• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2019

In the case of urban railway facilities, the power supply should be maintained for the safe movement of passengers in communication facilities, disaster prevention facilities and boarding area security because of the confusion when power supply is cut off due to the nature of public transportation. In addition, considering that the number of trains is running on the urban railway line, it is necessary to operate at least 30 minutes for the bus stop and at least 1 hour for the communication and disaster prevention facilities. Therefore, it is essential to supply emergency power source to maintain stable operation of induction lamp and smoke exhaust system because main power is cut off in order to prevent further spread due to fire in case of the history of urban railway section or vehicle fires. Recently, UPS(Uninterruptible Power Supply) function to prevent power outage in emergency, emergency power generation combined with ESS function which saves electricity at nighttime price time, A hybrid power storage system with a UPS function.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.113-119
• /
• 2006

We need a good image of the retina of the human eye in order to inspect or cure it. In this work, an optical system design for a retinal camera is studied and the finite schematic eye model made by Sang Gee Kim and Sung Chan Park is used. The optical system is composed of four lens groups. The rays of the entire object field are collected on the center by the 1st group and the objective is imaged by all the other groups. The image is detected by the CCD array and displayed by a monitor The 1st lens group is employed singlet and other groups are employed triplets. Ray aberrations, spot diagrams, diffraction line spread functions and MTFs are calculated for optical performance assessment. This design may be very useful for the development of a retinal camera with high performance.

• Korean Management Science Review
• /
• v.20 no.2
• /
• pp.61-80
• /
• 2003

At the end of 2002, about 91% of mobile telecommunications service subscribers have mobile phones with the mobile internet access function. However, despite the rapid spread of mobile internet phones, the number of real mobile internet users is very small. In this situation, this paper focuses on the effect of consumer demographics such as sex, age, job, etc. and consumer life-style on the use of mobile internet. This study tries to find the answers about the following questions ; 1) Which consumer demographic variables affect the use of mobile internet\ulcorner 2) How can we categorize the consumers with the mobile internet phones\ulcorner 3) What are the characteristics of categorized groups and is there any difference in using the mobile internet\ulcorner For this purpose, an off-line survey was conducted over 1,500 consumers with the mobile internet phones. This study concludes as follows ; The important demographic factors of the use of mobile internet are age, job, marriage, academic career and personal spending money. Totally viewed in the consumer demographics, the typical type of mobile internet users can be described as the young student. On the other hand, sex and family income variables do not significantly affect the use of mobile internet. And the mobile internet users can be categorized by the life-style into four distinct groups, which are named as the innovation oriented group, the practicality oriented group, the conservation oriented group, the ostentation oriented group. These findings show that the consumer life-style have various effects on the use of mobile internet.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.5
• /
• pp.1103-1113
• /
• 2012

DLP technology has been effectively enforcing privacy protection policy in on-line computing environment. However, with wide spread use of smart devices and promotion of smart-works, it has been pointed out that DLP technology cannot effectively prevent privacy leakage at smart devices and is comparatively weak at APT attack. In this paper, we suggests a hybrid approach, PPS, which integrates E-DRM system with DLP technology, taking advantages of both technologies. The technology basically uses encryption function and access control of E-DRM system, and thus it can effectively prevent leakage of privacy information of customers, even if the documents are in the hands of malicious third parties.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.17-23
• /
• 2006

In recent years, RFID has received much attention because of spread usage in industrial applications including factory, material flow, logistics and defense areas. However, there is only CRC-16 for error detection in ISO/IEC 18000-6 Protocols prepared for 860-960 MHz RFID, high error rates are expected in cases of high level of security and noisy envirionment. In this paper, we propose a usage of convolution code as a method for satisfying the high level of security requirement and system error performance.'1'he signal control function is implemented in a microprocessor with RF modulation and the convolutional encoding and Viterbi decoding are implemented in an FPGA chip.'The frame error rates are measured with and without convolution coding under the channel conditions of line-of- sight and non line-of-sight, respectively.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.127-132
• /
• 2010

In this study, the correlation among the changes of Modulation Transfer Function(MTF) in the noise and high-contrast resolution and the change of Contrast to noise ratio(CNR) in the low-contrast resolution will be examined to investigate the estimation of image quality according to the type of algorithms. The image data obtained by scanning American Association of Physicists in Medicine(AAPM) phantom was applied to each algorithm and the exposure condition of 120 kVp, 250 mAs, and then the CT number and noise were measured. The MTF curved line of the high-contrast resolution was calculated with Point Spread Function(PSF) by using the analysis program by Philips, resulting in 0.5 MTF, 0.1 MTF and 0.02 MTF respectively. The low-contrast resolution was calculated with CNR and the uniformity was measured to each algorithm. Since the measurement value for the uniformity of the equipment was below ${\pm}$ 5 HU, which is the criterion figure, it was found to belong to the normal range. As the algorithm got closer from soft to edge, the standard deviation of CT number increased, which indicates that the noise increased as well. As for MTF, 0.5 MTF, 0.1 MTF and 0.02 MTF were all sharp algorithms, and as the algorithm got closer from soft to edge, it was possible to distinguish more clearly with the naked eye. On the other hand, CNR gradually decreased, because the difference between the contrast hole CT number and the acrylic CT number was the same while the noise of hole increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.86-93
• /
• 2008

