• 전력전자학회논문지
• /
• 제11권6호
• /
• pp.489-493
• /
• 2006

이 논문의 목표는 최적의 효율을 갖는 PLS 구동 인버터 회로를 설계하는 것이다. 일반적으로 펄스로 구동되는 PLS가 높은 광변환 효율을 갖는다고 알려져 있다. 낮은 듀티비의 펄스를 만들 수 있는 회로로는 E급 공진형 인버터와 세미브리지 인버터가 있다. 이 논문에서는 위의 두 회로의 손실을 분석한다. 손실분석을 확인하기 위해서 220V 380W 입력소비전력을 갖는 인버터 회로를 제작하고 시험하였다. 실험결과를 통해서 높은 효율의 PLS 시스템을 확인했다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.99-104
• /
• 2011

Daylighting system is an alternative to the energy crisis and environment change. And it is possible improvement system of Architectural Space Environment. Accordingly, it is very useful system. Because Daylight Duct System of Daylighting System gives high performance for its price, distribution rate is very high. But Daylighting Duct System is hard to accurate control. Accordingly, it is difficult to maintain continuously Daylight Environment in Interior Spaces. Lighting Diffusion System has been developed that it is Applying the principle of Reflector and prism diffuser for maximize the efficiency of lighting of Daylight Duct Systems through this study. And then compare lighting performance of Existing System and new Lighting Diffusion System through producing a mock-up. Thus, this study was carried out for the purpose of verification for excellence. It is that installed Each Daylighting Duct System for performance evaluation in a laboratory of width 4m, length 10m, height 2.5m. And illuminance was measured at noon on winter solstice(December 22) under clean sky. The actual measurement result was in the following. Newly developed lighting Diffusion system was measured maximum illuminance 399, minimum illuminance 221, average illuminance 141. Synthetically, daylight factor, uniformity factor and illuminance distribution were improved more than existing system. As a result, it was confirmed that was improved lighting Environment in Interior Spaces.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.750-754
• /
• 2012

An LED (light emitting diode) has the advantages of lower power consumption, energy saving, high efficiency, long lifetime, and environmental friendliness so that it has been getting the spotlight as a next-generation light source. Thus, the application range of an LED has been extended to various fields including indoor and outdoor lighting. Recently, the high efficient LED lighting has been developed, an LED has been extended its market rapidly every year and is expected to replace the general light source within near future. In this study were measured electrical and optical properties for 6 types of LED bulbs which are being developed to replace the general incandescent lamps, and were analysed under the standard of the omnidirectional lamp required by the Energy Star.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.301-308
• /
• 2013

본 논문에서는 다중센서 기반의 하이브리드 조명제어 시스템을 제안한다. 제안된 하이브리드 조명제어 시스템은 가로등의 관리 및 제어를 위한 데이터 표시부와 데이터 변환 및 처리부, 게이트웨이의 통신부로 구성하여 설계한다. 데이터는 실시간으로 저장이 가능하도록 DB를 설계하고, 실시간으로 무선 원격제어 및 스케줄을 설정하여 모니터링 할 수 있도록 구현한다. 제안된 하이브리드 조명제어 시스템의 효율성 검증결과, 스마트 기기 및 포터블 PC 등과 연동하여 실시간 모니터링 및 원격 조명제어가 가능하였고, 결과적으로 에너지 절감 및 전기료 감소, 통신비용 감소 효과를 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.274-282
• /
• 2012

본 논문에서는 지능형 LED 점등시스템을 위한 점등제어 알고리즘 설계를 제안한다. 제안하는 점등제어 알고리즘은 각각의 센서노드에서 감지된 환경정보를 데이터 버스를 통해 MCU에 전송한다. MCU의 제어 소프트웨어는 설정된 제어방식에 따라 신호 값을 이용하여 조광레벨을 계산하고 결과를 비교하여 레벨유지를 결정하도록 설계하였다. 또한 LED 조명기기에 점등제어 알고리즘을 이용하여 완전대칭 되는 패턴생성에 의하여 회전 및 반전 기법을 주기적으로 교차 수행하여 점등되도록 설계하였다. 본 논문에서 제안한 점등제어 알고리즘은 안정적으로 점등제어를 하는 시스템을 설계하여 전송 데이터의 신뢰성을 높이고 91%의 이벤트 전달 비율을 유지하였다. 또한, 조명기기의 광속은 32% 감소되었고 소비전력은 49% 감소되었으며 발열량은 32% 감소되었다. 결과적으로 LED의 수명은 50% 증가되어 에너지 효율성을 향상할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.279-286
• /
• 2013

