• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.111-117
• /
• 2016

The objective of this study was to analyze the microclimate and the growth of tomato and lettuce in the greenhouses covered with spectrum conversion films using different phosphor particles sizes. Two spectrum conversion films using phosphor particles larger than $10{\mu}m$ (Micro-film) and smaller than 500 nm (Nano-film) in radius, and poly-ethylene (PE) film were used in double-layered greenhouses as outer coverings. PE films were used as inner coverings in all the greenhouses. Thickness of the films for inner and outer coverings was 0.06 mm. Tensile strength, elongation, and tearing resistance of the Micro- and Nano-films were not different from those of the PE film. Transmittances at a wavelength of 300-1100 nm were a little higher at the Micro-film and lower at the Nano-film than that of the PE film, respectively. Air temperatures at the Micro- and Nano-films were over $2^{\circ}C$ higher than at the PE film, but no significant difference was observed between the two light conversion films. The soil temperature at the Nano-film was $1.5^{\circ}C$ and $3^{\circ}C$ higher than at the Micro- and PE films, respectively. The yields of tomato at the Micro- and Nano-films were 12% and 14% higher than at the PE film, but no significant difference was observed between the two spectrum conversion films. The total soluble solid showed no significant differences among all the films. The yields of lettuces at the Micro- and Nano-films were 27% and 59% higher than at the PE film. Hunter's red (a) value of the lettuce leaf was the highest at the Nano-film. In this experiment, tomatoes requiring high irradiation were better at the Nano film, while lettuce requiring low irradiation better at the Micro film.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.81-86
• /
• 2015

"Youhan" (Hordeum vulgare L.), a new whole-crop barley cultivar, was developed by the breeding team at National Institute of Crop Science, RDA in 2012. Youhan has the growth habit of III, a light green and mid-sized leaf, hooded and lax-type spikes. The cultivar showed 107 cm of culm length, 641 spikes per $m^2$. The heading date of Youhan was May 1, which is one day later than that of the check cultivar "Yuyeon" in upland, and 2 days earlier than that of Yuyeon in paddy field. The maturation time was similar to check cultivar Yuyeon on June 4 in upland and May 31 in paddy field. In terms of winter hardiness and resistance to lodging and disease, Youhan also performed better than the check cultivar. The average forage dry matter (DM) yield in the regional yield trial was approximately 12.6 ton $ha^{-1}$ and 12.0 ton $ha^{-1}$ in upland and paddy field, respectively, which were 6% and 5% higher than that of the check. The yield also showed 7.3% of crude protein, 26.8% of ADF (acid detergent fiber), 47.8% of NDF (neutral detergent fiber), 67.7% of TDN (total digestible nutrients), and a higher grade of silage quality for the whole-crop barley. Fall sowing cropping of Youhan is recommended only in those areas where the average daily minimum-mean temperatures in January are higher than $-8^{\circ}C$, and it should not be cultivated in mountainous areas of Korea.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.144-161
• /
• 2007

The studied Nangsan area is widely covered by the Jurassic biotite granodiorite, which is mainly light grey in color and medium-grained in texture. Results of the regional fracture pattern analysis for the granodiorite body are as follows. Strike directions of fractures show three dominant sets in terms of frequency order. The sets are in an order of a (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order). Spacings of the fractures are mostly predominant in less than 200 cm. Therefore, the granodiorite of the area has more potential for non-dimensional stones than dimension ones. And orientations of vertical quarrying planes can be also divided into two groups in terms of frequency $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order) and (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order). The orientations of the two groups are more or less different from those of the regional fracture patterns. These can be mainly attributed to the preferred orientations of microcrack developed in the quarries. Of physical properties, specific gravity, absorption ratio, porosity, compressive strength, tensile strength and abrasive hardness are 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ and 31, respectively. Contrary to the porosity, both granites of the Nangsan and Sogrisan areas show almost similar values of the abrasive hardness. These can be explained by the differences of Qz+Af modes, which can be regarded as an index for abrasive resistance. Meanwhile, it is anticipated that comprehensive understanding of the orientations of vertical quarrying planes and characteristics of various physical properties will be utilized as an important information for stone resources.

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.445-453
• /
• 2011

Objectives : The purpose of this study was to determine of fluoride-releasing of orthodontic resin cements containing fluoride and compare decalcification of tooth attached fluoride and non-fluoride resin cements. Methods : Total eighty premolar tooth were used in this study. Forty tooth were used for fluoride releasing measurement and forty tooth were used for decalcification measurement. Each forty tooth were randomly divided into four groups, and brackets were attached on tooth surface with Blugloo, Light Bond, Orthofolw(experimental groups) and Transbond cement(control group). After brackets were attached on tooth surface, forty tooth were immersed in artificial salival and then the quantity of fluoride releasing was measured ever day for 8days and then three-days intervals for 3 weeks. Forty tooth were immersed in decalcification solution for 48hours and then degree of decalcification was measured as lesion area, ${\Delta}F$, and ${\Delta}Q$ using QLF. The data were analysed by one-way ANOVA and Pearson's correlation coefficient using SPSS 12.0 program. Results : Fluoride release of experimental groups was higher than control group(p<0.05). Cumulative fluoride release of experimental groups was also higher than control group(p<0.05). There were the highest release during first day. ${\Delta}F$, and ${\Delta}Q$ was high TB > BG > OF > LB (p<0.05). Change of ${\Delta}F$, and ${\Delta}Q$ was also high TB > BG > OF > LB (p<0.05). As for correlation between fluoride release and lesion area, ${\Delta}F$, and ${\Delta}Q$ showed negative correlation but there was no significant difference. Conclusions : This study shows that orthodontic reins cements containing fluoride release fluoride and prevent initial enamel decalcification caused by orthodontic treatment.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.445-468
• /
• 2000

