• Journal of Ginseng Culture
• /
• v.3
• /
• pp.1-10
• /
• 2021

Panax ginseng (Ginseng or Korean ginseng) is one of the most important medicinal herbs in the world. We made a high-quality whole genome sequence of P. ginseng using 'Chunpoong' cultivar, which is the first cultivar registered in Korea Seed and Variety Service (KSVS) with relatively similar genotypes and superior phenotypes, representing approximately 3 Gbp and 60,000 genes. Genome sequence analyses of P. ginseng and related speciesrevealed the origin of Korean ginseng and the ecological adaptation of 18 Panax species around the world. Korean ginseng and American ginseng (P. quinquefolius) are tetraploid species having 24 chromosome pairs, while the other 16 species are diploid species with 12 chromosome pairs. Panax and Aralia are the closest genera belonging to the Araliaceae family that diverged approximately 8 million years ago (MYA). All Panax species evolved as shade plants adapting to cool climates and low light conditions under the canopy of deep forests from Southeast Asia such as Vietnam to Northeast Asia such as Russia approximately 6 MYA. However, through recurrent ice ages and global warming, most diploid Panax species disappeared due to the freezing winter, while tetraploid P. ginseng may have appeared by allotetraploidization, which contributed to the adaptation to cold temperaturesin Northeast Asian countries including the Korea peninsula approximately 2 MYA. American ginseng evolved by the adaptation of P. ginseng in Northeast America after the intercontinental migration 1 MYA. Meanwhile, most of diploid Panax species survived in high-altitude mountains over 1,600 meters in Southeast Asia because they could not endure the hot temperature and freezing cold. The genome sequence provides good basisto unveil the origin and evolution of ginseng and also supports practical gene chips which is useful for breeding and the ginseng industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1754-1760
• /
• 2007

To improve poor dye uptake of safflower yellow colorants, cellulose fibers were pretreated with chitosan. The effect of chitosan pretreatment on the dyeability of safflower yellow colorants to cotton, ramie, and rayon was investigated in terms of dye uptake, color, and colorfastness. Irrespective of fiber types, dye uptake increased continuously with increase in chitosan concentration. Chitosan pretreatment improved dye uptake up to 5.6 times for cotton, 7.2 times for ramie, and 3.7 times for rayon. For cotton and ramie, the shade of dyed fabric changed YR color to Y color with increase in chitosan concentration. Dyed rayon fabrics showed Y color irrespective of chitosan concentration. Shades got darker and deeper with increasing chitosan concentration. Shades of chitosan pretreated fabrics were shifted differently depending on dyeing temperature within same fabrics. In common, the color of all dyed fabrics changed to YR at 50 and $70^{\circ}C$ while Y color at 30 and $90^{\circ}C$. V and C value decreased with increase in dyeing temperature and resulted in darker and duller color, in general. Light fastness was fair while washing fastness was poor. It was confirmed that ultrasonic dyeing method enhanced dye uptake more than 30% for cotton and ramie fabrics compared to the conventional automatic machine dyeing method. However, no difference in dye uptake between two dyeing methods was found for rayon.

• Journal of Plant Biotechnology
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1999

Large-scale cultures of plant cell, tissue, and organ have been achieved by using BTBB. When different sized BTBBs (5 L, 20 L, 100 L, 300 L, and 500 L) were tested for the culture of yew cells (Taxus cuspidata Sieb. et Zucc.), cell growth increment reached to 94.5% in SCV after 24 days of culture with 30% of inoculation cell density. However, there were some variations in the production of taxol and its derivatives among the BTBBs of different size. Approximate 4 ㎎/l of taxol and 84 ㎎/l of total taxanes were obtained by using a 500L BTBB after 6 weeks of culture. With a 20L BTBB, about 20,000 cuttings of virus-free potatoes (cv. Dejima) could be obtained by inoculating 128 explants and maintaining 8 weeks under 16 hr light illumination. The frequency of ex vitro rooting of the cuttings revealed as more than 99% under 30% shade. By incorporating two-stage culture process consisting of multiple bulblet formation in solid medium and bulblet development in liquid medium, mass propagation of lily through bioreactor seemed to be possible. In the case of 'Marcopolo', the growth of mini-bulblets in BTBB was nearly 10 folds faster than that of the solid medium. Time course study revealed that maximum MAR yield of ginseng (Panax ginseng C. A. Meyer) in a 5 L and 20 L BTBB after 8 weeks of culture was 500 g and 2.2 ㎏, respectively. By cutting the MAR once and/or twice during the culture, the yield of root biomass could be increased more than 50% in fresh weight at the time of harvest. With initial inoculum of 500 g of sliced MAR in a 500 L BTBB, 74.8 ㎏ of adventitious root mass was obtained after 8 weeks of culture. The average content of total ginseng saponin obtained from small-scale and/or pilotscale BTBBs was approximately 1% per gram dry weight. Based on our results, we suggest that large-scale cultures of plant cell, tissue, and organ using BTBB system should be quite a feasible approach when compared with conventional method of tissue culture.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.45-59
• /
• 2019

