• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.

• Journal of Welding and Joining
• /
• 제1권2호
• /
• pp.61-68
• /
• 1983

Austenitic stainless steel has been investigated widely for creep strength of heat resistant material and effects of grain sizes due to various solution treatment time under constant temperature. It was studied that effects of grain sizes subject to solution treatment temperature 1100.deg. C, 1125.deg. C, 1175.deg. C, 1250.deg C, and 1300.deg. C respectively on the creep strength, fracture behaviour and fractography of SUS 316 stainless steel. The experimental results obtained were as follows. 1. The optimum grain size for the maximum creep strength did not vary with creep testing temperatures and stress levels. 2. Among various grain sizes due to different solution treatment temperature, the optimum grain size for the creep strength was found 0.044mm. Also the size showed the minimum initial strain regardless creep temperature. 3. Garofalo's equation of creep rupture life was applied well to SUS 316 stainless steel. 4. The fractography of optimum size was ductile intergranular fracture of dimple type and showed along with the increase of grain size intergranular fracture of w type.

• Journal of the korean society of oceanography
• /
• 제39권4호
• /
• pp.222-233
• /
• 2004

Using nitrogen as the limiting nutrient, the default version of a microplankton-detritus model linked chlorophyll concentration to the autotroph nitrogen. However, phosphorus dynamics were added to simulate the results of a microcosm experiment. Using standard parameter values with a single value of microheterotroph fraction in the microplankton taken from the observed range, the best simulation successfully captured the main features of the time-courses of chlorophyll and particulate organic carbon, nitrogen and phosphorus, with root-mean-square error equivalent to 29% of particulate concentration. A standard version of microbiological model assumes complete internal cycling of nutrient elements; adding a term for ammonium and phosphate excretion by microheterotrophs did not significantly improve predictions. Relaxing the requirement for constant microheterotroph fraction resulted in an autotroph-heterotroph model AH, with dynamics resembling those of a Lotka-Volterra predator-prey system. AH fitted the microcosm data worse than did MP, justifying the suppression of Lotka-Volterra dynamics in MP. The paper concludes with a discussion of possible reasons for the success of the simple bulk dynamics of MP in simulating microplankton behaviour.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.334-339
• /
• 2005

An instrument using thermal probe method was designed to measure thermal conductivity of liquid and solid foods. Thermal conductivity probe was designed with diameter to length ratio of 100 and diameter of 0.51 mm to minimize axial flow effect on thermal conductivity measurement. Thermal conductivities of distilled/deionized water, glycerin, and beef frankfurter meat were measured at $20-80^{\circ}C$. Mean thermal conductivity values of water showed less than 2.0% difference from several reference values without using time correction factor or probe calibration constant. For glycerin, difference was less than 0.7% from reference values at $20-50^{\circ}C$. Mean values of thermal conductivity for beef frankfurter meat ranged from 0.389 to $0.350\;W/m{\cdot}K$ at $20-80^{\circ}C$.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.251-258
• /
• 1999

The vibration control of bridge is studied considering the vibration characteristics of the Korean-type high-speed railway bridge. Fast nonlinear analysis is adopted as time integration method and the bridge and the train are modeled by FEM and sequentially moving constant forces respectively. Additional damping mechanism is indispensable to the Korean-type high-speed railway bridge because resonance vibration is excited under the maximum design speed. The optimal position and capacity of the damper is studied through the parametric studies, Transient vibration of the bridge is effectively controlled by such additional dampers which means that dampers play a role as structural damping. And also the maximum response of the bridge is reduced. Therefore it is verified that the increase of expected service life and the improvement of serviceability can be obtained through dampers.

• Bulletin of the Korean Chemical Society
• /
• 제7권1호
• /
• pp.36-38
• /
• 1986

The Ferricyanide-sensing electrodes were prepared with $Ag_2S\;and\;Ag_3Fe(CN)_6$ (mole ratio 3:1-7:1). The 5:1 $(Ag_2S:Ag_3Fe(CN)_6)$ composition is superior to others in terms of potentiometric response, rapidity of response and reproducibility. Testing was done over the concentration range $10^{-1}M{\sim}10^{-6}M\; Fe(CN)_6^{3-}$ at pH 6.8 with constant ionic strength. The concentration-potential curve was linear and coincided with the Nernstian slope (19.7 mV/decade). Interfering ions were $I^-,\;Br^-,\; SCN^-\;and\;Fe(CN)_6^{4-}$ and the life time of this electrode was 3 weeks. This electrode could be used as the indicator electrode for measuring the ferricyanide and ferrocyanide.

