• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.71-80
• /
• 1998

A computer aided system has been developed for the focal length measurement/compensation in camera manufacture. Signal data proportional to light intensity is obtained and sampled very rapidly from the line CCD. Based on the measured signal, the MTF performance is calculated, where the MTF is the ratio of magnitude of the output image to the input image. In order to find the optimum MTF performance, an effcient algorithm has been implemented using the least squares technique. The developed system has been applied to a practical camera manufacturing process, and demonstrated high productivity with high precision.

• 한국광학회지
• /
• 제4권3호
• /
• pp.330-337
• /
• 1993

Erbium이 첨가된 광섬유를 이득 매질로 하여 광섬유 loop mirror가 포함된 '8' 자 형태의 고리형 광섬유 레이저를 구성하였다. Loop mirror내의 양방향으로 진행하는 두 광파간의 비선형적 위상차로 인하여 loop mirror의 투과율이 입사광 강도에 의존함으로써 수동형의 모드록킹이 가능하였으며, 외부 perturbation 이나 변조소자의 도움없이도 공진기내의 편광조절기만의 조절에 의해 모드록킹ㅇ르 시작시킬 수 있었다. 또한 모드록킹에 의한 펄스 출력 파형을 비선형 loop mirror의 투과특숭과 관련하여 고찰하여 보았다.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.982-988
• /
• 2009

In a surface type ac PDP having $200{\mu}m$ gap between the surface electrodes, the luminous efficacy has a reciprocal dependence on the sustaining frequency. The discharge current flowing to the address electrodes are measured to investigate the phenomena and spectral intensity from visible light to infra red is measured to verify phosphor saturation with the frequency. Experiments show the discharge between the address and surface electrodes deteriorates the efficacy in high sustaining frequencies. Pulse width modulation is introduced to improve the efficacy. In optimum conditions, we obtained 1.99lm/w and 1.79lm/w at 200kHz and 250kHz, respectively.

• 한국광학회지
• /
• 제22권3호
• /
• pp.122-128
• /
• 2011

하향신호를 위해서는 반사형 반도체 증폭기를 기반으로 한 광역선폭 광원 기술이 사용되었고 상향신호를 위해서는 파장 재사용 기술이 사용된 양방향 파장분할 다중화 수동 광네트워크 (WDM-PON)가 컴퓨터 시뮬레이션을 통해 구현되었다. 이 시스템에서 세가지 다른 종류의 광필터들이 비교되어 필터링의 영향이 분석되었고, 광 스펙트럼과 아이 다이어그램 (eye diagram)의 분석을 통해 파장 재변조 기술을 최적화 하였다. 최적화된 시스템 조건을 이용하여 양방향 신호의 전송 성능 곡선을 구하였고 이 시스템에서 반사에 의한 신호 왜곡의 영향을 분석하였다.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.286-292
• /
• 2020

Imaging through multicore fiber (MCF) is of great significance in the biomedical domain. Although several techniques have been developed to image an object from a signal passing through MCF, these methods are strongly dependent on the surroundings, such as vibration and the temperature fluctuation of the fiber's environment. In this paper, we apply a new, strong technique called deep learning to reconstruct the phase image through a MCF in which each core is multimode. To evaluate the network, we employ the binary cross-entropy as the loss function of a convolutional neural network (CNN) with improved U-net structure. The high-quality reconstruction of input objects upon spatial light modulation (SLM) can be realized from the speckle patterns of intensity that contain the information about the objects. Moreover, we study the effect of MCF length on image recovery. It is shown that the shorter the fiber, the better the imaging quality. Based on our findings, MCF may have applications in fields such as endoscopic imaging and optical communication.

• 한국광학회지
• /
• 제13권6호
• /
• pp.510-514
• /
• 2002

본 논문에서는 Mach-Zehnder변조기 양방향 변조를 이용하여 chirped fiber grating의 시간지연을 측정할 수 있는 간단한 시스템을 제안하였다. 시간차를 두고 양방향 변조된 광신호는 RF영역에서 주기적인 간섭무늬를 만들게 된다. 이러한 광파장에 따라 변하는 간섭무늬의 주기를 측정하여 chirped fiber grating의 시간지연을 측정할 수 있다 5cm의 chirp과3.16nm의 대역폭을 갖는 chi ed fiber grating의 시간지연을 측정하였으며 측정된 시간지연의 평균 기울기는 183ps/nm이고 고1.7%보다 작은 오차 범위에서 측정되었다.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.92-97
• /
• 2007

This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for both Rat bone marrow and Rat tissue cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590 nm transmittance of ELISA reader. As a result, the cell increase of Rat bone marrow and tissue cells was verified in irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.16-16
• /
• 2010

GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.1-7
• /
• 2012

In this paper, we present a new lighting control method considering ambient light in addition to the required lighting illumination for efficient energy saving of a LED stand. We estimate accurate environmental illuminance using a cheap illuminance sensor by modeling measured- and actual-illuminance using quadratic polynomial approximation. The relation between PWM(Pulse Width Modulation) duty ratio and illuminance intensity is modeled by a linear model. Illumination of the LED stand is controlled by estimating the difference of required illumination and the estimated ambient illumination. The developed LED stand has reduced electric energy consumption compared with a conventional manually controlled LED stand with the same lighting source. In addition, human subject evaluation shows that the LED stand, which is applied the proposed method, is more satisfactory than conventional ones since the proposed automatic controlled illumination produce more accurately required lighting and it is convenient.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.704-715
• /
• 2016

In this paper, we explore a low-complex bandwidth allocation (BA) scheme with multi-level service guarantees in VLC-OFDM systems. Effective capacity theory, which evaluates wireless channel capacity from a novel view, is utilized to model the system capacity under delay QoS constraints of the link layer. Since intensity modulation of light is used in the system, problems caused by frequency selectivity can be neglected. Then, the BA problem can be formulated as an integer programming problem and it is further relaxed and transformed into a concave one. Lagrangian formulation is used to reformulate the concave problem. Considering the inefficiency of traditional gradient-based schemes and the demand for distributed implementation in local area networks, we localize the global parameters and propose a quasi-distributed quadratic allocation algorithm to provide two-level service guarantees, the first level is QoS oriented, and the second level is QoE oriented. Simulations have shown the efficient performance of the proposed algorithm. The users with more stringent QoS requirements require more subcarriers to guarantee their statistical delay QoS requirements. We also analyze the effect of subcarrier granularity on the aggregate effective capacity via simulations.