The characters that could be connected to diverse cultural contents have formed diverse platforms with the development of digital technology, and the size of the relevant industry and market is rapidly growing. Recently, the utilization of character emoticons for smartphone messenger has been rapidly increased, so that the characters are settled down as a tool for non-verbal communication, on top of drawing attention as an independent area. With the expansion of character market, the importance of design that could give interest and familiarity to consumers is more emphasized. The body proportion of characters includes the implicative and symbolic meanings that could express diverse personalities. Thus, this study examined the body proportion of the characters with the high consumers' preference, and then analyzed the characteristics of formative elements of character design in accordance with the body proportion. In the results of the analysis, the exaggerated form of SD characters in two or three-head figure, and the realistic Real characters in seven or eight-head figure were preferred. For the SD characters, the colors with a high chroma showing the cute and cheerful image were used. For the Real characters, the cubic effect was expressed through the colors with active images and the light and shade of color. Even though the SD characters have limited motions due to the omitted body parts, the facial movements of animation characters are exaggerated while the Real characters describe the realistic and dynamic motions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.505-510
• /
• 2014

This research investigated growth of ginseng regard to sunshade materials and micro metrological phenomena under the sunshade material to product high quality ginseng. Followings are results of investigation of active ingredient from raw ginseng producted under the sunshade materials. The highest temperature under the sunshade material from June to August was measured from a Three-layered blue and one-layered black polyethylene net (TBOBFN) followed by a aluminium-coated polyethylene sheet (ACPS) and blue polyethylene sheet (BPS). The highest light penetration of $381.7{\mu}mol/s/m^2$ was obtained from the BPS at August, also the temperature was highest at the ginseng field. Growth of above ground part of 2~3 year old ginseng under the ACPS was the highest, followed by the ACPS and the BPS. In case of 4 year old ginseng, the ACPS and the BPS was the same, followed by the TBOBPN. Root length and diameter of 2~3 year old ginseng showed difference among treatments, but 4 year old ginseng was not showed difference. Meanwhile, the highest amount of root of 4 year old ginseng of $896g/m^2$ was obtained from ACPS. The total amount of ginsenocide of 4 year old ginseng under the ACPS was highest, followed by the BPS and the TBOBPN. Chromaticity of ginseng root under the TBOBPN was highest, followed by the ACPS and the BPS.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.542-549
• /
• 2007

The purpose of this study was to evaluate the difference in the surface roughness after polishing and to evaluate the difference in color stability after immersion in a dye solution among four types of composite resin materials. Four light-polymerized composite resins(Shade A2) with different sized filler content(a nanofilled, a hybrid, a microfilled, a flowble) were used. Average surface roughness (Ra) was measured with a surface roughness tester (Surftest Formtracer) before and after polishing with aluminum oxide abrasive discs(Super-Snap). Color of specimens before and after staining with 2% methylene blue solution were measured using spectrophotometer(CM-3700d) with SCI geometries. The results of Ra and ${\Delta}E$ were analyzed by one-way analysis of variance(ANOVA), a Scheffe multiple comparison test and Student t-test(p=0.05). After polishing, Ra values were decreased regardless of type of composite resins. In surface roughness after polishing and color stability after staining, nanofilled composite resin was not different with other composite resins except flowable resins.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2010

This experiment was conducted to investigate the effect of greenhouse orientation on the greenhouse environment and the growth and yield of tomato cv 'Momotaro-Yoku' in forcing culture. The photosynthetic phpton flux density (PPFD) of a.m was higher in north-south orientation than that in east-west orientation and it was opposed in the p.m. Mean PPFD of a day was higher in east-west orientation than that in north-south orientation because the light transmitting area became larger in east-west orientation with decrease of incidence angle. The PPFD at 60 cm point above ground of all furrows was poor due to shadows near plants and it was higher in north-south orientation than that in east-west orientation. The air temperature in the greenhouse was higher in east-west orientation than that in north-south orientation but there was no significant difference since mid February as solar altitude goes up. The soil temperature was some higher in east-west orientation than that in north-south orientation and there was not significant difference among ridges. In east-west orientation, as ripening was promoted, high early yield of tomato were obtained. So total yield was greater about 8% in east-west orientation than that in north-south orientation. Therefore, it was considered that east-west orientation is more advantageous than north-south orientation for forcing culture of tomato.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.199-207
• /
• 2009