• The Plant Pathology Journal
• /
• 제31권3호
• /
• pp.219-225
• /
• 2015

The primary step for efficient control of viral diseases is the development of simple, rapid, and sensitive virus detection. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) has been used to detect viral RNA molecules because of its simplicity and high sensitivity for a number of viruses. RT-LAMP for the detection of Potato virus X (PVX) was developed and compared with conventional reverse transcription polymerase chain reaction (RT-PCR) to demonstrate its advantages over RT-PCR. RT-LAMP reactions were conducted with or without a set of loop primers since one out of six primers showed PVX specificity. Based on real-time monitoring, RT-LAMP detected PVX around 30 min, compared to 120 min for RT-PCR. By adding a fluorescent reagent during the reaction, the extra step of visualization by gel electrophoresis was not necessary. RT-LAMP was conducted using simple inexpensive instruments and a regular incubator to evaluate whether RNA could be amplified at a constant temperature instead of using an expensive thermal cycler. This study shows the potential of RT-LAMP for the diagnosis of viral diseases and PVX epidemiology because of its simplicity and rapidness compared to RT-PCR.

• 산업진흥연구
• /
• 제1권2호
• /
• pp.121-128
• /
• 2016

Cultural heritage means a great lot to a nation's social system and its people's behavior consciousness and plays an important role in its self-development and improvement. It is essential for a nation's self-education and renewal. Improper cultural heritage will be disastrous because it may fall a nation into a loss of terrible chaos. Only the proper cultural heritage can make it always self-awaking, self-correcting and remaining vital in life. This paper, from the perspective of Choi Bu's Pyohaerok, makes a thorough analysis of the unbalance heritage of Chinese ancient culture for thousands of years. For example, many fine traditions gradually vanished in our actual life or only take half their life in heritage nowadays, such as our ancient broad and profound Confucian etiquette, ancient exquisite brocade art and architecture, ancient advanced ship-building technology and many other advanced numerous technological inventions; however, too much unwanted cultural rubbish keeps constant prevailing and takes repeated successions in the life, such as the heavy-form-and-light-content management mode, borrowing power to do evil, neglecting technological inventions long time and generally believing in ghost theory,etc.. This paper mainly focuses on the partial successions of the bad cultural heritage and its bad influence on the country, and concludes that it is just that that makes the country more and more backward. Therefore, the paper makes some pondering over these issues and proposes some related ideas of country-building to attract others participation to deal with them.

• 대한금속재료학회지
• /
• 제46권3호
• /
• pp.118-124
• /
• 2008

Abstract: A minimum commitment method(MCM) was applied to predict the long-term creep rupture life for type 316LN stainless steel(SS). Lots of the creep-rupture data for the type 316LN SS were collected through world-wide literature surveys and the experimental data of KAERI. Using these data, the long-term creep rupture life above ${10}^5$ hour was predicted by means of the MCM. In order to obtain the most appropriate value for the constant A being used in the MCM equation, trial and error method was used for the wide ranges from -0.12 to 0.12, and the best value was determined by using the coefficient of determination, $R^2$ which is a statistical parameter. A suitable value for the A in type 316LN stainless steel was found to be at -0.02 ~ -0.05 ranges. It is considered that the MCM will be superior in creep-life prediction to commonly-used timetemperature parametric method, because the P(T) and G($\sigma$) functions are determined from the regression method based on experimental data.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권7호
• /
• pp.952-959
• /
• 2010

This study was conducted to evaluate growth, behavior and carcass traits of fattening Hanwoo (Korean native cattle) steers managed in different group sizes. A total of 48 animals, 6 months of age, were allocated to one of three group sizes and the experiment was conducted from 12 to 30 months of age. Groups were balanced for weight and the group sizes consisted of 4, 8, or 12 steers which were named 4sG, 8sG and 12sG, respectively. When animals were 12 months of age, initial fasted body weight (BW, $304.51{\pm}12.40\;kg$) was measured. All animals were housed at a constant space allowance of $8.82\;m^2$ per animal, and a feeder and drinker were provided per 4 animals. The whole fattening stage was divided into three phases: phase I (from 12 to 18 month of age), phase II (from 19 to 24 month of age), and phase III (from 25 to 30 month of age). Steers managed in 12sG showed low (p<0.05) growth rate and feed conversion rate (FCR) in phase I and phase II when compared to other treatment groups. However, this difference was not observed for the whole fattening phase (p>0.05). Steers managed in 4sG had a thick (p<0.05) ultrasound back fat thickness at 15 and 18 months of age. However, group size had no effect on meat yield and quality traits of area and marbling score. Animals managed in 8sG yielded a better meat grade of "A" than the "B" grade in other treatment group sizes. Lean color, fat color, firmness and maturity scores did not differ among group sizes. Hanwoo steers housed under 12sG spent less time on eating concentrate, relevant higher eating rate, less frequency of allogrooming, and more time on walking (p<0.05). It could be concluded that a large group size retarded growth rate and back fat thickness in the fattening stage, which was mainly focused on 15 and 18 months of age.