• Nuclear Engineering and Technology
• /
• v.43 no.6
• /
• pp.547-556
• /
• 2011

Two computational methods for determining equilibrium states for the Mark-IV electrorefiner (ER) have been assessed to improve the current computational electrorefiner model developed at University of Idaho. Both methods were validated against measured data to better understand their effects on the calculation of the equilibrium compositions in the ER. In addition, a sensitivity study was performed on the effect of specific unknown activity coefficients-including sodium in molten cadmium, zirconium in molten cadmium, and sodium chloride in molten LiCl-KCl. Both computational methods produced identical results, which stayed within the 95% confidence interval of the experimental data. Furthermore, sensitivity to unavailable activity coefficients was found to be low (a change in concentration of less than 3 ppm).

• Korean Journal of Materials Research
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2005

The E.M.F. of the galvanic cell with fused salt was measured to determine the activities of zinc at 720-860 K over the entire composition range of liquid Zn-In and Zn-Sn alloys. The cell used was as follows: $$(-)W{\mid}Zn(pure){\mid}Zn^{2+}(KCl-LiCl){\mid}Zn(in\;Zn-In\;or\;Zn-Sn\;alloy){\mid}W(+)$$ The activities of zinc in the alloys showed positive deviation from Raoult's law over the entire composition range. The activity of cadmium and some thermodynamic functions such as Gibbs free energy, enthalpy and entropy were derived from the results by the thermodynamic relationship. The comparison of the results and the literature data was made. The liquid Zn-In and Zn-Sn alloys are found to be close tn the regular solution. The concentration fluctuations in long wavelength limit, $S_{cc}(o)$, in the liquid alloy were calculated from the experimental results.

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.15-22
• /
• 1991

The effects of electrolytes on color fastness properties of cotton fabric with Congo Red have been studied at $90^{\circ}C$. Each dyeing carried with $10 \times 10^{-6}M$ of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow 1. In the case of none, the fastness to washing became worse, but the fastness to light better with increasing dye concentration. 2. In the case of additing an electrolyte, the fastness to washing became worse and the fastness to light better than the case of none. The samples had become yellower after washing test. Yellowness had been reduced after fade-O-meter test. 3. What kind of electrolytes could not have any effect on the fastness to washing, but they influenced the fastness to light in the order of LiCl

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.793-798
• /
• 1995

A new chromoionophore sym-(decyl)(2-hydroxy-5-nitrobenzyloxy)-dibenzo-16-crown-5 (1) has been synthesized for $Na^+$ photometry in aqueous media. Apparent $pK_a$ values of 1 in the presence of 0.10 M LiCl, NaCl, and KCl were measured by spectrophotometry in 50% 1,4-dioxane-50% water (v/v) and compared with the $pK_a$ of 8.68 in the presence of 0.10 M TMACl. A significant $pK_a$ shift to a lower pH was only observed for $Na^+$ (${\Delta}pH=1.31$) due to selective binding of 1 with $Na^+$. Based upon this $pK_a$ shift, chromoionophore 1 was found to selectively respond to $Na^+$ with a detection limit of $10^{-3}M$ and no interference from $K^+$ up to 0.05 M for detection of 10.0 mM $Na^+$ in 50% 1,4-dioxane-50% water (v/v).

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1339-1346
• /
• 2024

Electrorefining in molten salts is used for purifying actinides. Optimizing electrorefining is key to minimizing processing time and radiological waste. One possible way of improving electrorefining efficiency is using an AC superimposed DC waveform. This waveform has demonstrated potential benefits in aqueous solutions but has never been utilized in a molten metal, molten salt application. This work investigates the effects of using an AC superimposed DC waveform on molten bismuth electrorefining in a molten LiCl-KCl-CaCl2 eutectic. Bismuth has been identified as a potential surrogate for plutonium electrorefining and a potential cathode in electrorefining used nuclear fuel (UNF). All electrorefining runs resulted in a high purity cathode ring and high yield with exception of the run using a low-frequency, high-amplitude superimposed AC waveform, which experienced some contamination and a lower yield. The other three AC superimposed DC runs experienced an average yield 6.7 % higher than the average yield of the DC runs. The electrorefining run using the high-frequency, high-amplitude superimposed AC signal had the highest yield. It is recommended in future studies to investigate the statistical variability of electrorefining yield and current efficiency and the impact of AC superimposed DC waveforms on solidified bismuth anodes.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.10-18
• /
• 1996

Experiments were carried out to find the possibility of an economic production of single cell protein(SCP) in mixed culture by Cellulomonas sp. KL-6 and a second organism. The second organism, strain LI-10, was isolated from the large intestines of a mouse. 1. When these strains were mixed, cell growth and carboxymethyl cellulase (CMCase) activity were increased to about 63% and 161%, respectively compared with that of single culture of strain KL-6. We found the mixed culture as a proper method of degradation of cellulose in our study. 2. Strain LI-10 was identified as E. coli. 3. This strain produced trace amounts of cellobiose, but glucose was not found in detectable amounts in the filter paper(FP) medium. 4. $CaCO_3$ injected in the medium at the ratio of 0.1% not only enhanced cell growth but also was effective as an acid neutralizing agent. 5. When this organism was cultured under the optimal medium (glucose 0.1%, $NH_4Cl$ 0.1%, yeast extract 2.0%, $KH_2PO_4$ 0.1%, KCl 0.05%, pH 7.2 and a temperature 30$\circ$C) for 5 days, a cell mass produced 1.18 g/l. The results showed the increase of cell mass up to 300% compared to 0.28 g/l produced in CMC medium.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.321-332
• /
• 2017

