• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.276-281
• /
• 2005

$LiNi_{1-y}M_{y}O_{2}(M=Zn^{2+},\;Al^{3+},\;and\;Ti^{4+},\;0.000\{\le}y{\le}0.100)$ were synthesized by the combustion method by calcining in $O_{2}$ stream at $750^{\circ}C$ for 36 h. XRD analyses, observation by FE-SEM and measurement of the variation of discharge capacity with the number of cycles were carried out. The composition $LiNi_{0.99}M_{0.01}O_{2}(M=Zn^{2+},\;Al^{3+},\;and\;Ti^{4+})$ of all the compositions showed relatively good electrochemical properties. $LiNi_{0.99}M_{0.01}O_{2}$ exhibited poor crystallinity and $LiNi_{0.99}M_{0.01}O_{2}$ showed the cation mixing of large fraction. $LiNi_{0.99}M_{0.01}O_{2}$ with improved cycling performance showed good crystallinity and the cation mixing of small fraction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.309-310
• /
• 2006

In this paper, frequency characteristic of FBAR was studied as a function of annealing temperature. we have used Li dopant to enhance electrical properties of ZnO thin film. Li:ZnO thin film was deposited on Al(300 nm)/$SiO_2$(500 nm)/Si($500\;{\mu}m$) and each layer was patterned. Thermal treatment was executed in range of between 300 and $600^{\circ}C$ in $O_2$ ambient. We observed that the resistivity of ZnO is enhanced under the influence of Li doping and return loss in FBAR frequency properties is improved through annealing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.361-366
• /
• 2002

Spinel $LiMn_{2-y}M_yO_4$ and $LiMn_{2-y}M_yO_4$ (M=Mg, Zn) powders were synthesized by solid-state method at $800^{\circ}C$ for 37h. Crystal structure and electrochemical properties were analyzed by X-ray diffraction, charge-discharge test, cyclic voltammetry and ac impedance to $LiMn_{2-y}M_yO_4$. All cathode material showed spinel structure in X-ray diffraction. Ununiform distortion which calculated by (111) face and (222) face was almost constant in spite of the change of the kind and the substituting ratio of the metal cation in $LiMn_{2-y}M_yO_4$ (M=Mg, Zn). $LiMn_{1.9}Mg_{0.05}Zn_{0.05}O_4/Li$ cell substituted $Mg^{+2}$ and $Zn^{+2}$ showed excellent discharge capacities than other cells, which it presented about 120mAh/g at the 1st cycle and about 73mAh/g at the 250th cycle, respectively. AC impedance of $LiMn_{2-y}M_yO_4/Li$ cells showed the similar resistance of about 65~110$\Omega$ before cycling.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.282-285
• /
• 2012

It is well known that Zinc Oxide (ZnO) is an attractive material for its various applications. ZnO has been mostly used as a transparent conducting oxide in liquid crystal displays, solar cells due to its advantages of low cost, high productivity, and excellent electrical conductivity. Notably, flexible-dye-sensitized solar cells (DSSCs) based on polyethylene terephthalate (PET) substrates require low temperature sintering processing conditions. Therefore, low temperature processing conditions have been strongly required for transparent conducting film applications. In this paper, we prepared low temperature-sintered ZnO ceramics employing Li as a sintering aid.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.183-190
• /
• 1996

Single crystals of ZnO were grown hydrothermally with KOH solution in silver lined autoclave. The effect of LiOH and NH4OH on the morphology of as-grown crystals was studied. As-grown crystals were pale green and the maximum size was 30×30×20mm3. Addition of LiOH reduced the density of flaws on the (0001) face of as-grown ZnO crystals. In highly concentrated KOH solution, ZnO had a strong tendency to grow along the c-axis. When 1.0-2.0 M of NH4OH was added into mineralizer, growth rate along the direction of a-axis increased. From this result, ZnO single crystals of equant-faced hexagonal prism could be grown with acicular seeds.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.947-950
• /
• 2004

