• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.449-452
• /
• 2008

The building heights of big cities which charged with most space are 3-D information as relative vertical distance from ground control points, but they didn't know the heights using contour with maps as lose of skyline or building heights for downtown, practically continuously developed of many technology methods for implementation of 3-D spatial earth. So, For the view as stereos of variety earth form generated 3-D spatial and made terrain perspective map, 3-D simulated of regional and urban space as aviation images. In this papers, it composited geospatial informations and images by DEM generation, and developed and presented for techniques overlay of CAD data and photos captured at our surroundings uses. Particularly, The airborne LiDAR surveying which are very interesting trend have laser scanning sensor and determine the ground heights through detecting angle and range to the grounds, and then designated 3-D spatial composite and simulation from urban areas. Therefore in this papers are suggested ease selections on the users situation by compare as various simulations that its generation of 3-D spatial image by collective for downtown space and urban sub, and the implementation methods for more accurate, more select for the best images.

• Ecology and Resilient Infrastructure
• /
• v.6 no.1
• /
• pp.34-48
• /
• 2019

Naeseong Stream is a natural sand-bed river that flows through mountainous and cultivated area in northern part of Gyeongbuk province. It had maintained its inherent landscape characterized by white sandbars before 2010s. However, since then changes occurred, which include construction of Yeongju Dam and the extensive vegetation development around 2015. In this study, long-term monitoring was carried out on Naeseong Stream to analyze these changes objectively. This paper aims to provide a dataset of the investigation on channel morphology and vegetation for the period 2012-2018. Methods of investigation include drone/terrestrial photography, LiDAR aerial survey and on-site fieldwork. The main findings are as follows. Vegetation development in the channel of Naeseong Stream began around 1987. Before 2013 it occurred along the downstream reach and since then in the entire reach. Some of the sites where riverbed is covered with vegetation during 2014~2015 were rejuvenated to bare bars due to the floods afterwards, but woody vegetation was established in many sites. Bed changes occurred due to deposition of sediment on the vegetated surfaces. Though Naeseong Stream has maintained its substantial sand-bed characteristics, there has been a slight tendency in bed material coarsening. Riverbed degradation at the thalweg was observed in the surveyed cross sections. Considering all the results together with the hydrological characteristics mentioned in the precedent paper (I), it is thought that the change in vegetation and landscape along Naeseong Stream was mainly due to decrease of flow. The effect of Yeongju Dam on the change of the riverbed degradation was briefly discussed as well.

• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.41-48
• /
• 2023

This study was conducted to confirm the possibility of a new carbon stock in the Sejong National Arboretum, a major urban greenspace in Sejong-si. This study involved field and ground surveys of 1,336 trees, including 794 Pinus densiflora trees with a diameter at breast height (DBH) of above 5.5cm, which are the most planted in the Sejong National Arboretum, Chionanthus retusus 154 trees planted, Metasequoia glyptostroboides 216 trees, and Aesculus turbinata 172 trees as street trees. Measurements were performed from April to November. Based on the results of the survey, the carbon storage and annual carbon stock were calculated using the annual carbon stock estimation equation used in the forest carbon offset projects. As a result of comparing the carbon stock of the 12cm diameter class, which is the most distributed of four major trees, it was found in the order of C. retusus (0.0136tC/tree), P. densiflora (0.0126tC/tree), M. glyptostroboides (0.0092tC/tree), and A. turbinata (0.0076tC/tree). In addition, the field survey measurement data compared with terrestrial LiDAR measurement data for 20 trees showed a difference of 10.0cm in tree height and 1.7cm in diameter at breast height (p<0.05). In the future, additional carbon stock and annual uptake of other species planted in the arboretum are expected to promote the carbon uptake effect of the arboretum and contribute to the achievement of the national NDC. In the long term, it is also necessary to develop the carbon uptake factor of trees and shrubs mainly used to calculate the exact carbon uptake amount of trees mainly used in urban forests and gardens.

