• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1184-1186
• /
• 2002

Recently, according to the industrial development relative to multimedia, demand of display system is radically increase, thus development for power supply of back-lighting is advanced lively. Fluorescent lamp operated at high frequency by the electronic ballast provide benefits like unnoticeable flicker effect and higher luminous efficiency. This paper presents analysis of Push-Pull type resonant inverter for CCFL drive for stable characteristic and life improvement of fluorescent lamp operated at high frequency. Also it has proposed design procedure of Current-Fed type resonant inverter. On the basis of equivalent circuit, component characteristic and suitable region of operation frequency from simulation using Matlab and Pspice is predicted. Suitability of applied equivalent model and validity of design process from the experimental results with CCFL inverter.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.839-844
• /
• 2003

This paper presents a method to segment wafer ID marks on poor quality images under uncontrolled lighting conditions of the semiconductor process. The active multiple templates matching method is suggested to search ID areas on wafers and segment them into meaningful regions and it would have been impossible to recognize characters using general OCR algorithms. This active template model is designed by applying a snake model that is used for active contour tracking. Active multiple template model searches character areas and segments them into single characters optimally, tracking each character that can vary in a flexible manner according to string configurations. Applying active multiple templates, the optimization of the snake energy is done using Greedy algorithm, to maximize its efficiency by automatically controlling each template gap. These vary according to the configuration of character string. Experimental results using wafer images from real FA environment are presented.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.315-322
• /
• 2017

LED is a promising new generation of green lighting with the advantages of high efficiency, good optical performance, long lifetime and environmental friendliness. A pulsating current can be used to drive LEDs. However, current with a high peak-to-average ratio is unfavorable for LEDs. A novel control scheme for the ac-dc critical conduction mode (CRM) flyback LED driver is proposed in this paper. By using the input voltage, output voltage and average output current to control the turn-on time of the switch, the peak-to-average ratio of the output current can be reduced. The operation principle is analyzed and an implementation circuit is put forward. Experimental results show the effectiveness of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.178-180
• /
• 2008

에너지 효율관리제도(최저효율기준, 라벨링 제도 등)는 에너지 사용의 증대와 산업의 발달에 따른 다양한 기기들의 개발에 따라 에너지기기들의 수요가 늘어나고 있는 현실에서 기기의 수요는 감소시키지 않으면서도 에너지를 감소시킬 수 있는 가장 효과적이고 경제적인 수단으로 평가받고 있다. 이는 이산화탄소를 비롯한 온실가스의 방출을 제한하여 지구온난화를 방지하고자 하는 기후변화협약을 이행하는 데에 있어 중요한 도구가 되고 있다. 본 논문은 이러한 고효율기기의 효율향상에 따를 기후변화협약에 대한 기여도 산정을 위해, 효율향상 시에 이산화탄소 절감량을 구하는 방안을 제시하고자 한다. 특히 조명기기 분야에 대해 사례연구를 수행하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.137-140
• /
• 2004

광촉매의 성능을 평가하기 위해 3종류의 광촉매를 형광등 터널등기구, 고압나트륨 터널등기구, 고압나트륨 가로등기구에 코팅하고 이들 조명기구의 신설 시와 설치 1.5개월 후의 투과율을 측정하여 그 성능을 평가하였다. 그 결과 고압나트륨 터널등기구에는 광촉매 반응이 거의 일어나지 않았고, 형광등 터널등기구에서만 그 효과가 나타났다. 이것은 고압나트륨등이 자외선 영역에서 빛을 거의 방출하지 않았기 때문이다.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.394-395
• /
• 2011

In order to increase the power conversion efficiency and improve the power factor, a modified forward converter is proposed, which adopts a capacitive output filter instead of the inductive output filter of the conventional forward converter. Therefore, the proposed converter has wide input voltage range in opposite to that of the conventional forward converters. Moreover, the proposed converter uses the critical conduction mode for automatic current shaping to improve the power factor. As a result, the proposed converter can achieve quasi-resonant zero-voltage-switching, which can minimize the switching loss of main MOSFET. In addition, the operational principle of the proposed converter is analyzed and the characteristic of the proposed converter is investigated in this paper. To validate the effectiveness of the proposed converter, a prototype of 13W is implemented and the experimental results are discussed in more detail.

• Korean Institute of Interior Design Journal
• /
• 제13호
• /
• pp.96-101
• /
• 1997

The purpose of this study was to examine the current office work environment and suggest the needs for improvement the quality and efficiency of work. To fulfill this task, information describing various environmental conditions was gathered from generally large offices in Pusan and Major cities in Kyoungnam. Data were collected on questionnaire's general information, lighting, air quality, temperature, health problems, noise and equipment arrangements, and the size fo workspace. The extent to which the attitudes and behaviors of workers were related to these environmental conditions was then examined and scrutinized. According to the development of office automation, the interest in improvement of office environment become increased. Workstation size, individual environmental control, health care, adequate storage space and noise control should be recognized as critical to the worker's environmental satisfactiov. Finally, based on the results of this study, a number ofrecommendations can be made for alleviating some of the problems that have been identified. Designers should be interested in knowing if their environments actually function in the manner in which they were intended.

• Journal of the Korean Professional Engineers Association
• /
• 제42권5호
• /
• pp.41-45
• /
• 2009

The last century of lighting has been dominated by incandescent, fluorescent and high-intensity discharge(HID)light sources. In the late 1970's, after green LEDs were invented, Dr. Ching Tang at Eastman Kodak discovered that sending an electrical impulse through carbon compound caused such material glow. Present day LED commercial packages have reached 100 lm/W, comparable to the efficacies of fluorescent and certain HID lamps. LED products available today are market as "Green-Industry" but actually low light output compared to typical light sources. The combination of high price and low light output make them a poor replacement for current technology. It is very important to compare new LED products to the most efficient conventional technology that could be used for any specific application. As LED technology advances, costs decrease, and efficiency improves, LEDs will build market share in the general illumination market.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.