• Korean Journal of Plant Resources
• /
• v.7 no.2
• /
• pp.137-141
• /
• 1994

In order to establish utilijzation of medicinal herb as vegetable by Hydroponics, the present studies were conducted to investigate the effect of temperature and light on the seed germination ofmedicinal herb. The results obtained are summaried as follows. The lower and upper temperaturelimit for herb germination was 10'c and 30'c within which the optimum was 20'C. Germinationof medicinal herb was similar in light and dark condition.

• Natural Product Sciences
• /
• v.2 no.2
• /
• pp.90-95
• /
• 1996

When reserpine-producing cell strains of Rauwolfia serpentina were transferred from the dark to the light irradiation, the production of reserpine was extremely enhanced whereas the cell growth was suppressed. In an incubation period of 20 days, the most effective culture condition for reserpine production was the combination of 8 days of dark culture and following 12 days of light culture. The time courses of both cell growth and reserpine production were measured in vitro in order to clarify the effect of wave length range of light on the biosynthesis of reserpine. Although the growth of cultured cells which had been incubated under continuous red, yellow, and green lights, respectively, was similar to that of the cultured cells subcultured in the dark. The cells cultured under red light irradiation produced less reserpine than dark-grown cultures. Both blue and near-ultraviolet light inhibited the growth of cultured cells. The production of reserpine was strikingly enhanced by blue light, but was strongly inhibited by near-ultraviolet light.

• Journal of Photoscience
• /
• v.10 no.1
• /
• pp.157-164
• /
• 2003

Light exerts two primary roles in plant growth and development. Plants acquire all biochemical energy required for growth and propagation solely from light energy via photosynthesis. In addition, light serves as a medium through which plants recognize environmental fluctuations, such as photoperiod and presence of neighboring animals and plants. Plants therefore constantly monitor the direction, intensity, duration, and wavelength of environmental light and integrate these light signals into the intrinsic regulatory programs to achieve an optimized growth in a given light condition. Although light regulates all aspects of plant growth and developmental aspects, the molecular mechanisms and signaling cascades involved have not been well established until recently. However, recent advances in genetic tools and plant transformation techniques greatly facilitated the elucidation of molecular events in plant photomorphogenesis. This mini-review summarizes the gist of recent findings in deetiolation and suppression of shade avoidance response as classic examples of the phytochrome-mediated photomorphogenesis.

• Journal of Life Science
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2018

Light is essential to the growth and development of plants, and it is perceived by phytochromes, which are one of the photoreceptors that regulate physiological responses in plants. Ethylene regulates the dormancy, senescence, growth, and development of organs in plants. This research focused on the interaction of phytochromes and ethylene to control hypocotyl growth and gravitropism using phytochrome mutants of Arabidopsis, phyA, phyB, and phyAB, under three light conditions: red (R) light, farred (FR) light, and white light. The mutant phyAB exhibited the most stimulation of gravitropic response of all three phytochrome mutants and wild type (WT) in all three light conditions. Moreover, phyB in the R light condition showed more negative gravitropism than phyA. However, phyB in the FR light condition showed less curvature than phyA. The hypocotyl growth pattern was similar to the gravitropic response in several light conditions. To explain the mechanism of the regulation of gravitropic response and growth, we measured the ethylene production and activities of in vitro ACS and ACO. Ethylene production was reduced in all the mutants grown in white light in comparison to the WT. Ethylene production increased in the phyA grown in R light and phyB grown in FR light in comparison to the other mutants. The ACS activity coincided with the ethylene production in the phyA and the phyB grown in R light and FR light, respectively. These results suggest that the Pfr form of phyB in R light and the Pr form of phyA in FR light increased ethylene production via increasing ACS activity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.151-161
• /
• 2013

An active power factor correction (PFC) circuit is presented which employs a newly proposed input voltage sensor-less control technique operated in continuous conduction mode (CCM) and critical conduction mode (CRM). The conventional PFC circuit with input voltage sensor-less control technique degrades the power factor (PF) under the light load condition due to DCM operation. In the proposed PFC circuit, the switching frequency is basically 70KHz in CCM operation. In light load condition, however, the PFC circuit operates in CRM and the switching frequency is increased up to 200KHz. So CCM/CRM operation of the PFC circuit alleviates the decreasing of the PF in light load condition. The proposed PFC controller IC has been implemented in a $0.35{\mu}m$ BCDMOS process and a 240W PFC prototype is built. Experimental results shows the PF of the proposed PFC circuit is improved up to 10% from the one employing the conventional CCM/DCM dual mode control technique. Also, the PF is improved up to 4% in the light load condition of the IEC 61000-3-2 Class D specifications.