Background: Retrograde cerebral perfusion(RCP) is currently used for brain protection during aorta surgery, however, for the safety of it, various data published so far are insufficient. We performed RCP using pig and investiaged various parameters of cerebral metabolism and brain injury after RCP under deep hypothermia. Material and Method: We used two experimental groups: in group I(7 pigs, 20 kg), we performed RCP for 120 minutes and in group II (5 pigs, 20 kg), we did it for 90 minutes. Nasopharyngeal temperature, jugular venous oxygen saturation, electroencephalogram were continuously monitored, and we checked the parameters of cerebral metabolism, histological changes and serum levels of neuron-specific enolose(NSE) and lactic dehydrogenase(LDH). Central venous pressure during RCP was mainained in the range of 25 to 30 mmHg. Result: Perfusion flow rates(ml/min) during RCP were 130$\pm$57.7(30 minutes), 108.6$\pm$55.2(60 minutes), 107.1$\pm$58.8(90 minutes), 98.6$\pm$58.7(120 minutes) in group I and 72$\pm$11.0(30 minutes), 72$\pm$11.0(60 minutes), 74$\pm$11.4(90 minutes) in group II. The ratios of drain flow to perfusion flow were 0.18(30 minutes), 0.19(60 minutes), 0.17(90 minutes), 0.16(120 minutes) in group I and 0.21, 0.20, 0.17 in group II. Oxygen consumptions(ml/min) during RCP were 1.80$\pm$1.37(30 minutes), 1.72$\pm$1.23(60 minutes), 1.38$\pm$0.82(90 minutes), 1.18$\pm$0.67(120 minutes) in group I and 1.56$\pm$0.28(30 minutes), 1.25$\pm$0.28(60 minutes), 1.13$\pm$0.26(90 minutes). We could observe an decreasing tendency of oxygen consumption after 90 minutes of RCP in group I. Cerebrovascular resistance(dynes.sec.cm-5) during RCP in group I incrased from 71370.9$\pm$369145.5 to 83920.9$\pm$49949.0 after the time frame of 90 minutes(p<0.05). Lactate(mg/min) appeared after 30 minutes of RCP and the levels were 0.15$\pm$0.07(30 minutes), 0.18$\pm$0.10(60 minutes), 0.19$\pm$0.19(90 minutes), 0.18$\pm$0.10(120 minutes) in group I and 0.13$\pm$0.09(30 minutes), 0.19$\pm$0.03(60 minutes), 0.29$\pm$0.11(90 minutes) in group II. Glucose utilization, exudation of carbon dioxide, differences of cerebral tissue acidosis between perfusion blood and drain blood were maintained constantly during RCP. Oxygen saturation levels(%) in drain blood during RCP were 22.9$\pm$4.4(30 minutes), 19.2$\pm$4.5(60 minutes), 17.7$\pm$2.8(90 minutes), 14.9$\pm$2.8(120 minutes) in group I and 21.3$\pm$8.6(30 minutes), 20.8$\pm$17.6(60 minutes), 21.1$\pm$12.1(90 minutes) in group II. There were no significant changes in cerebral metabolic parameters between two groups. Differences in serum levels of NSE and LDH between perfusion blood and drain blood during RCP showed no statistical significance. Serum levels of NSE and LDH after resuming of cardipulmonary bypass decreased to the level before RCP. Brain water contents were 0.73$\pm$0.03 in group I and 0.69$\pm$0.06 in group II and were higher than those of the controls(p<0.05). The light microscopic findings of cerebral neocortex, basal ganglia, hippocampus(CA1 region) and cerebellum showed no evidence of cerebral injury in two groups and there were no different electron microscopy in both groups(neocortex, basal ganglia and hippocampus), but they were thought to be reversible findings. Conclusion: Although we did not proceed this study after survival of pigs, we could perform the RCP successfully for 120 minutes with minimal cerebral metabolism and no evidence of irreversible brain damage. The results of NSE and LDH during and after RCP should be reevaluated with survival data.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.519-531
• /
• 2018

