Browse > Article
http://dx.doi.org/10.5207/JIEIE.2012.26.12.001

Evaluation of the Lighting Characteristics in High Power White LED Module with Cooling Condition  

Yun, Janghee (Department of Electrical Engineering, Soongsil University)
Ryeom, Jeongduk (Department of Electrical Engineering, Soongsil University)
Publication Information
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers / v.26, no.12, 2012 , pp. 1-8 More about this Journal
Abstract
The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.
Keywords
LED; Temperature; Luminance; Spectral Distribution; Performance;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Ji-Hyun Chung, Sung-Geun Song, Sung-Jun Park, Young-Hak Chang and Chae-Joo Moon, "The Operating System of High-power LED module with Back-Boost Mode", Journal of the Korean Institute of Power Electronics, Vol.11, No.3, pp.201-208, 2006. [Korean].   과학기술학회마을
2 Eung-Seok Kim, Cheol-Jin Kim, "A Constant Current Controller Design for Power LED Drive", Journal of the Korean Institute of Electrical Engineers, Vol.59, No.3, pp.555-561, 2010. [Korean].   과학기술학회마을
3 Eung-Seok Kim, Young-Tae Kim, "A Study on the Mathematical Modeling and Constant Current Adaptive Controller Design for Power LEDs", Journal of the Korean Institute of IIuminating and Electrical Installation Engineers, Vol.25, No.9, pp.8-13, September. 2011. [Korean].   과학기술학회마을   DOI
4 Xiaobing Luo, Sheng Liu, "A Microjet Array Cooling System for Thermal Management of High-Brightness LEDs", IEEE Transactions on Advanced Packaging, Vol.30, No.3, pp.475-484, August. 2007.   DOI   ScienceOn
5 Arturas Zukauskas, Michael S. Shur, and Remis Gaska, "Introduction to Solid-State Lighting", Wiley-Interscience Publication, pp.79-82, 2002.
6 M. F. Schubert, S. Chhajed, J. K. Kim, E. F. Schubert, D. D. Koleske, M. H. Crawford, S. R. Lee, A.J. Fischer, G. Thaler, M. A. Banas, "Effect of dislocation density on efficiency droop in GaInN/GaN light-emitting diodes" Appl. Phys. Lett., Vol.91, pp.231114, December. 2007.   DOI
7 Jeong Park, Moowhan Shin, Chin C. Lee, "Measurement of temperature profiles on visible light-emitting diodes by use of a nematic liquid crystal and an infrared laser" Optical Society of America, Vol.29, No.22, pp.2656-2658, November. 2004.
8 Sheng Liu, Jianghui Yang, Zhiyin Gan, Xiaobing Luo, "Structural optimization of a microjet based cooling system for high power LEDs" International Journal of Thermal Sciences, Vol.47, pp.1086-1095, October. 2007.
9 LW W51M Osram LED data sheet.