• Journal of Korea Water Resources Association
• /
• v.56 no.4
• /
• pp.235-243
• /
• 2023

Due to the revision of the River Act and the enactment of the Act on the Investigation, Planning, and Management of Water Resources, a regular bed change survey has become mandatory and a system is being prepared such that local governments can manage water resources in a planned manner. Since the topography of a bed cannot be measured directly, it is indirectly measured via contact-type depth measurements such as level survey or using an echo sounder, which features a low spatial resolution and does not allow continuous surveying owing to constraints in data acquisition. Therefore, a depth measurement method using remote sensing-LiDAR or hyperspectral imaging-has recently been developed, which allows a wider area survey than the contact-type method as it acquires hyperspectral images from a lightweight hyperspectral sensor mounted on a frequently operating drone and by applying the optimal bandwidth ratio search algorithm to estimate the depth. In the existing hyperspectral remote sensing technique, specific physical quantities are analyzed after matching the hyperspectral image acquired by the drone's path to the image of a surface unit. Previous studies focus primarily on the application of this technology to measure the bathymetry of sandy rivers, whereas bed materials are rarely evaluated. In this study, the existing hyperspectral image-based water depth estimation technique is applied to rivers with vegetation, whereas spatio-temporal hyperspectral imaging and cross-sectional hyperspectral imaging are performed for two cases in the same area before and after vegetation is removed. The result shows that the water depth estimation in the absence of vegetation is more accurate, and in the presence of vegetation, the water depth is estimated by recognizing the height of vegetation as the bottom. In addition, highly accurate water depth estimation is achieved not only in conventional cross-sectional hyperspectral imaging, but also in spatio-temporal hyperspectral imaging. As such, the possibility of monitoring bed fluctuations (water depth fluctuation) using spatio-temporal hyperspectral imaging is confirmed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.268-272
• /
• 2007

현재 시행되고 있는 하천정비와 하도정비는 하천 흐름의 특성을 간과한 채 일괄적으로 진행되어 왔으며 그 결과로 하천의 인공화는 지금까지 계속되고 있다. 이에 따라 하천 및 하도의 물리, 화학, 생물에 미치는 영향은 심각하며, 그 동안 인위적인 하천교란의 요인과 하천교란에 따른 영향, 즉 하상변동, 외래종 식생 침입, 생태서식처 변화 등의 정량적 평가 기술의 수립은 매우 미흡한 상태이다. 뿐만 아니라 하천 교란 극복을 위한 저감기술, 복원기술 및 적응관리 기술 또한 체계적으로 정리되지 못하여 하천과 댐 관리당국이 어려움을 겪고 있다. 이러한 상황을 극복하기 위해서는 하천 교란에 대항하는 회복관리 기술 개발을 위한 교란 평가 기술이 필요하다. 따라서 본 연구에서는 항공사진 및 GIS기법을 이용하여 국내 주요하천의 원인별 교란실태를 조사하고 분석함으로써 하천교란 조사기술 개발에 응용할 수 있는 방안을 제시하고자 하였다. 분석을 위하여 댐 하류의 하천교란 및 적응현장 시범지역을 선정한 후 대상 지역의 항공사진을 GIS화하여 하천 교란 실태를 분석하는 데에 필요한 자료를 생성하였으며 생성된 자료를 바탕으로 하천의 평면 및 단면의 변화특성을 조사할 수 있었다. 또한 경년별 저수로 형태와 하천 중심선 비교 분석을 통하여 저수로의 이동 및 변화 양상을 규명해 낼 수 있었으며 그 결과 댐 하류지역에서 하도안정문제가 발생하였음을 확인할 수 있었다. 본 연구 결과를 바탕으로 보다 효율적인 하도안정문제에 관한 대책수립이 가능하리라 보며, 이를 위해서는 하천 교란 조사기술 개발에 대한 연구가 뒤따라야 할 것이다.과적임을 알 수 있었다. 실험 결과 본 기법으로 유휴시간에 프로세서를 저전력모드로 바꾸는 기존의 고전적인 전력 관리 기법보다 전체 시스템 전력 소모를 9% 더 절약할 수 있었다. 위성영상과 DEM 개발기술이 87% 이상의 점수를 받아 가장 시장성 및 활용성이 높은 기술로 평가되었으며, 초다분광영상에 대한 기술은 70%를 겨우 넘는 수준에서 평가가 되었다. 멀티센서 공간영상정보 통합처리 기술 개발은 다목적 실용위성의 보유, 국가 NGIS 사업의 결과물이 상당히 축척이 되어 있고, 라이다(LiDAR) 기술의 도입을 위한 환경이 조성되었기에 다른 국가에 비해 멀티센서 기술의 적용과 산업화가 가시화 될 수 있을 것으로 기대된다. 그러나 멀티센서 자료의 수급이 용이하지 못하고, 법 제도적인 한계, 시장의 성숙도가 기대이하라는 점 등의 한계를 노정하고 있다.a var. sieboldii 3. Pinus densiflora, Q. aliena, Q. acutissima, P. thunbergii, Q. acuta 4. Carpinus laxiflora, Camellia japonicas. C. tschonoskii community의 5개 그룹으로 나타났다. 하류의 부착돌말류는 상대적으로 양호한 수질을 가지고 있는 정점 1에서 다양한 생물상을, 탄천의 영향을 받는 정점 2는 상대적으로 수질이 악화되어 호오염성 종들이 높은 분포를 나타내고 있었다. 또한 부착돌말류 중 Cymbella minuta는 다른 부착돌말류에 비해 강한 오염지표성을 나타내고 있었다.p=0.000, $4.76{\pm}3.31$