The objective of this study was to evaluate the effect of color measuring instrument by measuring the color of dental composite resins. Nine shade light cured composite resin disks were prepared (diameter : 15 mm, thickness : 4 mm). CIE $L^*a^*b^*$ color scale of each disk was measured with 3 different types of spectrophotometer [MiniScan XE plus (Model 4000S, Hunter Lab, USA), CM-3500d (Minolta, Japan) and Specbos 2100 Miniature VIS Reflection spectrometer (Serial No: 319416, JETI Technishe VIS Instrumentic GmbH. Germany)]. Miniscan XE Plus and CM-3500d using identical measuring geometry with different size of viewing aperture. But Specbos 2100 using different measuring geometry. Within the limitation of this study, there were color difference (${\Delta}E^*$) from 2.4 to 7.8 between Miniscan XE Plus and CM-3500d, but $L^*$, $a^*$, $b^*$ values showed the high correlation. However, there were great color difference (${\Delta}E^*$) in the extent of about 20 between instruments with the different measuring geometry. Therefore, color scale measured by color measuring instrument should be used as a relative value rather than an absolute value in the field of dentistry.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.86-94
• /
• 1994

This study was carried out to get information on the cause of low photosynthesis ofKorean ginseng, a shade plant. Photosynthesis, water content, stomatal conductance and water potential in leaves of ginseng and soybean were investigated. The light intensity for maximum photosynthesis was about $300{\mu}E\;/\;m^2\;/\;s^2$ in ginseng and about $800{\mu}E\;/\;m^2\;/\;s^2$ in soybean, respectively Photosynthesis was remarkably lower in ginseng than in soybean under the same light intensity and $temperature(at\;20^{\circ}C)$. Photosynthesis of detached leaves was stopped in shorter time in ginseng than in soybean particularly at high $temperature(30^{\circ}C)$. The decreasing rate of water content in detached leaves was slower in ginseng than that of soybean, while the remained water level in the leaves was much higher in $ginseng(70{\sim}71%)\;than\;in\;soybean(50{\sim}53%)$ when photosynthesis was stopped. Water content had a positive correlationwith photosynthesis in both plants. However, at the same water level, the ratio of photosynthesis to water content was remarkably lower in ginseng than In soybean. The relationship between the stomatal conductance and photosynthesis was significantly positive correlation in the both plants. The ratio of photosynthesis to stomatal conductance was similar in booth plants below about 40 $mmol\;/\;m^2\;/\;s\;at\;20^{\circ}C$. Water potential was remarkably lower in ginseng than in soybean, and waterpotential had a significantly positive correlation with water content, stomatal conductance and photosynthesis in both plant. These results suggested that the low stomatal conductance and low water potential might cause the low photosynthesis in ginseng compared to soybean.

• Conservation Science in Museum
• /
• v.30
• /
• pp.71-88
• /
• 2023

This paper examined the visible characteristics and chemical composition of glass beads from the Joseon Dynasty as well as the associations thereof. It also explored the characteristics and uses of glass beads by region. This study covered a total of 1,819 pieces excavated from 25 locations in the Gyeonggi, Chungcheong, and Gyeongsang regions, of which 537 pieces were analyzed for their chemical composition. Glass beads of the Joseon Dynasty take a variety of shapes such as a Round, Coil, Floral, Segmented, Flat, Oval, and Calabash. Colors vary from shades of brown (brown, lemon yellow) and shades of blue (Bluish-Green, greenish-Blue, Purple-Blue) to shades of white (colorless, white) and shades of green (Green, Greenish-Blue, Greenish-Brown). Brown accounts for the largest percentage, followed by Bluish-Green, greenish-Blue. It was identified that Drawing technique was the most common glass bead production technique of the Joseon Dynasty. Potassium oxide (K₂O) was the most common flux agent for glass beads, while the potash glass and mixed alkali glass groups account for the largest quantity. The choice of stabilizers depended on the type of flux agents used, but the most common were calcium oxide (CaO) and aluminum oxide (Al₂O₃). The potash glass and potash lead glass groups are high in CaO and low in Al₂O₃, the mixed alkali glass group is high in CaO, and the lead glass group is low in CaO. In terms of the association between color and shape, most of the beads with shade of brown and blue have round shapes of brown and blue have spherical shapes, while the coil shape is prominent in blue beads. A high percentage of green and colorless beads also take the shape of a coil, while white beads in general have a floral shape. In terms of the association between shape and chemical composition, round, floral and segmented shapes account for a high percentage of the potash glass group, while coil and flat shapes are common in the mixed alkali glass group. This paper also analyzed the colorants for each color based on the association between color and chemical composition. Iron (Fe) was used as the colorant for brown and white, and titanium (Ti) and iron were used for light yellow. Purple-Blue was produced by by cobalt (Co), and greenish-Blue, Bluish-Green, green, Greenish-Blue were produced by iron and copper (Cu). Colorless beads had a generally low colorant content.