The Galileo system, a global navigation satellite system(GNSS) developed by E.U., uses the direct sequence/spread spectrum(DS/SS) modulation. A DS/SS-based system performs a fine synchronization between the received and locally generated spreading signals, via attacking process. In the absence of multipath signals, using the symmetric characteristic of the correlation function, the delay lock loop with the early minus late discriminator(EL-DLL) offers the best performance in tracking. However, in the presence of multipath signals, the symmetry of the correlation function could be lost, causing a tracking bias. In this paper, we observe that the correlation values in the advanced offset range remain almost unchanged, due to the multipath signals being received later than a line-of-sight signal. Based on this observation, we propose a novel tracking scheme for a Galileo BOC(1,1) system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.133-137
• /
• 2017

The purpose of this study was to validate for GATE (Geant4 Application for Tomographic Emission) simulation by comparing the results of GATE simulation and experiment in real SPECT system. Futhermore, we want to prove that it is possible that the quantitative research of gamma camera/SPECT imaging for therapeutic radio isotope by using GATE simulation. In this study, the SPECT system on simulation referred to the parameters of Stream-R Forte version 1.2 (Philips Medical System, Best and Heerlen, Netherlands). To understand the I-131 image of gamma camera/SPECT system, we acquired the energy spectrum and measured the full width at half maximum (FWHM) which comes from line spread function (LSF) with and without scatter material in real SPECT system. And to compare with experiment, we also measured the FWHM and acquired the energy spectrum without scatter material in GATE simulation. As a result, without scatter material, the energy peak was almost same location, which are located nearby 364 keV, and other spectrum factors are same tendency in both cases. The FWHM was increased by increasing the distance of source to detector, and the error rate was approximately 3.8%. When we used the line source with scatter material, energy spectrum also indicated similar tendency in both cases. As you confirmed earlier, GATE simulation included real instrument and radioisotope characters for therapeutic radioisotope. Therefore this result that it was possible that various quantitative study for therapeutic radioisotope imaging in gamma camera/SPECT using GATE simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.1-7
• /
• 2020

We can build regular customer relationships combining SNS (social networking service) with shopping mall like offline trade. A customer who once purchased is registered as reaular and the relationship continues afterward. The registered regular customer get sthe information about objective product shipment and besides it, he contacts with a story of frams, growth of vegetables, sows to harvests. Consumer can purchase with one click necessary foods as he looks at timeline. Sellers give information about news. discounts to customers. Besides it, food storages, recipes can be given to consumers. The good point here is that selling and promoting can be performed within one account. This is better than link is provided for selling an promoting separately. Like this, besides personal connections using SNS, categorization function gives consumers on line shopping mall service. Once the consumer purchase, he is registered as regular. Besides, the consumers who do not know each other, can share information, suggest products, spread the news.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.196-199
• /
• 1996

The amplitude LSF(Line spread function, $C_1e^{{o^2}{x^2}}$ or amplitude impulse) of the Gaussian apodized annular pupil is found to be same to that of the full aperture LSF($C_0e^{{o^2}{x^2}}$). $C_0$ and $C_1$ depending on $\sigma$, ${\omega}_0=\frac{2{\pi}}{\lambda}\;\frac{a_0}{l}$ and ${\omega}_0'=\frac{2{\pi}}{\lambda}\;\frac{a_0'}{l}$ which are the geometric parameter and pupil coordinates of the annular pupil. The important inequality relation among ${\omega}_0,\;{\omega}_0'$, a (fraction of diffraction amplitude) and $\sigma$ is obtained. It is $\frac{{\omega}_0}{\sqrt{2}}<{\sigma}{\le}(\frac{1-a}{2a})^{1/2}\;{\omega}_0$, and in the case of $a=e^{-1},\;a_0'{\le}0.34a_0$. The case of λ=0.013${\mu}{\textrm}{m}$, l=20 cm, $a_0=5cm$ and $a_0=0.34a_0=1.7cm$ give a Gaussian apodized superresolution ${\Delta}=\frac{\sqrt{log2}}{\sigma}=0.008{\mu}m$ annular pupil with the intensity signal equal to $e_{-2}$ times the signal obtainable by using the full aperture system(a=1)