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2010

Using 3D point data implemented from terrestrial LiDAR, this research has modelled geospatial data in 2 categories(gridded & un-gridded) and conducted LOS analysis experiment using outcome from the modeling exercise. To compare LOS analysis results from each of the 2 models in the above, maximum LOS (line of sight) range in the experimental area was specified as 30m in Area A, 40m in Area B and 50m in Area C and the time taken by LOS analysis and the number of visible points were measured. As for the LOS analysis experiment results, in comparison with the gridded model, the un-gridded model took about 3.9 times more time in Area A, 5.4 times in Area B and 6.5 times in Area C. In addition, about 0.97 times fewer points were measured in Area A, 0.93 times in Area B and 0.94 times in Area C. The difference between gridded model and un-gridded model in terms of the time taken by LOS analysis increased, as the maximum LOS range extended. On the other hand, the number visible points did not vary significantly in reference to the size of visible range.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.361-373
• /
• 2013

The monitoring of urban area, target detection and building reconstruction have been actively studied and investigated since high resolution X-band SAR images could be acquired by airborne and/or satellite SAR systems. This paper describes an efficient approach to reconstruct artificial structures (e.g. apartment, building and house) in urban area using high resolution X-band SAR images. Building footprint was first extracted from 1:25,000 digital topographic map and then a corner line of building was detected by an automatic detecting algorithm. With SAR amplitude images, an initial building height was calculated by the length of layover estimated using KS-test (Kolmogorov-Smirnov test) from the corner line. The interferometric SAR phases were simulated depending on SAR geometry and changable building heights ranging from -10 m to +10 m of the initial building height. With an interferogram from real SAR data set, the simulation results were compared using the method of the phase consistency. One of results can be finally defined as the reconstructed building height. The developed algorithm was applied to repeat-pass TerraSAR-X spotlight mode data set over an apartment complex in Daejeon city, Korea. The final building heights were validated against reference heights extracted from LiDAR DSM, with an RMSE (Root Mean Square Error) of about 1~2m.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1043-1059
• /
• 2021

