• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1085-1089
• /
• 2004

An impedance properties of the positive active material Li(Cr$_{0.4}$Mn$_{0.6}$)O$_2$ are measured by the changeable trend to the time. The charge-discharge capacities of 297 mAh(g)$^{-1}$ 175 mAh(g)$^{-1}$ are obtained by the made cell with the active material that the Cr was added to LiMnO$_2$ to prevent structural degradation of an electrode active material with impedance of 75 Ω to get at an initial hour. Resultantly, these variations which the impedances enhanced continually, were not watched the impeditive variations as the results of the delay time that the positive thin films and the references have been soaked all together in the solution of electrolyte of 1M LiPF$_{6}$ EC/DEC(l/2). Accordingly, it means an amount increased of the discharged capacities in the view of the results that the impeditive values were decreased are known already through a authorized paper.per.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1594-1596
• /
• 1997

$LiMn_2O_4$ is prepared by reacting stoichiometric mixture of LiOH $H_2O$ and $MnO_2$ (mole ratio 1 : 2) and calcinating at $800^{\circ}C$ for 24h, 36h, 48h, 60h and 72h. At X-ray diffraction, cathode active materials calcined at $800^{\circ}C$ for 36h. (111)/(311) peak ratio was 0.37. It was that crystal structure is formed very well. In the result of charge/discharge test, when heated at $800^{\circ}C$ for 36h, charge/discharge characteristics of $LiMn_2O_4$ is the best and Super-s-black sort of conductive agent showed well property. Also, AC impedance creased gradually during cycling and stabilized after 10cycle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.299-305
• /
• 2003

The battery industries have been developed to the implementation of lithium ion secondary cell from the cell of Ni/Cd and Ni/MH in the past to be asked of an age of high technology from low technology. Also in resent the polymeric cell to get a good high function with an age of new advanced information system is changed from the 21 century to the secondary batteries society. The properties of lithium secondary batteries have the high energy density, the long cycle time, the low self discharge area and the high active voltage. The wanted properties of secondary batteries for the motion of an apparatuses of industries of an high skill age have a small type trend of the energy density and it is become with a strong asking of the industrial society market about the storable medium of the convenience and new power energy. The electrochemical properties is researched for the cell to be synthesised and crystallized the positive active material LiMnO2 of the secondary cell at 9250C to get a new improved data of the electric discharge for that the capacitance of the LiMnO2 thin film that is improving and researching with the properties and a merit and demerit in the this kind of asking.

• 대한화학회지
• /
• 제50권3호
• /
• pp.243-246
• /
• 2006

박막은 Pt/Ti/SiO2/Si 기판 위에 구연산 졸을 이용하여 spin coating에 의해 제작하였다. 기판위에 코팅된 구연산 졸을 380oC에서 15분간 건조시킨 후 750oC에서 10분간 열처리하여 박막을 얻었다. 얻어진 박막은 X-선 회절분석 결과 R3m의 결정구조를 가짐을 알수 있었고, 전기화학적 특성의 측정결과 1차 방전용량은 0.35Ah/cm2-m로 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.81-84
• /
• 2003

Conductive polyaniline(PANI)-camphosulfonic acid (CSA) film applied as a hole injection layer in ITO/PANI/P3HT/LiF/Al device. In the AFM images, electrochemically polymerized PANI-CSA films have the small particles and smooth sufficient for application as hole injection layer. By insertion of PANI-CSA buffer layer, the turn on voltage of ITO/PANI/P3HT/LiF/Al device lowed by 3V, whereas that of ITO/P3HT/LiF/Al device shows 5V.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1224-1229
• /
• 2004

The purpose of this study is to research and develop tin oxide-flyash composite for lithium Ion polymer battery. Tin oxide is one of the promising material as a electrode active material for lithium Ion polymer battery (LIPB). Tin-based oxides have theoretical volumetric and gravimetric capacities that are four and two times that of carbon, respectively. We investigated cyclic voltammetry, AC impedance and charge/discharge cycling of SnO$_2$-flyash/SPE/Li cells. The first discharge capacity of SnO$_2$-flyash composite anode was 639 mAh/g. The discharge capacity of SnO$_2$-flyash composite anode was 563 and 472 mAh/g at 6th and 15th cycle, respectively. The SnO$_2$-flyash composite anode with PVDF-PMMA-PC-EC-LiClO$_4$ electrolyte showed good capacity with cycling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.420-421
• /
• 2005

$LiMnPO_4$ particle were prepare by a hydrothermal reaction. The particles prepared by adding polyethylene glycol(PEG) and carbon to the starting reaction solution were fine crystalline in the range of 200-300nm. The discharge capacity of the sample as a lithium secondary battery was $25mAhg^{-1}$ at $0.04mAcm^{-2}$, larger than that of the sample prepared by the hydrothermal method without PEG and carbon.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1328-1332
• /
• 2001

The structure and electrochemical properties of the LixCoyNi1-yO2 (y=0.1, 0.3, 0.5, 0.7, 1.0) system synthesized by solid state reaction with various starting materials have been investigated to optimize the characteristics and synthetic conditions of the LixCoyNi1-yO2. The first discharge capacities of LixCoyNi1-yO2 are 60 mAh/g-180 mAh/g with synthetic conditions. Among them, the LixNi0.7Co0.3O2, which was prepared with LiOH, NiO, and Co3O4 at $850^{\circ}C$, had the best electrochemical properties. The first discharge capacity of the compound was 180 mAh/g.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.339-346
• /
• 2022

Silicon (Si) has attracted considerable attention due to its high theoretical capacity compared to conventional graphite anode materials. However, Si-based anode materials suffer from rapid capacity loss due to mechanical failure caused by large volume change during cycling. To alleviate this phenomenon, crosslinked polymeric binders with strong interactions are highly desirable to ensure the electrode integrity. In this study, thermally crosslinked polyimide binders were used for Si-alloy anodes in Li-ion batteries. The crosslinked polyimide binder was found to have high adhesion strength, resulting in enhanced electrode integrity during cycling. Therefore, the Si-alloy anodes with crosslinked polyimide binder provide enhanced electrochemical performance, such as Coulombic efficiency, capacity retention, and cycle stability.