• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.414-417
• /
• 2014

LED scraps consisting of highly crystalline GaN and their leaching behavior are comprehensively investigated for hydro-metallurgical recovery of rare metals. Highly stable GaN renders the leaching of the LED scraps extremely difficult in ordinary acidic and basic media. More favorable state can be obtained by way of high temperature solid-gas reaction of GaN-$Na_2CO_3$ powder mixture, ball-milled thoroughly at room temperature and subsequently oxidized under ambient air environment at $1000-1200^{\circ}C$ in a horizontal tube furnace, where GaN was effectively oxidized into gallium oxides. Stoichiometry analysis reveals that GaN is completely transformed into gallium oxides with Ga contents of ~73 wt%. Accordingly, the oxidized powder can be suitably leached to ~96% efficiency in a boiling 4 M HCl solution, experimentally confirming the feasibility of Ga recycling system development.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.8-16
• /
• 2014

Microalgae have been considered as a promising microorganism in the field of bio-industry due to their abilities to fix carbon dioxide as well as biosynthesize valuable secondary metabolites. Of many lighting sources for microalgal cultivation, LED (Lighting Emitting Diode) has been emerged as the appropriate choice with multiple advantages over the conventional bulbs. However, it is only in recent years that we have witnessed the possibility of application of LED into microalgae cultivation system. LED will serve as an evolutionary lighting source for microalgae cultivation system and open the frontier for integrative bio-industries. In this paper, we present the comprehensive review on the recent trends of LED applications into microalgal biotechnology.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.426-428
• /
• 2001

현재 국내에서 사용되고 있는 신호등용 전구는 전량 해외에서 수입되는 백열전구로써, 낮은 발광효율($8.0{\sim}8.4lm/W$)과 짧은 수명(약 4,000 hours)으로, 지방 자치단체의 경우 전기에너지의 과소비와 과중한 전력요금 부담 잦은 유지보수로 관리비용이 증가하고 교통환경을 악화시키는 원인이 되고 있으며, 국가적으로는 첨두부하 증가, 귀중한 에너지 낭비 및 석유, 가스 등 발전용 화석연료 사용증가에 따른 환경오염을 유발하고 있다. LED(Light Emitting Diode. 발광다이오드)는 발광 특성상 열 발생이 적고, 특정 파장대의 단색광을 발광하는 광원으로써 전력소비가 매우 작고, 긴 수명, 양호한 환경 특성을 가지고 있다. 옥외에 노출되고, 점등이 길고 소등 횟수가 많으며 단색광을 필요로 하는 신호등에 적합한 것으로 평가되고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 우리나라 환경 특성에 적합한 LED 교통 신호등 규격을 연구하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.304-308
• /
• 2006

We have synthesized a $Eu^{2+}-activated\;Sr_3MgSi_2O_8$ blue phosphor and $(Sr,Ba)_2SiO_4$ yellow phosphor and prepared white LEDs by combining these phosphors with a InGaN UV LED chip. Three distinct emission bands from the InGaN-based LED and the two phosphors are clearly observed at 405 nm, 460 nm and at around 560 nm, respectively. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This blue emission was used as an optical transition of the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor. The 460 nm and 560 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the $Sr_3MgSi_2O_8:Eu$ and $(Sr,Ba)_2SiO_4$ host matrix. As a consequence of a preparation of UV White LED lamp using the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the ration of epoxy/two phosphor (1/0.2361). At this time, the CIE chromaticity was CIE x = 0.3140, CIE y = 0.3201 and CCT (6500 K).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2007

To verify the inhibitory or protective effects of light-emitting diode(LED) irradiation on apoptotic cell death induced by $CoCl_2$, human SH-SY5Y cells were treated with $CoCl_2$ and LED were used to irradiate the cells. In the cell viability assay, cells were died slowly from $50{\mu}M$ to $250{\mu}M$ and about 50% of cells died after 12 hours at $400{\mu}M$ of $CoCl_2$. The Diff-Quik staining revealed that cells showed condensation of DNA and blebbing of the cell membrane. The DNA fragmentation assay revealed the DNA fragmentation, which is another apoptosis marker, occurred in cells treated with $400{\mu}M$ $CoCl_2$ for 16 hours. In the western blot for HIF-$1{\alpha}$, HIF-$1{\alpha}$ was expressed after 3 hours from induction and peaked maximally at 16 hours. In the cell viability assay of the effects of LED irradiation (at 590 nm for 1 hour 20 minutes), the cells showed more proliferation (about 20%) than the control group. The RPA assay of various apoptosis-related molecules showed that pro-apoptosis molecules such as Bax, Bak, and Bid were upregulated in the $CoCl_2$ treatment group. This means that the apoptotic cell population was increased. However there was some significant changes in LED irradiated cells. In the $CoCl_2$-treated LED irradiation group, those molecules were down-regulated more than in the only $CoCl_2$-treated group. These results have shown that $CoCl_2$ may induce apoptotic cell death in human SH-SY5Y neuroblastoma cells. And LED irradiation has a positive effect on apoptotic cells by down-regulation of pro-apoptotic molecules.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.144-144
• /
• 2008