[ $ZnCr_2O_4$ ]에 $Li_2CO_3$를 $5{\sim}30wt%$ 범위에서 정량적으로 첨가한 감습재료에서 screen printing법으로 알루미나 기판 위에 후막으로 인쇄하고 $650\sim750^{\circ}C$에서 소결하여 후막 습도센서를 제작하였으며, $30\sim90%RH$ 범위에서 상대습도에 따른 저항 및 정전용량 특성을 조사하였다. $ZnCr_2O_4$에 $Li_2CO_3$가 5wt%가 첨가된 조성의 센서는 70%RH이상에서, 25wt%이상 첨가된 조성의 센서는 40%RH이하에서 저항 및 정전용량이 급격히 변화하는 switching 현상을 나타내었다. 반면, $ZnCr_2O_4$에 $Li_2CO_3$가 15wt%가 첨가된 조성의 센서는 선형적으로 저항은 감소하였고, 정전용량은 증가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.455-458
• /
• 2001

Spinel $LiMn_{2-y}$$M_{y}$ $O_4$powder was prepared solid-state method by calcining the mixture of LiOH - $H_2O$, Mn $O_2$, ZnO and MgO at 80$0^{\circ}C$ for 36h. To investigate the effect of substitution with Mg, Zn cation, charge-discharge experiments and initial impedance spectroscopy performed. The structure of $LiMn_{2-y}$$M_{y}$ $O_4$crystallites was analyzed from powder X-ray diffraction data as a cubic spinel, space group Fd3m. all cathode material showed spinel phase based on cubic phase in X-ray diffraction. Ununiform which calculated by (111) face and (222) face was constant in spite of the change of y value, except PUf\ulcorner LiM $n_2$ $O_4$. The discharge capacities of the cathode for the cation subbstitUtes $LiMn_{2-y}$$M_{y}$ $O_4$/Li cell at the 1st cycle and at the 40th cycle were about 120~124 and 108~112mAh/g except LiM $n_{1.9}$Z $n_{0.1}$ $O_4$/Li cell, respectively. This cell capacity is retained by 93% after 40th cycle. AC impedance of $LiMn_{2-y}$$M_{y}$ $O_4$/Li cells revealed the similar resistance of about 65~110$\Omega$ before cycling. before cycling.g.g.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.235-239
• /
• 2006

ZnO-doped near-stoichiometric $LiNbO_3$ single crystals of $0.8{\sim}1.0mm$ diameter and $30{\sim}35mm$ length were grown by the micro-pulling down (U-PD) method. The structure of the grown crystals was confirmed by powder x-ray diffraction (XRD) patterns. Electron probe micro analysis (EPMA) showed that Zn ions were homogeneously incorporated In grown crystals. The threshold in ZnO doping level was confirmed that an abrupt change in the features of $OH^-$ absorption band as doping level reaching about 2 mol%.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2949-2954
• /
• 2012

Nano ZnO with an average size of 8 nm was prepared by thermal decomposition of zinc oxalate at $450^{\circ}C$. A series of based composite polymer electrolyte PEO-$LiClO_4$ and nano ZnO as a filler have been synthesized using solution cast technique, with varying the filler ratio systematically. XRD, DSC and FTIR studies have been conducted to investigate the structure and interaction of different groups in the composite polymer electrolyte. Effect of nano ZnO ceramic filler concentration on the structure of composites and their electrical properties (DC-conductivity, AC-conductivity, dielectric constant, dielectric loss and impedance) at different frequencies and temperatures was studied. Melting temperature ($T_m$) of PEO decreased with the addition of both $LiClO_4$ salt and nano ZnO filler due to increasing the amorphous state of polymer. All composite samples showed an ionic conductivity. The maximum room temperature ionic conductivity is found for $(ZnO)_{0.5}(PEO)_{12}(LiClO_4)$ composite sample. All the results are correlated and discussed.