• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.141-141
• /
• 2003

전기-광 효과를 이용한 광변조기, 스위치 등의 소자 구현을 위해 고품질의 Ti:LiNbO$_3$ 광도파로 제작은 필수적이다. LiNbO$_3$ 광도파로는 양자교환(APE) 및 Ti 확산 법으로 제조할 수 있으며 전자의 경우 ne 는 증가, no는 감소되는 경향이 있어 편광도 파로의 제작에 용의하며 후자의 경우 ne 와 no 모두 증가하는 도파로 특성을 갖는다. 이러한, 도파로 소자의 특성 향상을 위해서는 Li out-diffusion 이 억제된 손실이 적은 도파로 제작이 필수적이다. 본 연구에서는 Ti 내부 확산법을 이용한 LiNbO$_3$ 광도파로를 확산분위기를 조건으로 하여 제작하였으며, 온도에 따른 각 이온의 반응 메커니즘에 관하여 관찰하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1782-1792
• /
• 1994

Ti : $LiNbO_3$ traveling-wave phase optical modulators at wavelength 1.3㎛ have been designed and fabricated, focusing on the optical waveguide and asymmetric coplanar electrode structure. To improve the phase-mismatch of traveling-wave ACPS electrode, the characteristic impedance, effective microwave index, and electrode loss have been presented as a function of geometric parameters including electrode and buffer layer thickness. Low-loss channel optical waveguides on $LiNbO_3$ were fabricated by the Ti diffusion method with $O_2$ water-vapor environment. $2.5{\mu}m$ thick electrode was successfully fabricated by double-spin image reversal process. Modulation bandwidth was limited by a resonance at 2.9 GHz and modulation bandwidth up to 2.5GHz was approxirnately measured.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.264-268
• /
• 1990

A guided-wave electro-optic Mach-Zehnder interferometric modulator was fabricated on X-cut LiNbO3 . The channel waveguides were formed by proton diffusion with self-aligned SiO2-cladding. A mach-Zehnder interferometric modulator with arm lengths of 7mm has been fabricated and tested at 0.6328${\mu}{\textrm}{m}$. Its modulation depth with V$\pi$ of only 3.5V was 85% and the 3dB bandwidth was 1.6KHz. For high speed operation, the electrode dimension should be reduced to have smaller R, L, and C.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.400-406
• /
• 1998

We investigated the preparation and guided-mode properties of $Ti:LiNbO_3$ waveguides which were fabricated by Ti in-diffusion. The diffusion method to reduce the Li out-diffusion was proposed. The optical guided-mode and propagation loss based on butt-coupling pigtailed with PMF-input were measured. How to improve the polishing grade of waveguide endfaces is newly proposed in this paper. To show the mode propagations, the BPM simulations of channel waveguide are described.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.739-745
• /
• 2014

We have demonstrated a $Ti:LiNbO_3$ electro-optic electric-field sensor utilizing a $1{\times}2$ Y-fed balanced-bridge Mach-Zehnder interferometric (YBB-MZI) modulator, which uses a 3-dB directional coupler at the output and has two complementary output waveguides. A dc switching voltage of ~25 V and an extinction ratio of ~12.5 dB are observed at a wavelength of $1.3{\mu}m$. For a 20 dBm rf input power, the minimum detectable electric fields are ~8.21, 7.24, and ~13.3 V/m, corresponding to dynamic ranges of ~10, ~12, and ~7 dB at frequencies of 10, 30, and 50 MHz respectively. The sensors exhibit almost linear response for an applied electric-field intensity from 0.29 V/m to 29.8 V/m.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.128-134
• /
• 2012

The performance evaluation and fabrication of integrated-optic electric-field sensor utilizing $Ti:LiNbO_3$ asymmetric Mach-Zehnder intensity modulator with a push-pull lumped electrode and a plate-type probe antenna to measure an electric field strength is described. The modulator has a small device size of $46{\times}7{\times}1\;mm$ and operates at a wavelength $1.3{\mu}m$. The devices are simulated based on the BPM software and fabricated utilizing Ti-diffused $LiNbO_3$ channel optical waveguides. The minimum detectable electric field is 1.02 V/m and 6.91 V/m, corresponding to a dynamic range of ~35 dB and ~10 dB at the frequencies of 500 KHz and 5 MHz, respectively.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.41-52
• /
• 2021

Recently, LNOI photonics technology has attracted attention as a photonics platform capable of integrating ultra-high-speed, low power consumption, and high nonlinearity optical devices, as it is possible to manufacture LiNbO₃ optical waveguides with ultra-low optical loss and a radius of curvature of several tens of micrometers. Here, we will briefly compare various photonics platforms, such as Si, InP, SiN, and LNOI, describe the current research trends of LNOI photonics, and discuss the direction of photonics technology at the conclusion.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.218-219
• /
• 2003

Wavelength Division Multiplexed (WDM)과 Time Division Multiplexed (TDM) 광 네트워크에서 전광 파장변환은 미래 초고속통신의 핵심 기술이다. 파장변환장치는 정보 소통량 관리에 유연성을 부여함과 동시에 광 네트워크의 동적 재구성을 용이하게 한다. 최근에 주기적 분극을 가진 LiNbO$_3$ 도파로를 이용한 몇몇 파장변환실험들이 성공적으로 수행됨으로써, Difference Frequency Generation (DFG)와 같은 2차 비선형 분극을 이용한 파장변환 장치에 대한 관심이 증대되고 있다. (중략)

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.72-78
• /
• 1998

Polarization mode converters have been produced by utilizing Ti:LiNbO$_{3}$ channel waveguide and strain-optic effect. Shear strain for periodic perturbations of optical channel waveguides and phase matching can be obtained by an evaporated periodic SiO$_{2}$ thin film at 300.deg. C. The electrodes located on the either side of waveguide provide a means to electro-optically tune the wavelength for maximum polarization conversion via the electrooptic effect. The maximum conversion effeciency was observed at 21.deg. C for V=0 and 46.deg. C for V=30V aro the device having 7 .mu.m waveguide wiith and 350 periodic pads. The dependence of the number of pads on conversion efficiency was observed experimentally.fficiency was observed experimentally.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.254-258
• /
• 2002

To realize channel cross-connecting in optical communications systems, a high speed optical matrix switch was fabricated using z-cut $LiNbO_3$. For switch fabrication was design bending structure and coupling length and four $2{\times}2$ directional couplers were integrated on one substrate far construction of a $4{\times}4$ switch. Single-mode optical waveguides were formed by Ti-diffusion at a wet $O_2$ atmosphere. Ti-diffusion profile, refractive index variation and waveguide morphology were analyzed by Prism coupler and optical microscopy, respectively.