• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.77-77
• /
• 2010

We used eddy current sensor for diagnosis of power line. The power line according to the cross section has 6~18 element wires. The corrosion of power line was made by sodium hydroxide. The corrosion time of power line was from 18 hours to 27 hours. We obtained physical characteristics from tensile and torsion tests of power line. The eddy current Characteristics of power line according to the corrosion appeared change of amplitude 200 ~ 800 mV.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.58-58
• /
• 2002

Recently Many technologies of the P.L.N (Power Line Network) are introduced for an efficient communication. P.L.N transmits information using power line channel. A medical information transmission system is proposed in this paper for the effective transmission. The Power Line Networks have an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the power line channel is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of medical information transmission system using P.L.N. The proposed system can be applied...I propose a telemedicine system using the power line network.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2009

A new method for simulating voltage and current distributions in transmission lines is described. It gives the time domain solution of the terminal voltage and current as well as their line distributions. This is achieved by treating voltage and current distributions as distributed state variables (DSVs) and turning the transmission line equation into an ordinary differential equation. Thus the transmission line is treated like other lumped dynamic components, such as capacitors. Using backward differentiation formulae for time discretization, the DSV transmission line component is converted to a simple time domain companion model, from which its local truncation error can be derived. As the voltage and current distributions get more complicated with time, a new piecewise exponential with controllable accuracy is invented. A segmentation algorithm is also devised so that the line is dynamically bisected to guarantee that the total piecewise exponential error is a small fraction of the local truncation error. Using this approach, the user can see the line voltage and current at any point and time freely without explicitly segmenting the line before starting the simulation.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.517-536
• /
• 2000

The purpose of this study is to investigate the internal and external line beauty of men's dress of the Chosun period from the views of dress design and dress aesthetics. 1) External Line Beauty of Men's Dress of the Chosun Period ① Functional Beauty : Having the beauty of functional line in terms of convenience, action, effectiveness, practivce and sanitation. ② Structural Beauty : Having the beauty harmonizing between lines of internal and external structures. ③ Ornamental Beauty : Having the beauty of simple line by matching accessories (gat, fan, sejodae, shoes) with a simple dress. ④ Wearing Beauty : Making tall-looking or expressing a mature masculine beauty by a visual mistake caused by a combination of internal and external structural beauty lines. 2) Internal Line Beauty of Men's Dress of the Chosun Period Including a simple but natural beauty based on natural philosophy, the beauty of courtesy emphasizing official hat and dress and the beauty of dress having aesthetic consciousness with which people enjoy an idyllic life.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.754-755
• /
• 2008

This paper presents a method for reducing the Total Harmonic Distortion(THD) of line-line back_EMF of the IPMSM with distributed winding under the no-load condition. Firstly, the specific harmonic components of line-line back EMF are reduced considering with winding factor. Secondly, THD of line-line back EMF is minimized according to change of pole angle using by Space harmonic Analysis. Finally, the optimal design for minimizing the THD is conducted using response surface methodology with finite element analysis. The validity of the design method dealt with in this paper is demonstrated by comparison between the THD of optimal model and initial model.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.53-74
• /
• 1996

The Doryon-Line is the lowest line of the Chechori and Dangeu and the length of the Chechori and the Dangeu have wide influence on the Doryon-Line. Also the change of the Doryon-Line is re-lated to the proportion the length the depth that is the curved proportion and the two curved proportion 0.04 and 0.13 are related to the roof style of the traditional architecture in Chosun Dynasty. The Chosun people have made a change the Doryon-Line monotonous in the 14C-15C but the Doryon-Line have been full of variety every fifty years in the 15C-18C. Especially Chosun people have been at war in the mountains and fields in the Doryon-Line are 0.06 and 0.07 in this period I think that the curved proportion 0.06 and 0.07 are symbolized the natural beauty in the mountains and trees of the Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2015

The current study presents a geometric measurement and analysis of the section profile for a feature line surface on an automotive outer panel. A feature line surface is the geometry which is a visually noticeable creased line on a smooth panel. In the current study the section profile of a feature line surface is analyzed geometrically. The section profile on the real press panel was measured using a coordinate measuring machine. The section profiles from the CAD model and the real panel are aligned using the same coordinate system defined by two holes near the feature line. In the aligned section profiles the chord length and height of the curved part were measured and analyzed. The results show that the feature line surface on the real panel is doubled in width size.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.5-6
• /
• 2010

Needs for the methodology of segmentation of linear feature according to the shape characteristics of line feature are increasing in cartographic linear generalization. In this study, the line segmentation method using expansible moving window is presented. This method analyzes the generalization effect of line simplification algorithms depend on the line characters of linear feature and extracts the sections which show exclusively low positional error due to a specific algorithm. The description measurements of these segments are calculated and the target line data are segmented based on the measurements. For segmenting the linear feature to a homogeneous section, expansible moving window is applied. This segmentation method is expected to be used in the cartographic map generalization considering the shape characteristics of linear feature.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.