• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.193-209
• /
• 1992

We consider a Step Life Testing which is deviced for a two-component serial system with the considerably long life time. In the modelling stage we discuss the bivariate exponential distribution suggested by Block and Basu as the bivariate survival function for the two-component system, and develope the cumulative exposure model introduced by Nelson so that it can be used under the bivariate function. We consider inference on the component life time when the components are at work in the system by combining the information from system life test and that from the component tests carried out separately under the controlled environment. In data analysis, maximum likelihood estimators are discussed with the initial value obtained by an weighted least square method. Finally we discuss the optimal time for changing the stress in the simple step stress life testing.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.241-248
• /
• 2021

High cycle fatigue life for the cables with two different types of clamps is estimated comparatively through acceleration testing. The high cycle fatigue fracture of overhead lines is caused mainly by the aeolian vibration which is induced by vortex shedding. It is necessary to manage the integrity of cables continuedly considering that the aeolian vibration is unavoidable since it occurs in steady and relatively low wind velocity. Two types of clamps which are largely used for overhead lines of the distribution grids are selected and failure data are obtained by step stress testing with a electrodynamic shaker with them. The inverse power law is assumed to describe the stress-life relationship and the fatigue limit at any specified life is supposed to follow Weibull distribution. The life of the cable is defined as the number of cycles to the time that one of strands is completely broken. Finally, the fatigue limits of the cables with two clamp types are estimated at the reference life of 500 Mcycles and compared each other based on a bending vibration amplitude.

• Journal of Applied Reliability
• /
• v.5 no.4
• /
• pp.413-425
• /
• 2005

As an alternative to traditional life testing, degradation tests can be effective in assessing product reliability when measurements of degradation leading to failure can be observed. This article presents an accelerated degradation testing for vacuum fluorescent displays (VFDs). The accelerated degradation model is based on Arrhenius-lifetime relationship for cathode temperatures. We compare the results between accelerated degradation test and test at normal use condition. Accelerated degradation test for display devices is observed as an efficient method to warrantee product reliability to customers, as well as a tool to save time and costs.

• Computers and Concrete
• /
• v.19 no.1
• /
• pp.111-120
• /
• 2017

This study aimed to design the accelerated life testing (ALT) of concrete, which stimulating the special natural environment maximumly. Its evaluation indexes, such as dynamic elastic modulus, mass and ultrasonic velocity were measured, and the variation of relative mass and relative dynamic elastic modulus of concrete were studied. Meanwhile, the microanalysis method was used. Moreover, an exploratory application of the stochastic approach, the Weibull distribution and the lognormal distribution, were made to assess the durability of concrete structures. The results show that the ALT for simulating natural environment is more close to the service process of concrete structure under actual conditions; The relative dynamic elastic modulus can be used as the dominant durability evaluation parameters, because it is more sensitive to the environmental factors compared with the relative quality evaluation parameters; In the course of the concrete deterioration, the destruction of the salt freezing cycle is the dominant factor, supplemented by other factors; Both of those two stochastic approaches can be used to evaluate the reliability of concrete specimens under the condition of ALT; By comparison, The lognormal distribution method is better to describe the reliability process.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.75-81
• /
• 2017

PURPOSES : So far, aged cement concrete pavement on express highways has been rehabilitated mainly with asphalt concrete inlay. However, potholes were the major problem, and they shortened the life of the inlay mainly owing to the poor drainage of water once it infiltrated the interface of the concrete and asphalt. The purpose of this study is to compare the performance and economic efficiency of asphalt overlay and inlay. METHODS : Overlay and inlay were compared through accelerated pavement testing, and a life-cycle cost analysis was conducted in this study using the CA4PRS program. RESULTS and CONCLUSIONS : It was found from accelerated pavement testing that the overlay exhibited reflective crack resistance that was more than twice as effective as that of inlay. The total cost (construction cost + user cost) within the analysis period (20 years) of the overlay was 37% lower than that of the inlay.