In order to build a general model of a high-throughput uranium electrorefining process according to the electrode configuration, numerical analysis was conducted using the COMSOL Multiphysics V5.3 electrodeposition module with Ordinary Differential Equation (ODE) interfaces. The generated model was validated by comparing a current density-potential curve according to the distance between the anode and cathode and the electrode array, using a lab-scale (1kg U/day) multi-electrode electrorefiner made by the Korea Atomic Energy Research Institute (KAERI). The operating temperature was $500^{\circ}C$ and LiCl-KCl eutectic with 3.5wt% $UCl_3$ was used for molten salt. The efficiency of the uranium electrorefining apparatus was improved by lowering the cell potential as the distance between the electrodes decreased and the anode/cathode area ratio increased. This approach will be useful for constructing database for safety design of high throughput spent nuclear fuel electrorefiners.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.11
• /
• pp.1933-1942
• /
• 2016

A novel ${\alpha}-glucoside$ hydrolase (named PspAG97A) from glycoside hydrolase family 97 (GH97) was cloned from the deep-sea bacterium Pseudoalteromonas sp. K8, which was screened from the sediment of Kongsfjorden. Sequence analysis showed that PspAG97A belonged to GH97, and shared 41% sequence identity with the characterized ${\alpha}-glucoside$ BtGH97a. PspAG97A possessed three key catalytically related glutamate residues. Mutation of the glutamate residues indicated that PspAG97A belonged to the inverting subfamily of GH97. PspAG97A showed significant reversibility against changes in salt concentration. It exhibited halophilic ability and improved thermostability in NaCl solution, with maximal activity at 1.0 M NaCl/KCl, and retained more than 80% activity at NaCl concentrations ranging from 0.8 to 2.0 M for over 50 h. Furthermore, PspAG97A hydrolyzed not only ${\alpha}-1,4-glucosidic$ linkage, but also ${\alpha}-1,6-$ and ${\alpha}-1,2-glucosidic$ linkages. Interestingly, PspAG97A possessed high catalytic efficiency for long-chain substrates with ${\alpha}-1,6-linkage$. These characteristics are clearly different from other known ${\alpha}-glucoside$ hydrolases in GH97, implying that PspAG97A is a unique ${\alpha}-glucoside$ hydrolase of GH97.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1994

In the present work, to clarify the mechanism of the neutral salt effect on the alkaline hydrolysis of PET, many salts with different cations like LiCl, NaCl, KCl, CsCl were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous solutions of many salts in alkali metal hydroxides under various conditions. Some conclusions obtained from the experimental results were summarized as follows. The reaction rate of the alkaline hydrolysis of PET was increased by the addition of neutral salts and In k was increased nearly linearly with the square root of ionic strength of reaction medium. This fact suggested that the ionic strength effect by Debye-Huckel and Bronsted theory was exerted on the reaction. The specific salt effect was also observed. The reaction rate was increased with the increase in the electrophilicity of cations of neutral salts, i. e., in the order of $Cs^+$/ < $K^+$/ $a^+$/ $i^$^+$. It was considered that the reaction rate was increased in the order of C $s^+$. < $K^+$. $a^+$. $i^+$. because the lowering effect of the cations on the negative charge of PET surface was increased with the electrophilicity of cations. It was thought that $E_{a}$ was increased because the cations of neutral salts decreased the negative charge of PET surface. It, however, was inferred from the increase in ${\Delta}$S＊ and the decrease in the ${\Delta}$G＊ that the cations of neutral salts associated with PET increased the collision frequency between carbonyl carbon and OH- ion and then accelerated the reaction rate.te.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.150-164
• /
• 2004

According to the Korean long-term plan for nuclear technology development, KAERI is conducting a few R&D projects related to the proliferation-resistant back-end fuel cycle. The R&D activities for the back-end fuel cycle are reviewed in this work, especially focusing on the study of the partitioning and transmutation(P&T) of long-lived radionuclides. The P&T study is currently being carried out in order to develop key technologies in the areas of partitioning and transmutation. The partitioning study is based on the development of pyroprocessing such as electrorefining and electrowinning because they can be adopted as proliferation-resistant technologies in the fuel cycle. In this study, various behaviors of the electrodeposition of uranium and rare earth elements in the LiCl-KCl electrorefining system have been examined through fundamental experimental work. As for the transmutation system, KAERI is studying the HYPER (HYbrid Power Extraction Reactor), a kind of subcritical reactor which will be connected with a proton accelerator. Up to now, a conceptual study has been carried out for the major elemental systems of the subcritical reactor such as core, transuranic fuel, long-lived fission product target, and the Pb-Bi cooling system, etc. In order to enhance the transmutation efficiency of the transuranic elements as well as to strengthen the reactor safety, the reactor core was optimized by determining its most suitable subcriticality, the ratio of height/diameter, and by introducing the concepts of optimum core configuration with a transuranic enrichment as well as a scattered reloading of the fuel assemblies.