Forest and agricultural land are very important factors in the environmental ecosystem and securing food resources. Forest and agricultural land should be monitored regularly. CAS500-4 data are expected to be effectively used as a supplement of monitoring forest and agricultural land. Prior to the launch of the CAS500-4, the relative canopy height error analysis of the digital elevation model on South Korea was performed to determine the vertical target accuracy. Especially, by considering area of interest of the CAS500-4 (mountainous or agricultural area), it is conducted that vertical error analysis according to the slope and canopy. For Gongju, Jeju, and Samcheok, the average root mean squared differences were calculated compared to the drone LiDAR digitalsurface models, which were filmed in autumn and winter and the 5 m digital elevation model from the National Geographic Information Institute. As a result, the Shuttle radar topography mission digital elevation model showed a root mean squared differences of about 8.35, 8.19, and 7.49 m, respectively, while the Copernicus digital elevation model showed a root mean squared differences of about 5.65, 6.73, and 7.39 m, respectively. In addition, the root mean squared difference of shuttle radar topography mission digital elevation model and the Copernicus digital elevation model according to the slope angle were estimated on South Korea compared to the 5 m digital elevation model from the National Geographic Information Institute. At the slope angle of between 0° to 5°, root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model showed 3.62 and 2.52 m, respectively. On the other hands root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model respectively showed about 10.16 and 11.62 m at the slope angle of 35° or higher.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.151-164
• /
• 2022

According to the records of historical and instrumental earthquakes, the southeastern part of the Korean Peninsula is considered the highest seismic activity area. Owing to recent reports of numerous Quaternary faults along the Yangsan and Ulsan fault zones, paleoseismological studies are being actively conducted in these areas. The study area is located in the central part of the Ulsan fault zone, where the largest number of active faults have been reported. Based on lineament and geomorphic analysis using LiDAR images and aerial photographs, fault-related landforms showing topographic relief were observed and a trench survey was conducted. The trench length 20 m, width 5 m, depth 5 m is located approximately 300 m away to the northeast from the previously reported Malbang fault. From the trench section, we interpreted the geometric and kinematic characteristics of the fault based on the deformed features of the Quaternary sedimentary layers. The attitude of the reverse fault, N26°W/33°NE, is similar to those of the reported faults distributed along the Ulsan fault zone. Although a single apparent displacement of approximately 40 cm has been observed, the true displacement could not be calculated due to the absence of the slickenline on the fault plane. Based on the geochronological results of the cryogenic structure proposed in a previous study, the most recent faulting event has been estimated as being earlier than the late Wurm glaciation. We interpreted the thrust fault system of the study area as an imbrication structure based on the previous studies and the fault geometry obtained in this additional trench. Although several previous investigations including many trench surveys have been conducted, they found limited success in obtaining the information on fault parameters, which could be due to complex characteristics of the reverse fault system. Additional paleoseismic studies will contribute to solving the mentioned problems and the comprehensive fault evolution.

• Ecology and Resilient Infrastructure
• /
• v.4 no.1
• /
• pp.12-23
• /
• 2017

The Naeseong Stream is a meandering sand-bed stream flowing through mountains and has so long maintained its geomorphological uniqueness characterized by extensive braided bare bars. Recently, its long-lasting landscape has been changed due to encroachment of vegetation. In this study being a part of long-term monitoring research morphological changes of the 56.8 km long study reach of the Naeseong Stream, which occurred during the period of 2012 - 2016 were analyzed. Airborne LiDAR and terrestrial cross-section surveys were carried out. Hydrological and on-site investigation data were also collected. Among the main four sites, two bend reaches showed point bars enlarged, while along the other two straight reaches mid-channel bars were either newly formed or increased in area and height. At the highest deposition point of each bar, vertical changes which were caused by one or two times of sediment deposition amounted to 0.6 - 1.4 m. On the contrary channel bed degradation was not obvious. Overall morphological changes in the study reach were attributed to deposition of sediment which occurred during the flood in July 2016 on the bar surfaces vegetated during the precedent dry seasons. These kind of geomorphological processes are thought to be the same as those related to the existing mid-channel islands along the mid- and downstream reach of the Naeseong Stream.