• Journal of Applied Reliability
• /
• v.9 no.4
• /
• pp.275-290
• /
• 2009

This paper considers accelerated thermal degradation tests which are performed for rubber seal materials used for undersea tunnels constructed by immersion method. Three types of rubber seals are tested; rubber expansion seal, omega seal, and shock absorber hose. Main ingredient of rubber expansion seal is EPDM(Ethylene Propylene Diene Monomer) and that of both omega seal and shock absorber hose is SBR(Styrene Butadiene Rubber). The accelerated stress is temperature and an Arrhenius model is introduced to describe the relationship between the lifetime and the stress. From the accelerated degradation tests, dominant failure mode of the rubber seals is found to be the loss of elongation. The lifetime distribution and the service life of the rubber seals at use condition are estimated from the test results. The acceleration factor for three types of rubber seals are also investigated.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.419-432
• /
• 2011

제품의 신뢰성에 대한 소비자의 인식이 높아짐에 따라 기업에서는 높은 품질과 신뢰성 있는 제품을 만들기 위해 많은 노력을 하고 있다. 신뢰성은 기기, 부품, 재료 등 시스템이 규정된 조건하에서, 의도하는 기간 동안 규정된 기능을 고장 없이 수행할 수 있는 성질로 규정된다. 높은 신뢰성의 확보를 위한 제품의 신뢰성 시험은 많은 시간과 비용이 소모되기 때문에 현대의 빠른 시장 흐름에 따라가지 못한다. 특히, 최근 기술발전 속도가 빨라지고 제품 수명주기(Life Cycle)와 개발 기간이 짧아지고 있는 추세에 있으므로 이에 대응할 수 있는 신속한 시험방법의 실시가 반드시 필요한 시점이다. 위와 같은 신뢰성을 갖는 제품의 시험의 한계를 극복하고 시험시간을 단축하기 위한 여러 가지 방법이 연구되어 왔고, 그 중 가속 시험(Accelerated Test)에 대한 필요성과 요구가 계속 증가하고 있는 추세다. 본 연구에서는 단순부품과 재료의 신뢰도 정보를 신속하게 얻는데 매우 유용한 신뢰성 시험방법 중에 하나인 가속시험의 연구동향과 적용 현황을 분석하고 이의 효과적인 적용과 활용방안을 모색 하고자 한다.

• International Journal of Reliability and Applications
• /
• v.3 no.2
• /
• pp.91-98
• /
• 2002

A class of life distributions, whose mean residual life keeps stable at its earlier phase and then starts to decrease in time, is proposed to model the life of an element haying survived its burn-in. A strongly consistent estimator and a nonparametric testing procedure are developed to locate the occurrence of the change-point of the mean residual life. Finally, some numerical simulations are employed to be an illustration as well.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.976-984
• /
• 2006

Time-temperature superposition has been studied to determine the long-term fatigue life over millions of cycles for glassy polymers. π le superposition is supposed to make an accelerated lifetime testing (ALT) technique possible. Dog-bone shaped specimens made of carbon filled Polycarbonate (PC) were tested under fatigue, based on the stress-lifetime approach (S-N curve). Fatigue-induced localized yield-like deformation is considered as the defect leading to fatigue and its evolution behavior is characterized by a modified energy activation model in which temperature is considered as fatigue acceleration factor. This model allows the reduced time concept to account for effects of different temperature in short-term fatigue data to determine long-term fatigue life through the use of time-temperature superposition that is applicable under a low frequency and isothermal conditions. The experimental results validated that the proposed technique could be a possible method for accelerated lifetime testing (ALT) of time-dependent polymeric materials.

• Journal of Life Science
• /
• v.15 no.1 s.68
• /
• pp.45-48
• /
• 2005

The aim of this study was to construct a correct pedigree of miniature horses (MH). The sex of MH was detected by PCR amplification of the sex determining region of the Y chromosome gene (SRY) prior to parentage testing. Ten random MH samples for parentage testing were genotyped by using 16 micro satellite markers. Since the SRY band (430 bp) was detected in horses No.1, 2, 6, 7, 8, 9, 10, these are male. However, the DNA segment was not identified in horses No.3, 4, and 5, which therefore are female. After genotyping, parentage testing was performed according to Mendelian fashion and International Society for Animal Genetics (ISAG) guideline. Of the 10 MH, 3 were qualified by the compatibility of 16 markers according to Mendelian fashion in the present DNA typing for parentage verification. These results can provide basic information for developing parentage verification and an individual identification system in MH.