty, P. S. and Mazumder, J., 1998, 'Solidification Behavior and Microstructural Evolution during Laser Beam-Material Interaction,' Metall. Mater. Trans. B, Vol. 29B, pp. 1269-1279 https://doi.org/10.1007/s11663-998-0050-x
  22. Ono, M., Kosuge, S., Nakada, K. and Watanabe, I., 1987, 'Development of Laser Cladding Process,' Conference: LAMP'87: Laser Advanced Materials Process-Science and Applications, Osaka, Japan, 21-23 May 1987; Publ: High Temperature Society of Japan, c/o Welding Research Institute of Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567, Japan; 395-400
  23. Ramous, E., Giordano, L., Tiziani, A., Badan, B. and Cantello, M., 1989, 'Laser Cladding of Ceramic and Metallic Coatings on Steel,' Conference: Surface Engineering With High Energy Beams: Science and Technology, Lisbon, Portugal, 25-27 Sept. 1989; Publ: CEMUL, Av. Rovisco Pais, 1096 Lisboa Codex, Portugal, 425-433
  24. Tosto, S., Pierdominici, F. and Bianco, M., 1994, 'Laser Cladding and Alloying of a Nickel-Base Superalloy on Plain Carbon Steel,' J. Mater. Sci. 29, (2),504-509 https://doi.org/10.1007/BF01162514
  25. Uenishi, K. and Kobayashi, K. F., 1993, 'Laser Cladding of Intermetallic Compound $Al_3$ Ti on Aluminum Substrate,' Kei Kinzoku Yosetsu (Journal of Light Metal Welding and Construction) 31, (4), 1-5
  26. Yang, X., Zheng, T., Zhang, N., Zhong, M., Lin, Y. and Gao, S., 1992, 'Convection and Mass Transfer in Laser Cladding on FeCrSiB Alloy,' Acta Metallurgica Sinica (China) 28, (2), B84-B88. ISSN: 0412-1961
  27. Yellup, J. M., 1995, 'Laser Cladding Using the Powder Blowing Technique,' Surf. Coat. Technol. 71, (2), 121-128, ISSN: 0257-8972 https://doi.org/10.1016/0257-8972(94)01010-G