• Tribology and Lubricants
• /
• v.17 no.6
• /
• pp.482-489
• /
• 2001

Changes in light transmission characteristics caused by various types of oil contaminations were experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon duct, two kinds of solutions and grease were used for the test contaminants in this work. Light intensity of the transmitted light was measured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and poly-meric fibers in terms of the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change in lubricating oils.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.145-150
• /
• 2015

We introduce a new method of time-division visible light communication (VLC) using LED lamp light for the generation of synchronizing pulses. The LED lamp, driven by an AC 220-V power line, radiates light that has a 120-Hz frequency component. The pulse generator in each VLC system receives the LED lamp light and generates the synchronizing pulses that are required for time-division transmission of multiple VLC channels. The pulse period is subdivided into several time slots for VLC channels. In experiments, 120-Hz synchronizing pulses were generated using LED lamp light, and three VLC channels were transmitted independently without interfering with each other in a condition where the VLC signals overlapped in space. This configuration is useful in constructing multiple wireless sensor networks that are safe and without interference in locations where LED lamps are used for illumination.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.287-298
• /
• 2001

Change in light transmission characteristics caused by various types of oil contaminations was experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon dust, two kinds of solutions and grease were used for the lest contaminants in this work. Light intensity of the transmitted light was treasured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and polymeric fibers mainly due to the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change iii lubricating oils.

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1420-1425
• /
• 2008

This study was conducted to investigate the fermentation characteristics of cheonggukjang prepared with soybean germinated under light condition. The moisture content and pH of cheonggukjang made with soybean germinated under light condition (CGL) were higher than that of cheonggukjang made with non-germinated soybean (CNG). The color of CGL was darker than that of CNG and cheonggukjang made with soybean germinated under dark condition (CGD). The number of live bacteria in the CGL ($10.7{\pm}0.3\;\log\;CFU/g$) and CGD ($10.7{\pm}0.4\;\log\;CFU/g$) was higher than that of CNG ($9.7{\pm}0.4\;\log\;CFU/g$). The levels of isoflavone in CGL, CGD and CNG were 2,038.0, 1,993.6 and 1,747.0 ug/g, respectively. There were no significant differences in the appearance, aroma, taste and overall acceptability of the cheonggukjang made with different germination conditions. Therefore, it was expected that the cheonggukjang prepared with soybean germinated under light condition could be practically used as a new fermented food.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.2
• /
• pp.26-41
• /
• 2020

In order to culture a life for the physiological and ecological research of the meiofauna, this study aimed to identify the most ideal condition in which the meiofauna can be cultured within a laboratory by setting various environmental conditions. The sediment deposits and seawater were collected from the intertidal zone in Mallipo of the west coast. A aquarium in which the internal environment can be controlled by constantly maintaining the temperature and humidity was fabricated and the culture experiments of the collected meiofauna were conducted together with the sea water and sediment deposits collected. The experiment 1 was conducted after establishing the similar environment as the collecting location. Under the same condition as the experiment 1, the experiment 2 verified a difference between when live foods were supplied and were not. In the experiment 3, the changes in the meiofauna colony were checked according to with or without light and live foods. In the results of culturing experiments, the habitat density and the number of appeared classification groups of the meiofauna colony were relatively higher both in the water tank with supplying the live foods and under the condition of having light in 12-hour cycle than those in the aquarium without live foods and under no light condition. In addition, the habitat density of meiofauna cultured within a laboratory exhibited relatively higher value than that under the natural state.