Purpose: This study was conducted to analyze the utilization efficiencies of electric energy and photosynthetically active radiation of lettuce grown under red LED, blue LED and fluorescent lamps with different photoperiods. Methods: Red LED with peak wavelength of 660 nm and blue LED with peak wavelength of 450 nm were used to analyze the effect of three levels of photoperiod (12/12 h, 16/8 h, 20/4 h) of LED illumination on light utilization efficiency of lettuce grown hydroponically in a closed plant production system (CPPS). Cool-white fluorescent lamps (FL) were used as the control. Photosynthetic photon flux, air temperature and relative humidity in CPPS were maintained at 230 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $22/18^{\circ}C$ (light/darkness), and 70%, respectively. Electric conductivity and pH were controlled at 1.5-1.8 $dS{\cdot}m^{-1}$ and 5.5-6.0, respectively. The light utilization efficiency based on the chemical energy converted by photosynthesis, the accumulated electric energy consumed by artificial lighting sources, and the accumulated photosynthetically active radiation illuminated from artificial lighting sources were calculated. Results: As compared to the control, we found that the accumulated electric energy consumption decreased by 75.6% for red LED and by 70.7% for blue LED. The accumulated photosynthetically active radiation illuminated from red LED and blue LED decreased by 43.8% and 33.5%, respectively, compared with the control. The electric energy utilization efficiency (EEUE) of lettuce at growth stage 2 was 1.29-2.06% for red LED, 0.76-1.53% for blue LED, and 0.25-0.41% for FL. The photosynthetically active radiation utilization efficiency (PARUE) of lettuce was 6.25-9.95% for red LED, 3.75-7.49% for blue LED, and 2.77-4.62% for FL. EEUE and PARUE significantly increased with the increasing light period. Conclusions: From these results, illumination time of 16-20 h in a day was proposed to improve the light utilization efficiency of lettuce grown in a plant factory.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.1-8
• /
• 2012

The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.729-735
• /
• 2016

It is highly important issue to use an energy efficiently for sustainable prosperity of mankind. From this point of view, using LED lighting can be a good alternative because it has a lot of advantages such as high efficiency, long life time and eco-friendly manufacturing process. That is the reason why using LED lighting has been encouraged worldwide. However, in situations that LED lighting is replacing traditional lighting quickly, the problem of the flicker of LED lighting has emerged as an important issue. Therefore, in foreign countries like US or Japan in order to ensure the reliability of LED lighting, study for flickering effects of the human body and test methods are have been actively conducted. But related research in domestic situation is an insufficient condition. In this study, a flicker characteristic was measured conventional lamps such as incandescent lamps or fluorescent lamp and 81 items of LED lightings which are distributed in domestic markets.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.1-10
• /
• 2004

In view of global environmental problems and resource exhaustion, we must develop new energy resources that are abundant and provide substitutes for fossil fuels. Renewable energies, such as solar, are ideal because they are clean, inexhaustible, and available everywhere in the world. Photovoltaic(PV) system, in general, are operated as a stand-alone, grid-tied, or hybrid system. Many of the stand-alone PV systems are installed. Although the pre-installation cost of PV system is high, it poorly has been operated due to the absence of optimal management standards. Therefore a study on the performance of PV system is important for the system design and maintenance. In this paper a photovoltaic lighting system was resigned according to load consumption. Then a PV lighting system which used electrodeless lamp as a load was installed. In order to investigate the system operating characteristics we've added a monitoring system to the PV lighting system. The monitoring system using the LabVIEW program regularly checks the operation of the PV lighting system and records the system data. According to the system data, the stability and availability of the PV lighting system were evaluated.