Blue light emitting diode structures consisting of the InGaN/GaN multiple quantum wells were grown by metalorganic chemical vapor deposition at different growth temperatures for the p-GaN contact layers and the influence of growth temperature on the emission and microstructural properties was investigated. The I-V and electroluminescence measurements showed that the sample with a p-GaN layer grown at $1084^{\circ}C$ had a lower electrical turn-on voltage and series resistance, andenhanced output power despite the low photoluminescence intensity. Transmission electron microscopy (TEM) revealed that the intense electro luminescence was due to the formation of a p-GaN layer with an even distribution of Mg dopants, which was confirmed by TEM image contrast and strain evaluations. These results suggest that the growth temperature should be optimized carefully to ensurethe homogeneous distribution of Mg as well as the total Mg contents in the growth of the p-type layer.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3151-3153
• /
• 2000

현재 국내에서 사용되는 교통신호등용 전구는 전량 해외에서 수입하는 백열전구로써 발열에 의한 낮은 발광 효율과 짧은 수명으로. 전력의 과소비와 과중한 전력요금 부담. 잦은 유지보수로 관리비용의 증가와 교통환경 악화의 원인이 되고 있으며, 국가적으로는 귀중한 에너지의 낭비, 첨두부하 증가에 따른 전력수요관리의 어려움, 발전용 화석연료 사용증가에 따른 환경오염 유발 등의 문제가 발생하고 있다. 그러나 $8{\sim}12$인치의 원형(또는 사각) PCB 기판에 수백개의 고휘도 LED(반도체 발광 다이오드, Light Emitting Diode)와 구동회로로 구성되는 LED 교통신호등은 발열에 의한 열손실이 거의 없고, 특정 파장대의 단색광을 발광하여 착색렌즈 사용에 따른 빛손실이 없어 80% 이상의 대폭적인 에너지 절약이 가능하며. 또한 긴 수명으로 유지보수비용의 절감 및 교통환경개선 효과가 크게 기대되어 미국, 일본 등 고휘도 LEB 기술 선진국을 중심으로 경쟁적으로 LED 신호등 기술개발에 심혈을 기울이고 있으며, 일부 시범 보급중에 있다. 교통신호등은 특성상 국민의 안전과 직결된 사안으로 엄격한 규격으로 제한하고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조 기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 에너지절약형 우리나라 환경 특성에 적합한 LED 교통 신호등의 규격 제정 및 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 평가하고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.185-196
• /
• 2020

Low-pressure sodium lamps, high-pressure sodium lamps and fluorescent lamps etc are mainly used tunnel lighting in Rep. of Korea. Power rates for tunnel lighting are known to account for the highest percentage in the tunnel maintenance costs. Therefore, tunnel lights are being replaced by LED that have advantages such as low power consumption and longevity. To analysis effect of replacement low pressure sodium lamp with LED, illumination and monthly power usage for a year are investigated for 8 tunnels. Power usage for tunnel lighting is decreased by 26.1% to 59.6%, and illumination is increased by 34.1% to 293% replacing low pressure sodium lamp with LED.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.152-158
• /
• 2013

The purpose of this study is to investigate cooling performance of high power LEDs from 100 to 200 W class by using a jet impingement cooling module. The numerical analysis of forced convection cooling inside cooling module is carried out using a multi-purpose CFD software, FLUENT 6.3. In the experiments, the LED cooling system consists of jet impingement module, heat exchanger, water reservoir, and pump. In the present study, the cooling performance of jet impingement cooling module is investigated to determine the effect of the heat sink types on the impinging surface, the space and length of fins. Numerical and experimental studies show the reasonable agreement of LED metal PCB temperature between those results and give the optimized design parameters such as the space of fin and the length of fin. Also, the pin fin type of heat sink is found to be more efficient than the plate type heat sink in jet impingement cooling.