The purpose of this study was to investigate the effects of combined exercise program on short physical performance battery, bone mineral density and parathyroid hormone levels in elderly women. This study subjects were 22 elderly female volunteers, aged 65-75 years and they divided into the combined exercise group(n=11) and the "no exercise" control group(n=11). The combined exercise included the line dance program performed twice per week for 60 minutes and the resistance exercise program performed once per week during 12 weeks. Exercise intensity was progressively increased from RPE "fairly light" to "slightly hard" (from 11 to 14). The findings of this study were as follows; Short physical performance battery(Balance test, gait speed, and rising from a chair five times) and bone mineral density (lumbar spine L2~L4 bone densities, and the T-score) were significantly increased after 12 weeks in the exercise group compared to the baseline. The PTH level was significantly decreased in the exercise group compared to the baseline. In conclusion, regular and continuous physical activity was effective for improving short physical performance and had a positive effect on bone mineral density and parathyroid hormone. With aging, women have decreased muscle strength and bone density and therefore, it is strongly recommended that women need to carry out continuous physical activity to prevent disease and ensure a healthy retirement.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.766-773
• /
• 2013

A transparent film was fabricated based on bacterial cellulose (BC), BC has excellent physical strength and stability at high temperature and it is an environmental friendly flexible material. In order to improve the conductivity, silver nanowire (AgNW) and/or graphene were introduced to the BC membrane. The aspect ratio of the AgNW synthesized in this study was 214, with a length of $15{\mu}m$ and width of 70 nm. The higher aspect ratio improved the conductivity by reducing the contact resistance. The thermal and electrical properties of 7 types of films prepared were investigated. Each film was fabricated with rectangular shape ($2mm{\times}2mm{\times}50{\mu}m$). The films were scored with a net shape by a knife, and filled with AgNW and graphene to bestow conductivity. The film filled with AgNW showed favorable electrical characteristics with a thickness of $350{\mu}m$, electron concentration of $1.53{\times}10^{19}$, electron mobility of $6.63{\times}10^5$, and resistivity of 0.28. The film filled with graphene had a thickness of $360{\mu}m$, electron concentration of $7.74{\times}10^{17}$, electron mobility of 0.17, and resistivity of 4.78. The transmittances at 550 nm were 98.1% and 80.9%, respectively. All the films were able to light LEDs bulbs although their brightness differed. A thermal stability test of the BC and PET films at $150{\pm}5^{\circ}C$ showed that the BC film was more stable, whereas the PET film was quickly banded. From these results, it was confirmed that there it is possible to fabricate new transparent conductivity films based on BC.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.177-189
• /
• 2016

This study was conducted to verify the relationships between the expression values of stress-related markers and their production performances in 25 strains of Korean domestic chicken breeds. For stress response markers, the amount of telomeric DNA; expression levels of heat shock protein (HSP)-70, $HSP-90{\alpha}$, and $HSP-90{\beta}$; and comet scores were analyzed. Production performances were measured by the survival rate, body weights, days at first egg laying, egg weight and hen housed egg production. The results showed that the production traits and values of stress-related markers showed significant differences between strains. In general, the stress response of pure bred chickens with heavy weights was relatively high, while that of hybrid chickens with light weights was relatively low. The correlation coefficients between telomere contents and body weights showed that there were weak negative relationships. However, the correlations of telomere content with the survival rate and egg production were weakly positive after 20 weeks old. The expression levels of HSP genes and DNA damage rate (comet scores) were positively correlated to body weight, but were negatively correlated to the survival rate and egg production. The results implied that increasing body weight was associated with increasing HSPs expression and the DNA damage rate was associated with decreasing telomere content. In addition, increasing HSPs expression and the DNA damage rate decreased the survival rate and egg production, but the relationships with the telomere content was the reverse. Correlations among the stress-related markers showed that there were significant correlation coefficients between all of the marker values. HSPs expression was negatively correlated to the telomere content, while it was positively correlated to the DNA damage rate. There was a highly negative correlation between the telomere content and DNA damage rate. In conclusion, increasing the HSP values and DNA damage rate can promote telomere reduction, which led to a decrease in disease resistance and robustness of the chicken. Thus, increasing the stress response was verified to adversely affect the laying performance and viability of chickens.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.125-131
• /
• 2017

'Saeyoung', a winter triticale (X Triticosecale Wittmack) for forage, was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2012. The cultivar 'Saeyoung' has narrow and long leaves of light green color, middle size and thin culm, and a medium grain of brown color. The heading date and yellow ripe stage of 'Saeyoung' was May 3 and May 27, which were similar to check cultivar 'Shinyoung', respectively. 'Saeyoung' showed a little stronger in cold tolerance and a little weaker in resistance to lodging than the check, and wet injury, powdery mildew, and leaf rust were similar to those of the check cultivar. The forage fresh and dry matter yields of 'Saeyoung' at milk-ripe stages were 47.2 and $15.6MT\;ha^{-1}$, respectively, which was 9% and 4% higher than those of the check. The crude protein content of 'Saeyoung' was 0.4% lower than 6.8% of the check, while was higher than the check cultivar 'Shinyoung' in neutral detergent fiber, acid detergent fiber. Total digestible nutrients of 'Saeyoung' was also 3% lower than 62.8% of the check cultivar. It showed grain yield of $4.1MT\;ha^{-1}$, which was 11% higher than that of the check. 'Saeyoung' is recommended for fall sowing forage crops in areas in which average daily minimum mean temperatures in January are higher than $-10^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.