• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.461-473
• /
• 2010

Since eco friendly and power saving products recently got into the limelight for the protection of environment, LED light technology has caught much of attention as the next generation broadcasting lighting. The newly introduced light source has such advantages as higher efficiency, longer life and its slim and compact forms leading to conveniency in installations. When combined with digital light control it gives more dynamic and various features to lighting. In this paper, used CIE standard for measuring light sources by their purposes and forms to make a comparative analysis of spectral distribution and color rendition of LED light source to those of existing lighting systems. By means of the cast shadowing and color reproduction tests I also tried to figure out the effects of LED lighting design on TV visuals where higher quality is crucial with the audience's increasing demands for quality image.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.47-53
• /
• 2013

Nowadays, Advanced country have devised a plan energy-saving through lighting effectiveness and increasing performance of lighting control system. If it uses the LED as a source of light then conserve electricity by 50%. This paper implement LEMS(Lighting Energy Management System) that applicate and Smart Dimmer and Smart Switch that control the digital LED light, support wired-wireless communication using USN(Ubiquitous Sensor Network). This system of validity and reliability control special purpose lamp including indoor and outdoor lighting and landscape lighting effectively. It minimize the use of indoor and outdoor lighting energy by USN remote integral control function of Digital System Lighting of LED and increase effectiveness of energy and is a collaborative system that can feedback the use of electricity by measurement itself through Web and Switch.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2015

In this paper, an LED lighting system that is capable of automatic or maunal dimming control using a ultrasonic sensor and Bluetooth wireless communication technology is presented. The LED lighting system consists of a ultrasonic sensor, microcontroller unit, Bluetooth wireless communication, LED driver, and LED light source. By using the implemented LED lighting system sample, it is shown that the automatic and manual dimming control is realized. By using the ultrasonic sensor, the LED lighting is automatically brighter or dimmer depending on the distance between the sensor and an object. When using a smartphone that includes Bluetooth wireless communication function, one can not only manually control the brightness of the LED lighting from level 1 to 10, but also monitor the distance between the sensor and object on the smartphone.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.311-318
• /
• 2014

This paper is to introduce a lighting source controller using high brightness LED to create a clear and reliable condition for an accurate measurement and testing, which is a core technology in clinical image system and mechanical automation system. This controller is designed to supply a stable power in a constant-current system by installing a high brightness LED driver, and to improve the reproducibility of brightness by using 32-bit ARM processor core, dividing brightness quantity into 256 levels, making the remote control and the external interface possible, and preventing and digitizing the brightness inaccuracy caused by errors of resistance values. This controller enables the lighting range to be wide and possible in a low lighting level compared to analog, adds the RS-485 communication function, and makes it for the users to control the on-off function and the dimming level by receiving date from an external device.

• KIEAE Journal
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2010

Spill light by street lighting is a kind of light pollution creating cozy night atmosphere, interfere visual private and cause insomnia at night. This study was to survey light trespass of the windows in residential buildings. According to outdoor lighting control guidance in Seoul, three different areas were selected to investigate the trespass light to windows. The results were as follows: 37% of the buildings of 386 buildings were influenced by street lighting, and 47% of windows were occurred light trespass. Therefore, the street lighting affected light trespass at night in survey area. The main reasons of light trespass were luminaire type, luminaire pole height, and street width. For protecting the light trespass to windows, it is necessary to non-cutoff fixture to full cutoff fixture by the street width.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.121-125
• /
• 2021

The machine vision technology has been widely used in the industrialized nations like the United States, Japan, and EU in the various industries from the late 1980s. Machine vision inspection system mainly consists of a camera, optics, illumination and an image acquisition system. Optimization of the illumination light source is very important. This paper shows a comparison between Pulse Width Modulation (PWM) control and strobe control in driving LED lighting system for machine vision. PWM control method has problems such as a temperature rising of LED and a flickering in image measurement for inspection. In contrast, the proposed strobe control method can suppress the temperature of LED light source below 40℃. Also, it can remove the flickering problem through a synchronization between a frame grabber and a camera shutter. Finally, the strobe control method was shown to extract clearer images with a high precision compared to PWM control method.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.130-134
• /
• 2007

This study was carry out to investigate the effect of supplemental lighting on the growth and flowering of Rosa hybrida 'Nobles' in winter. Supplemental lighting was treated during 5 hours at night with sodium lamp and fluorescent lamp, and cut flowers harvested 2 times for the experimental period. After supplemental lighting, air temperature and slab temperature in glasshouse was higher in sodium lamp treatment than control. Realtive humidity was low in sodium lamp treatment. Total nitrogen phosphate, potassium, calcium, and magnesium contents of stem in sodium lamp treatment were higher compare to the other treatment. In sodium lamp treatment, the potassium and magnesium content of leaf in control were lower than the others. Chlorophyll content was not different by source of lighting. Stem length and diameter was longer in sodium lamp treatment. In two times, the yield was highest in sodium lamp treatment. Therefore, supplemental lighting with sodium lamp in winter season was recommended for improving the yield and quality in cut rose 'Nobles'.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.203-209
• /
• 2012

Visible light communications (VLC) use modern solid-state light-emitting diodes (LEDs) to broadcast information. Emerging white-light LEDs allow the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting design using one-chip-type white LEDs is proposed for efficient illumination and optical wireless communications under the existence of several obstacles. Lighting and communication performance are analyzed to show the effectiveness of the proposed LED lighting. Specifically, the signal-to-noise ratio considering intersymbol interference and the bit-error rate of variable pulse position modulation (VPPM) with dimming control are considered.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.91-95
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mechanism is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by Langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2424-2426
• /
• 2005

In whole world consciousness of environment maintenance have increased very quickly for he end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe and Ne:Ar mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe and Ne:Ar plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe and Ne:Ar.