• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.41-46
• /
• 2012

Visible light communication(VLC) system based on LED devices has some specific advantages compared with RF system. First, visible light is harmless to human and there is no limit to using frequency band. Also, VLC system has good security performance, and it can use the very wide frequency band for data transmission. However, for simultaneously using the illumination and data transmission in VLC systems, degradation of code rate is occurred. So, in this paper, we proposed the novel line coding scheme for flicker free and efficient dimming control in VLC systems. From the simulation results, it is confirmed that proposed scheme has good flicker, dimming, and transmission performance compared to conventional variable pulse position modulation(VPPM) scheme.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.463-470
• /
• 2014

A Verilog model is proposed for transmission lines to perform the all-Verilog simulation of high-speed chip-to-chip interface system, which reduces the simulation time by around 770 times compared to the mixed-mode simulation. The single-pulse response of transmission line in SPICE model is converted into that in Verilog model by converting the full-scale analog signal into an 11-bit digital code after uniform time sampling. The receiver waveform of transmission line is calculated by adding or subtracting the single-pulse response in Verilog model depending on the transmitting digital code values with appropriate time delay. The application of this work to a USB 2.0 high-speed PHY interface reduces the simulation time to less than three minutes with error less than 5% while the mixed-mode simulation takes more than two days for the same circuit.

• Nuclear Engineering and Technology
• /
• v.36 no.5
• /
• pp.388-402
• /
• 2004

A phenomena identification and ranking table(PIRT) was developed for a main steam line break (MSLB) event for the Advanced Power Reactor-1400 (APR-1400). The selectee event was a double-ended steam line break at full power, with the reactor coolant pump running. The developmental panel selected the fuel performance as the primary safety criterion during the ranking process. The plant design data, the results of the APR-1400 safety analysis, and the results of an additional best-estimate analysis by the MARS computer code were used in the development of the PIRT. The period of the transient was composed of three phases: pre-trip, rapid cool-down, and safety injection. Based on the relative importance to the primary evaluation criterion, the ranking of each system, component, and phenomenon/process was performed for each time phase. Finally, the knowledge-level for each important process for certain components was ranked in terms of existing knowledge. The PIRT can be used as a guide for planning cost-effective experimental programs and for code development efforts, especially for the quantification of those processes and/or phenomena that are highly important, but not well understood.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.821-827
• /
• 1995

This paper presents a process control language for constructing multiloop control system. which include advanced control algorithms. In order to make controller, this language uses function blocks that do specific operations. Then, the total control algorithm is a set of function blocks, of which each block is represented as a function code. The function code is a line of simple ASCII codes denoting function, input, output, parameters. It is possible to use variables as input/output port of any block. Compared with other language using function block concept, the proposed one enables to use advanced control algorithms undefinitely, such as fuzzy, neural network, predictive controller, etc., because vector and matrix variables as input/output can be used freely in this language. To raise flexibility, we put an intermediate level, which is C-language code, between function code and target-dependent operation code.

• Applied Microscopy
• /
• v.44 no.2
• /
• pp.74-78
• /
• 2014

Dislocation density and distribution in epitaxial GaAs layer on Si are evaluated quantitatively and effectively using image processing of transmission electron microscopy image. In order to evaluate dislocation density and distribution, three methods are introduced based on line-intercept, line-length measurement and our coding with line-scanning method. Our coding method based on line-scanning is used to detect the dislocations line-by-line effectively by sweeping a thin line with the width of one pixel. The proposed method has advances in the evaluation of dislocation density and distribution. Dislocations can be detected automatically and continuously by a sweeping line in the code. Variation of dislocation density in epitaxial GaAs films can be precisely analyzed along the growth direction on the film.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.6
• /
• pp.279-285
• /
• 2006

Power line communication channels are very complicated and models for communication channels vary with the types of electrical equipment, devices and load fluctuations. So, modeling and analysis of power line channels for implementation of power line communication systems is a very important process. Power line channel modeling and simulation are performed based on power system transient simulation models and power system CAD tools to create precise and accurate models. In this paper, a channel modeling and simulation method is proposed for power line communication systems using PSCAD/EMTDC, in which a PN 63 sequence code generator is applied for impulse response of the power line channel in the simulation model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.339-346
• /
• 1991

In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2015

The paper studied possibility of improvement of efficient of data processing in the line coder when Hangul syllables in Unicode system is used for the source code. The scrambling in the line coder is to solve the problem happened due to the source code. The study is based on the HDB-3 scrambling method in ITU-T standards that is applied to AMI line coder. The referred data of Hangul syllables and its use frequency which are required to analysis was used the data extracted from the source data of the National Korean Language Institute. According to the analysis, the average 24% scrambling was generated in source code of Hangul syllables in Unicode system. When the referred Hangul syllables was applied to Unicode system, the average 27% scrambling was producted. Total 8,924ea Hangul syllables in 11,172ea Hangul syllables in Unicode system were not scrambled. Therefore the referred Hangul syllables 1,540ea were accepted in the unscrambled code areas. As a result, the existing Unicode Hangul syllable codes can't prevent the scrambling, but it is possible to completely remove the 27% scrambling with new source coding system. And then, it can be improved the data processing efficient upto minimum 27% in line coder by software in presentation layer instead of physical layer.

• Journal of Software Assessment and Valuation
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2021

In case of evaluating the similarity of the source code analysis material in the embedded system, the provided source code must be confirmed to be executable. However, it is currently being in which compilation and interface matching with hardware are provided in an unconfirmed materials. The complainant assumes that many parts of the source code are similar because the characteristics of the operation are similar and the expression of the function is similar. As for the analysis result, the analysis result may appear different than expected due to these unidentified objects. In this study, the improvement direction is sugested through the case study by the analysis process of the source code and the similarity of the unverified source code.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.38-44
• /
• 2006

In this paper, a new interference-free Home CDMA-PLC(Code Division Multiple Access-Power Line Communication) system based on the binary ZCD(Zero Correlation Duration) spreading code is proposed as a key solution to overcome the previous problems. Binary ZCD spreading code sets with enlarged family sizes are generated by carrying out a chip-shift operation of the preferred pairs. The properties or the proposed ZCD-PLC systems are effective for MPI(Multi-Path Interference) and MAI (Multiple Access Interference) cancellation in the CDMA-PLC systems. By BER performance simulation, we certified the availability of proposed ZCD-CDMA-PLC system.